SOUTHWEST RESEARCH INSTITUTE

 

Black Carbon Particle Calibration Facility Ultrafine and Nanoparticle from 300 to 10 Nanometers

 

Search SwRI

   

               SwRI Home | Print Version







  Image: Soot agglomerates of combustion generated particles
 

Soot agglomerates of combustion generated particles

  Image: Particle generation system with the catalytic stripper technology
 

Particle generation system with the catalytic stripper technology

A particle calibration facility has been launched by Southwest Research Institute (SwRI) that uses dry soot particles produced by a propane flame based on the miniCAST technology coupled with an SwRI-patented catalytic stripper.

 

Specifications

This calibration facility is located at Southwest Research Institute in San Antonio, Texas, and is capable of producing:

  • Particle mass concentrations ranging from 5 μg/m³ to 80 mg/m³, with less than 5% coefficient of variation

  • Particle number concentrations ranging from 10 part./cm³ to 5 x 107 part./cm³, with less than 5% coefficient of variation

  • Particle size distributions with geometric number mean diameters ranging from 15 nm to 120 nm

  • Flow rates up to 50 standard liters per minute

Instrumentation

This facility is supported with state-of-the-art instrumentation such as:

  • TSI's Scanning Mobility Particle Sizer

  • TSI's Engine Exhaust Particle Sizer

  • TSI electrometer

  • TSI condensation particle counters

  • AvL Technologies™ micro-soot sensor

  • Sunset Laboratory semi-continuous organic carbon/elemental carbon, with traceable elemental carbon capability

Capabilities

This facility is suitable for:

  • Calibration and verification of solid particle measurement systems in compliance with Euro 5, 6 and Euro VI regulations

  • Particle instrument and dilution systems calibrations and performance checks

  • Research and development on small-scale particle filters (filters can be evaluated at temperatures ranging from 25°C to 400°C)

  • Particle inhalation studies

  • Fundamental research on the affect of black carbon on global warming

For more information about our black carbon particle calibration facility, or how you can contract with Southwest Research Institute (SwRI), please contact Imad Khalek, Ph.D., at ikhalek@swri.org or

(210) 522-2536.

 

bcpcal.swri.org

 

Contact Information

Imad Khalek, Ph.D.

Black Carbon Particle Calibration Facility

(210) 522-2536

ikhalek@swri.org

bcpcal.swri.org

Related Terminology

black carbon

particle calibration

soot particles

miniCAST

TSI

particle filters

global warming

particle inhalation studies

Related Link

Black Carbon Particle Facility Flyer

| Emissions R&D | Engine, Emissions & Vehicle Research Division | SwRI Home |

Southwest Research Institute® (SwRI®), headquartered in San Antonio, Texas, is a multidisciplinary, independent, nonprofit, applied engineering and physical sciences research and development organization with 11 technical divisions.

December 28, 2012