Catalog of Capability Brochures for:
SwRI Mechanical Engineering

BROCHURE TITLES	TECHNICAL CONTACT
Advanced Technology For Orthopaedics	Dr. Daniel P. Nicolella
Aircraft Bonded Repair of Metallic Structures	David H. Wieland
Aircraft Damage Tolerance Analysis	Luciano Smith
Aircraft Risk Analysis	Joseph W. Cardinal
Aircraft Structural Analysis	Dr. Kenneth E. Griffin
Aircraft Structural Integrity	Dr. Hal Burnside
Aircraft Usage Assessment and Spectra Development	Kurt H. Schrader
Altering Material Surfaces to Prolong Service Life	Dr. Ronghua Wei
Analysis and Evaluation Services for Rolling Element Bearings	Dr. Klaus Brun
Analytical Penetration Modeling	Dr. J. D. Walker
Applied Biomaterials	Dr. Michael A. Miller
Applied Solid and Fracture Mechanics	Dr. Carl F. Popelar
Armor Mechanics	Dr. Charles Anderson, Jr.
Assuring the Safety of Natural Gas Vehicles	Dr. Stephen J. Hudak Jr.
Biomaterials: Body Parts of the Future	Dr. Michael A. Miller
Blast Containment Design	P. A. Cox
Catalysis and Reaction Engineering	Dr. Michael A. Miller
Center for Applied Optics and Photonics	Thomas Moore
Characterization of Dynamic Material Response	Dr. K.  A. Dannemann
Component Qualification for Nuclear Plants	Jenny Ferren
Compressor Design Studies	Jason Gatewood
Computational Fluid Dynamics	Dr. Christopher Freitas
Computational Mechanics	Dr. Christopher Freitas
Corrosion Evaluation and Mitigation Technologies	Dr. Elizabeth Trillo
Corrosion Monitoring Sensor Technology	James F. Dante
Corrosion Monitoring & Testing of Concrete & Steel Structures	Dr. Leonardo Caseres
Deep Ocean Pressure Simulation Testing	Jesse I. Ramon
Design and Development of Biomedical Materials	Gianny Rossini
Dynamic Hose Testing	Joseph E. Crouch
Dynamic Loading on Vehicle Systems	Donald J. Grosch
Electromagnetic Compatibility Research	Jenny Ferren
Elevated Temperature Test Facility*	Shane P. Siebenaler
Engineering Dynamics	Dr. Charles Anderson, Jr.
Evaluation of Material Performance in the Energy Industry	Dr. Elizabeth Trillo
Explosion Hazards Evaluation	P. A. Cox
Failure Analysis of Structural Systems and Components	Dr. Richard A. Page
Fitness-For-Service	Joseph E. Crouch
Flowing Gas Test Facility*	Shane P. Siebenaler
Fluid Dynamics and Multiphase Flow	Chris Buckingham
Fluid Dynamics in Space Vehicles	Danny M. Deffenbaugh
Fluid Pipeline Modeling Services	Augusto Garcia-Hernandez
Fuel Cell Technology	Dr. Kent Coulter
Gas Turbine Analytical Services	Grant O. Musgrove
Gas Turbine Technology	Dr. Sastry Cheruvu
Gas Turbine and Centrifugal Compressor Performance Testing	Dr. T. Sean Tavares
Gas Turbine Technology and Engineering Services	Dr. Sastry Cheruvu
High-Pressure Gas Property Measurements	Dr. Klaus Brun
Impact Assessment on Safety Structures and Aircraft Components	Scott A. Mullin
Impact Shield Design & Testing	P. A. Cox
Investigation of Corrosion in Fuel Systems	James F. Dante
Ion Surface Engineering	Dr. Kent E. Coulter
Liquid Test Facility	Shane P. Siebenaler
Magnetostrictive Sensors	Dr. Sergey Vinogradov
Magnetostrictive Sensors (MsS®) Instrument for Guided Wave Research (Flyer)	Dr. Sergey Vinogradov
Magnetostrictive Sensor (MsS®) Technology and System	Dr. Glenn M. Light
Manufacturing Assistance For Medical Devices	Dr. Keith Bartels
Marine Systems	Joseph E. Crouch
Materials and Structures	Dr. Ben H. Thacker
Measurement of Ballistic and Explosive Events	Donald J. Grosch
Mechanical and Fluids Engineering Brochure	Danny M. Deffenbaugh
Mechanical and Fluids Engineering Flyer*	Danny M. Deffenbaugh
Medical Device Development	Dr. Keith Bartels
Medical Imaging Research and Device Development	Dr. Keith A. Bartels
Medical Sensor Development	Dr. Keith A. Bartels
MEMS: Microelectromechanical Systems	Dr. Stephen Hudak, Jr.
Metering Research Facility	Terrence A. Grimley
Multiphase Flow Facility	Flavia Viana
Multiphase Flow R&D	Danny M. Deffenbaugh
Nanotechnology	Dr. Michael A. Miller
NDE Research and Materials Characterization	Dr. Glenn M. Light
NASGRO	Joseph W. Cardinal
NESSUS: A New Tool for Safer Structures	Dr. Ben Thacker
Nondestructive Evaluation Technology for Material & Component Characterization	Dr. Glenn M. Light
Oil & Gas Industry Support	Joseph E. Crouch
Penetration Mechanics	Dr. Charles Anderson, Jr.
Performance Verification Testing of Valves and Components	Jesse L. Ramon
Photonics Technology	Dr. Kent E. Coulter
Physical Environmental Testing Services	Jenny Ferren
Engineering Services for the Pipeline & Compression Industry	Klaus Brun
Pipeline Integrity	Dr. Frank Song
Plasma Immersion Ion Processing	Dr. Kent E. Coulter
Plastic- and Fiberglass-Reinforced Pipe Research	Carl Popelar
Polymer High-Pressure High-Temperature Exposure Testing	Gus Vasquez Jr.
Polymers and Polymer Composites	Mike Ladika
Preceramic Polymer Derived Si3N4 Composites with Continuous Fiber Reinforcement	Dr. Richard A. Page
Prediction of Material Performance	James F. Dante
Pressure Vessel Design and Fabrication	Matthew W. James
Probabilistic Mechanics and Reliability Engineering	Dr. Ben H. Thacker
Research and Development in Tubular Products	George K. Wolfe
Root Cause Failure Diagnosis	Dr. Klaus Brun
Services for Natural Gas Distribution Systems	Ed Bowles
Small Arms Testing	Donald J. Grosch
Solid and Fracture Mechanics Laboratory*	Dr. Carl F. Popelar
Spacecraft Impact Testing and Hazards Analysis	Donald J. Grosch
Standardized Corrosion Testing	Dr. Elizabeth Trillo
Static and Fatigue Testing of Full-Scale Aircraft Structures	Jody Cronenberger
Structural Analysis and Experimental Strain/Stress Measurement Technology	Jesse I. Ramon
Structural Design for Physical Security	P. A. Cox
Structural Dynamics and Acoustics	Tim Fey
Structural Engineering	Dr. Hal Burnside
Technical Expertise for the Oil & Gas & Offshore Pipeline Industries	Dr. Hal Burnside
Test Services for Offshore Insulation and Corrosion Protection Systems	Jesse I. Ramon
Testing and Evaluation of Medical Devices	Dr. Keith Bartels
Testing Composite CNG Vehicle Fuel Cylinders	Dr. Stephen J. Hudak Jr.
Testing Services for the Telecommunications Industry*	Tim Fey
Total System Engineering for Offshore and Marine Operations	Joseph E. Crouch
Valve and Flow Component Testing	Shane P. Siebenaler
Vehicle Components	Mike Ladika
Verification Testing of Gate Valves per API Specification 6A*	Jesse Ramon
Virtual-Long Multiphase Loop	Flavia Viana
Weapons of Mass Destruction (WMD) Countermeasures and Neutralization	Scott A. Mullin
Wind Power Technology Services	Dr. Jeff Moore

Mechanical  Engineering Division Publications
SwRI Brochures SwRI Publications SwRI Home

May 02, 2013