Sensors
Life Prediction
Evaluation
Failure Simulation
Failure Prevention
Product Evaluation
Publications
Facilities
Links
Contact Us
SwRI Information
Home
|
Darrell Dunn
James Dante
Julio G. Maldonado
|
Marta Jakab
Frank Song
Garth Tormoen
Lietai Yang
|
Narasi Sridhar
A. Anderko, N. Sridhar, and D.S. Dunn, 2004, A
General model for the repassivation potential as a function
of multiple aqueous solution species, Corrosion Science,
46, pp. 1583-1612.
N. Sridhar, C.S. Brossia, D.S. Dunn, and A. Anderko,
2004, Predicting Localized Corrosion in Seawater, Corrosion, v.60 (10), pp. 915-936.
N. Sridhar, D.S. Dunn, A.M. Anderko, M.M. Lencka, and
H.U. Schutt, 2001. Effects of water and gas compositions on
the internal corrosion of gas pipelines – modeling and
experimental studies, Corrosion, 57 (3): 221-235.
N. Sridhar, D.S. Dunn, and M. Seth, 2001, Application
of a general reactive transport model to predict environment
under disbonded coatings, Corrosion, 57 (7), 598-613.
Y.M. Pan, D.S. Dunn, G.A. Cragnolino, and N. Sridhar,
2000. Grain boundary chemistry and intergranular corrosion
in alloy 825, Metallurgical and Materials Transactions
A, 31A, 1163 - 1173. G.A. Cragnolino,
S. Mohanty, D.S. Dunn, N. Sridhar,
and T.M. Ahn, 2000, An approach to assessment of high-level
radioactive waste containment. I: Waste package degradation,
Nuclear Engineering and Design, 201, 289-306.
N. Sridhar and D.S. Dunn, 1997. In Situ study of salt
film stability in simulated pits of nickel by Raman and
electrochemical impedance spectroscopies, J. Electrochem.
Soc., 144 (12), 4243-4253
Y.M. Pan, N. Sridhar, D.S. Dunn, and G.A. Cragnolino,
1996. Effect of specimen preparation procedures on chromium
depletion and precipitation chemistry in alloy 825 by
analytical electron microscopy, J. of Materials Science
Letters, 15, 522-524.
D.S. Dunn, N. Sridhar, and G.A. Cragnolino, 1996.
Long-term prediction of localized corrosion of alloy 825 in
high-level nuclear waste repository environments, Corrosion, 52(2), p. 115-124. G. Cragnolino, D.S. Dunn, and N. Sridhar, 1996.
Environmental factors in the stress corrosion cracking of
type 316L stainless steel and alloy 825 in chloride
solutions. Corrosion, 52(3): 194-203
D.S. Dunn, N. Sridhar, and G. Cragnolino. 1994.
Effects of Surface Chromium Depletion on the Localized
Corrosion of Alloy 825 as a High-Level Waste container
Material. Corrosion/94. Paper 138. NACE. (To be
published in Corrosion Journal).
N. Sridhar and D.S. Dunn. 1994. Effect of Applied
Potential on Changes in Solution Chemistry Inside Crevices
on Type 304L Stainless Steel and Alloy 825. Corrosion,
50 (11): 857-872.
N. Sridhar and G.A. Cragnolino. 1993. Applicability
of Repassivation Potential for Long-Term Prediction of
Localized Corrosion of Alloy 825 and Type 316L Stainless
Steel. Corrosion. V.49, No.11, pp 885-894.
N. Sridhar and G.A. Cragnolino. 1993. Effects of
Environment on Localized Corrosion of Copper Based
High-Level Waste Container Materials. Corrosion.
V.49, No.12, pp 967-976. G.A. Cragnolino and N. Sridhar. 1991. Localized
corrosion of a Candidate Container Material for High-Level
Nuclear Waste Disposal. Corrosion. V.47. No.6. p.464.
N. Sridhar and P. Crook. 1989. Designing an Alloy to
Resist Corrosion and Wear. J. of Metals. V.41. p.22.
N. Sridhar. 1988. Behavior of High Performance Alloys
in Sulfuric Acid. Materials Performance. V.25. No.3.
p.40. N. Sridhar and J. Kolts. 1987. Effect of
Nitrogen on the Selective dissolution of Duplex Stainless steels. Corrosion
V.43. No.11. p.646.
N. Sridhar, J.B.C. Wu, and S.M.
Corey. 1987. Corrosion of Ni-base Alloys in Acid Mixtures. Materials Performance. V.24. No.10. p.17.
N. Sridhar, J. Kolts, and M.V. Zeller. 1986.
Correlation of Microstructure and Selective dissolution in
Ferralium alloy 255. Metallography and Corrosion.
(J. L. McCall et al. eds.). NACE. Houston. p.105. G.O. Davis, N. Sridhar, and J. Kolts. 1986.
Polarization Effects in Galvanic Corrosion Corrosion.
V.42. No.6. p.329.
D.S. Dunn, G.A. Cragnolino, and N. Sridhar, An
electrochemical approach to predicting long-term localized
corrosion of corrosion resistant high-level waste container
materials, Corrosion, 56(1): 90 - 104. J. Kolts and N. Sridhar. 1985. Environmental
Embrittlement of Ni-base Alloys - An analogy to Steels. J.
Materials for Energy Systems. V.8, No.3. p.306.
N. Sridhar and J. Kolts. 1985. A Duplex Stainless
Steel for Chloride Environment. J. of Metals. V.37.
No.3. p.31.
N. Sridhar, J.B.C. Wu, and P.E. Manning. 1985.
Corrosion Resistant Ni-Cr-Mo Alloys. J. of Metals.
V.37. No.12.
N. Sridhar, L.H. Flasche, and J. Kolts. 1984. Effect
of Welding Parameters on Localized Corrosion of a Duplex
Stainless Steel. Materials Performance. V.21. No.12.
p.50. A.I. Asphahani and N. Sridhar. 1982. Corrosion
Fatigue of Nickel and Nickel-base Alloys. Corrosion.
V.38, No.11, p.587.
N. Sridhar, N.F. Fiore, and J.A.
Kargol. 1980. Hydrogen Induced Crack Growth in a Ni-base
Superalloy. Scripta Met. V.14. p.225.
N. Sridhar, N.F. Fiore, and J.A. Kargol. 1980. Effect of
Low Temperature Aging on Hydrogen Embrittlement of a Ni-base
Superalloy. Scripta Met. V.14. p. 1257.
J. Been, F. King,
L. Yang, F. Song, and N. Sridhar, The role
of coatings in the generation of high- and near-neutral ph
environments that promote environmentally assisted cracking,
Paper 05167, Corrosion/2005, Houston, TX: NACE International
N. Sridhar, B. Thacker, C. Waldhart, A. Khale, and L.
Norris, Prioritization of Detailed Examination Sites in Dry
Gas Internal Corrosion Direct Assessment Using a
Probabilistic Method, Paper 05182, Corrosion/2005, Houston,
TX: NACE International C.S. Brossia, N. Sridhar, and A. Anderko, 2004, Predicting
the long-term localized corrosion of alloys in complex
environments, Eurocorr 2004, Paper 172, September 12-16,
2004, Nice, France. A. Khale,
B.H. Thacker, N. Sridhar, and C. Waldhart, A
Probabilistic model for Internal Corrosion of Gas Pipelines,
IPC04-0483, International Pipeline Conference, October 4-8,
2004, Calgary, Canada. D. Burwell,
N. Sridhar, O. Moghissi, and L. Perry, 2004,
Internal Corrosion Direct Assessment of Dry Gas Pipelines –
Validation, Corrosion/2004, Paper 04195, NACE International,
Houston, TX.
F. Song, N. Sridhar, J. Been, and F. King, 2004, Predicting
Near-neutral pH SCC Conditions under Disbonded Coatings on
Pipelines, IPC04-0196, International Pipeline Conference,
October 4-8, 2004, Calgary, Canada. M.H. Dorsey, L.T. Yang, and N. Sridhar, 2004, Cooling water
Monitoring using Coupled Multielectrode Array Sensor and
Other On-line Monitoring Tools, Corrosion/2004, Paper 04077,
NACE International, Houston, TX. A. Anderko, N. Sridhar, D.S. Dunn, and C.S. Brossia, A
Computational Approach to Predicting Localized Corrosion in
Multicomponent Aqueous Solutions, Corrosion/2004, Paper
04061, NACE International, Houston, TX.
N. Sridhar, 2004, Modeling the conditions under Disbonded
Coating Crevices – A Review, in Proceedings of the
Corrosion/2004, Research Topical Symposium, Corrosion
Modeling for Assessing the Condition of Oil and Gas
Pipelines, F. King and J.A. Beavers, (ed.), NACE
International, Houston, TX.
L.T. Yang, N. Sridhar, D.S. Dunn, and C.S. Brossia, 2004,
Laboratory Comparison Of Coupled Multielectrode Array
Sensors With Electrochemical Noise Sensors For Real-Time
Corrosion Monitoring, Corrosion/2004, Paper 04429, NACE
International, Houston, TX.
L.T. Yang, N. Sridhar, S.L. Grise, M.H. Dorsey, and B.J.
Saldanha, 2004, Real-Time Corrosion Monitoring In A Process
Stream Of A Chemical Plant Using Coupled Multielectrode
Array Sensors, Corrosion/2004, Paper 04440, NACE
International, Houston, TX. A. Anderko, N. Sridhar, C.S. Brossia, D.S. Dunn, L.T. Yang, B.J. Saldanha, S.L. Grise, and M.H. Dorsey, 2003, An
electrochemical approach to predicting and monitoring
localized corrosion in chemical process streams,
Corrosion/2003, Paper 03375, NACE International. A. Anderko, N. Sridhar, C.S. Brossia, D.S. Dunn, L.T. Yang, B.J. Saldanha,
S.L. Grise, M.H. Dorsey. An Electrochemical Approach to Predicting and
Monitoring Localized Corrosion in Chemical Process Streams.
Corrosion/2003, paper no. 03375 (2003).
D.S. Dunn, O. Pensado, C.S. Brossia, G.A. Cragnolino, N.
Sridhar, and T.M. Ahn, Modeling corrosion of alloy 22 as a
high level radioactive waste container material, in
Prediction of Long Term Corosion Behavior in Nuclear Waste
Systems, D. Feron and D.D. Macdonald (ed.), Proceedings of
an International workshop, Cadarache, France, European
Federation of Corrosion Publication No. 36, Maney
Publishing, London, U.K., 2003.
N. Sridhar, C.S. Brossia, D.S. Dunn, and A. Anderko. Predicting Localized
Corrosion in Seawater Cooling Systems. Corrosion/2002, paper no. 02204 (2002).
N. Sridhar, C.S. Brossia, D.S. Dunn, J.P. Buckingham, and A. Anderko, 2002, Predicting localized corrosion in seawater
cooling systems, Corrosion/2002, Paper 02204, NACE
International. G.A. Cragnolino,
O.Pensado, D.S. Dunn, C.S. Brossia, N.
Sridhar, 2002, Lifetime prediction of high-level radioactive
waste containers affected by corrosion, 15th International
Corrosion Congress, Grenada, Spain, CD-ROM published by
National Center for Metallurgical Research, Spanish Council
for Scientific Research, Madrid, Spain.
Y.-M. Pan, C.S. Brossia, G.A. Cragnolino, D.S. Dunn, V.
Jain, and N. Sridhar, 2002, Evolution of solution chemistry
through interactions with waste package internal structural
components, Materials Research Society Symposium
Proceedings, V. 713, B.P. McGrail and G.A. Cragnolino
(eds.), pp. 121-127. C.S. Brossia, G.A. Cragnolino, D.S. Dunn, O. Pensado, N. Sridhar, L.T.
Yang, and T.M. Ahn. Life Prediction of Container Materials for High-Level
Nuclear Waste Repository. First Asian and Oceanic Congress for Radiation
Protection Conference, accepted (2002). A. Anderko and N. Sridhar, 2001. Corrosion simulation for
the process industry. Corrosion/2001, Paper No. 01348, NACE
International.
N. Sridhar, D.S. Dunn, C.S. Brossia, and G.A. Cragnolino. Stabilization
and Repassivation of Localized Corrosion. NACE Topical Research Symposium on
Localized Corrosion (2001). G.A. Cragnolino, D.S. Dunn, Y.-M. Pan, and N. Sridhar, 2001.
The critical potential for the stress corrosion cracking of
Fe-Ni-Cr Alloys and its mechanistic implications, Chemistry
and Electrochemistry of Corrosion and Stress Corrosion
Cracking: A Symposium Honoring the Contributions of R.W.
Staehle. R.H. Jones (ed.), TMS Annual Meeting, New Orleans.
83-104. N. Sridhar,
D.S. Dunn, C.S. Brossia, and O. Moghissi,
Corrosion monitoring techniques for thermally driven wet and
dry conditions, Corrosion/2000, Paper No. 283, NACE
International.
D.S. Dunn, G.A. Cragnolino, and N. Sridhar, 2000.
Passive dissolution and localized corrosion of alloy 22
high-level waste container weldments, Scientific Basis
for Nuclear Waste Management XXIII. Materials Research
Society. N. Sridhar,
D.S. Dunn, and A. Anderko, 2000. Prediction of
conditions leading to stress corrosion cracking of gas
transmission lines, in Environmentally Assisted Cracking,
R.D. Kane (ed), ASTM STP 1401. West Conshohocken, PA:
American Society for Testing and Standards. 241-258.
N. Sridhar, D.S. Dunn, C.S. Brossia, and O.C. Moghissi. Corrosion
Monitoring Techniques for Thermally Driven Wet and Dry Systems. Corrosion/2000
paper no. 00283 (2000). T.M. Ahn, G.A. Cragnolino,
K.S. Chan, and N. Sridhar,
1999, Scientific bases for cladding credit as a barrier to
radionuclide release at the proposed Yucca Mountain
repository, Scientific Basis for Nuclear Waste Management
XXII. D.J. Wronkiewicz and J.H. Lee (ed.). Materials
Research Society. 525-534.
D.S. Dunn, G.A. Cragnolino, and N. Sridhar, 1999,
Methodologies for predicting the performance of Ni-Cr-Mo
alloys proposed for high-level waste containers, Scientific Basis for Nuclear Waste Management XXII. D.J.
Wronkiewicz and J.H. Lee (ed.). Materials Research Society.
879-886. C.S. Brossia, D.S. Dunn, and N. Sridhar. The Role of Metal Salt Film
Formation on Localized Corrosion Stabilization. Critical Factors in Localized
Corrosion - III, Electrochemical Society Proceedings Volume 98-17, pp.
485-499 (1998). C.S. Brossia, D.S. Dunn, and N. Sridhar, 1998. The
role of metal salt film formation on localized corrosion
stabilization, Critical Factors in Localized Corrosion III,
R.G. Kelly (ed.), Pennington, NJ: The Electrochemical
Society. D.S. Dunn, G.A. Cragnolino, and N. Sridhar, 1998.
Effect of galvanic coupling between overpack materials for
high-level nuclear waste containers, Corrosion/98,
Paper No. 148, NACE International.
N. Sridhar, P.C. Lichtner, and D.S. Dunn, 1998.
Evolution of environment under disbonded coating on
cathodically protected pipeline - preliminary modeling and
experimental studies, Corrosion/98, Paper 680, NACE
International. K.A. Gruss, G.A. Cragnolino, D.S. Dunn, and N. Sridhar,
1998. Repassivation potential for localized corrosion of
alloys 625 and C22 in simulated repository environments, Corrosion/98, Paper No. 149, NACE International. G.A. Cragnolino, D.S. Dunn, P.Angell, Y.-M. Pan, and N.
Sridhar, Factors influencing the performance of carbon
steel overpacks in the proposed high-level nuclear waste
repository, Corrosion/98, Paper No. 147, NACE
International. G. Cragnolino, D. Dunn, and N. Sridhar. 1995.
Environmental Factors in the Stress Corrosion Cracking of
Type 316L Stainless Steel and Alloy 825 in Chloride
Solutions. Corrosion/95. NACE.
N. Sridhar, D.S. Dunn, and G. A. Cragnolino.. 1994.
The Use of Repassivation Potential in Predicting the
Performance of High-Level Nuclear Waste Container Materials.
Scientific Basis for Nuclear Waste Management XVIII.
R. Ewing (ed.). Materials Research Society.
N. Sridhar and G.A. Cragnolino. 1993. Repassivation
Potentials for Long-Term Life Prediction of Localized
Corrosion. Scientific Basis for Nuclear Waste Management
XVI. C.Interrante and R.T.Pabalan (eds.). Materials
Research Society.
D.S. Dunn, N. Sridhar, and G. Cragnolino. 1993. The
Effect of Surface conditions on the Localized Corrosion of a
Candidate High-Level Waste container Material. 12th
International Corrosion Congress. V. 5B. Houston, TX:
NACE. pp 4021-4030.
N. Sridhar, G.A. Cragnolino, and W. Machowski. 1991.
Environmental Effects on Localized corrosion of a High-Level
Nuclear Waste Container Material. Scientific Basis for
Nuclear Waste Management XIV. T. Abrajano and L.H.
Johnson (eds.). Materials Research Society.
N. Sridhar, G.A.Cragnolino, H.Pennick, and T.Y.Torng.
1991. Application of a Transient Crevice Corrosion Model to
the Prediction of Performance of a High-Level Nuclear Waste
Container. Life Prediction of Corrodible Structures.
R.N.Parkins (ed.). NACE.
N. Sridhar, 1990. Effect of Alloying elements on the
Localized corrosion of Nickel and Nickel Alloys. Advances
in Localized Corrosion. H.Isaacs et al. (eds.). NACE. S.M. Corey, N. Sridhar, and I.J. Storey. 1990.
Prediction of corrosion in Acid Mixtures. Corrosion
Prevention in the Process Industries. R.N.Parkins (ed.).
NACE. p. 11.
N. Sridhar. 1990. Effect of Velocity on Corrosion in
H2SO4 + HF Mixtures. Paper No.19. Corrosion/90. NACE.
N. Sridhar and S.M. Corey. 1989. The Effect of
elemental sulfur on Stress corrosion Cracking of Ni-base
Alloys. Paper No.12. Corrosion/89. NACE.
N. Sridhar. 1985. Mechanisms of Corrosion in
Concentrated Sulfuric Acid. Proceedings of a Conference
on Sulfur. British Sulfur Corp. London. J. Kolts and N. Sridhar. 1984. Temperature Effects on
the Pitting Resistance of Ni-base Alloys and Stainless
Steels. Corrosion of Nickel-Base Alloys.
R.C.Scarberry (ed.). ASM International. p.199.
N. Sridhar, L.H. Flasche, and J.Kolts. 1984. Effect of
Welding Parameters on Mechanical Properties and Corrosion of
Duplex Stainless Steel. New Developments in Duplex
Stainless Steel Technology. R. A. Lula (ed.). ASM
International. P.E. Manning,
N. Sridhar, and A.I. Asphahani. 1983.
New Developments in Ni-base Alloys. Paper No.21. Corrosion/83.
NACE. Houston.
N. Sridhar, J. Kolts, and S.K. Srivastava. 1983.
Physical Metallurgy, Properties, and Applications of
Ferralium alloy 255. Duplex Stainless Steel. R. A.
Lula (ed.). ASM International. A.I. Asphahani, N. Sridhar, S.M.Corey. 1982. Effect
of Hydrogen on the Corrosion Fatigue of Nickel. Proceedings of Third International Congress on Hydrogen in
Materials. Paris. P. Azou (ed.).
N. Sridhar, M.R. Louthan, and J.L.
Lytton. 1977. Stress Corrosion Cracking of HERF Steels. Microstructural Science. V.5, p. 497.
N. Sridhar, M.R. Louthan, and R.P. McNitt. 1977. Test
Technique, Stress State, and Hydrogen Embrittlement. Proceedings of a Conference on Environmental Degradation of
Engineering Materials. p. 745. Virginia Polytechnic
Institute and State University. Blacksburg. VA.
L.T. Yang and N. Sridhar, 2003, On-line monitoring of localized
corrosion, to be published in ASM Corrosion Handbook
N. Sridhar, D.S. Dunn, G.A. Cragnolino, J.R. Kearns, 2003, Crevice
corrosion, Chapter 19, to be published in Corrosion Tests and Standards,
Application and Interpretation, American Society for Testing and Materials. G.A. Cragnolino and N. Sridhar (editors) 1993. Application of
Accelerated Corrosion Tests to Service life Prediction of Materials. ASTM
STP 1194. ASTM. N. Sridhar. and G.A.Cragnolino. 1992. Stress Corrosion Cracking of
Nickel-Base Alloys. Stress Corrosion Cracking. R.H.Jones (ed.). ASM
International. p.131. N. Sridhar. and F.G. Hodge. 1988. Nickel and High Nickel Alloys.
Corrosion and Corrosion Protection Handbook. Second Edition. P. Schweitzer
(ed.). Marcel Dekker. N. Sridhar. and J. Kolts. 1988. Prediction of Galvanic corrosion in
Oxidizing Environments. Galvanic Corrosion. ASTM STP 978. H.P.Hack (ed.).
ASTM. N. Sridhar. 1987. Behavior of Nickel Base Alloys in
Corrosive Environments. Corrosion. Metals Handbook. Vol.13. ASM
International.
Top
Frank Song
F.M. Song, N.
Sridhar, Modeling Pipeline Crevice Corrosion under a Disbonded Coating
with or without Cathodic Protection under Transient and Steady-State
Conditions, Corrosion Science, submitted.
F.M.
Song and N. Sridhar, A Simple Method to Estimate Corrosion
Rates in Coating-Disbonded Regions on Pipelines, Materials Performance,
submitted. F.M. Song
and N. Sridhar, A Two-Dimensional Model for Steel Corrosion under a Disbonded Coating due to Oxygen with or without Cathodic Protection-Part
1: Full Numerical Solution, Corrosion, 62(8) (2006) 676-686.
F.M. Song and N. Sridhar, A Two-Dimensional Model for Steel
Corrosion under a Disbonded Coating due to Oxygen with or without
Cathodic Protection-Part 2: Model Simplification for Practical
Application, Corrosion 62(10) (2006) 873-882.
F.M. Song, K.S. Raja and D.A. Jones, Modeling Anodic Current
Transient during Potential-controlled Slower Electrode Straining,
Corrosion Science, 48(2) (2006) 285-307.
F.M. Song, D.W. Kirk, D.E. Cormack and D. Wong, Barrier
Properties of Two Pipeline Coatings. Materials Performance, 44 (4)
(2005) 26-29. F.M. Song,
S. Brossia, D. Dunn and N. Sridhar, A New Permanent Reference Electrode
for Field Use with Cathodic Protection in Protection of Underground
Pipelines and Storage Tanks, Corrosion Engineering Science and
Technology, 40(3) (2005) 262-269.
F.M. Song, D.A. Jones and D.W. Kirk, Corrosion and Current Flow
within a Pipeline Disc Crevice, Corrosion, 60(2) (2005) 145-154.
F.M. Song, D.W.
Kirk, J.W. Graydon and D.E. Cormack. CO2 Corrosion of Bare Steel under
an Aqueous Boundary Layer with Oxygen and Cathodic Protection,
Corrosion 60(9) (2004) 845-851.
F.M. Song, D.W. Kirk, J.W. Graydon, and D.E. Cormack. CO2 Corrosion of
Bare Steel under an Aqueous Boundary Layer, Corrosion 60(8) (2004)
736-748. F.M. Song, D.W. Kirk, J.W. Graydon, and D.E. Cormack.
CO2 Corrosion of
Bare Steel under an Aqueous Boundary Layer with Oxygen and Cathodic Protection,
Corrosion 60(9) (2004) 845-851.
F.M. Song, D.W. Kirk, and D.E. Cormack. Determination of Precipitates for
CO2 Corrosion of Steel under an Aqueous Boundary Layer, Journal of Corrosion
Science and Engineering, Volume 3, Paper 24 (2004).
F.M. Song, C.G. Liu, J.S. Zhou, and G.J. Yang. Thermal Hydrocracking of
Chinese Gudao Vacuum Residue, Petroleum Science and Technology, 22 (5&6) (2004)
689-708. F.M. Song, D.W. Kirk, D.E. Cormack, and D. Wong. Corrosion under
Disbonded Coatings with Cathodic Protection, Materials Performance, 42(9)
(2003) 24-26. F.M. Song, D.W. Kirk, J.W. Graydon, and D.E. Cormack. Steel Corrosion
under a Disbonded Coating with a Holiday, Part 2: Corrosion Behavior, Corrosion 59(1) (2003) 42-49.
F.M. Song, D.W. Kirk, J.W. Graydon, and D.E. Cormack. Steel Corrosion
under a Disbonded Coating with a Holiday, Part 1: The Model and Validation, Corrosion 58(12) (2002) 1015-1024.
F.M. Song, D.W. Kirk, J.W. Graydon, and D.E. Cormack, Effect of Ferrous
Ion Oxidation on Corrosion of Active Iron under an Aerated Solution Layer, Corrosion 58(2) (2002) 145-155.
F.M. Song, D.W. Kirk, J.W. Graydon, and D.E. Cormack. CO2 Corrosion of
Bare Steel under an Aqueous Boundary Layer with Oxygen, Journal of The
Electrochemical Society, 149(11) (2002) B479-B486.
F.M. Song, G.J. Yang, S.K. Han, Z.Q. Huang, and J.L. Qian, Study on
Coking Kinetics of Chinese Gudao Vacuum Residue, Fuel Science and Technology
International 13 (7) (1995): 819-835. S.K. Han, F.M.
Song, and J.L. Qian. Kinetic Study on Thermal-Conversion
of Nanjing Residue at High Temperatures, ACTA PETROLEI SINICA (PETROLEUM
PROCESSING SECTION) 11 (3) (1995): 7-12 (in Chinese). S.K. Han, F.M.
Song, G.J. Yang, and Z.Q. Huang. Thermal-Conversion
Kinetic Models of Gudao Vacuum and Nanjing Coking Residua, Journal of The
University of Petroleum, China 17 (6) (1993): 87-91 (in Chinese).
N. Sridhar, L.T. Yang and F.M.
Song, Application of Multi-electrode
Array Sensor to Study Dewpoint Corrosion in High Pressure Natural Gas
Pipeline Environments. March 12-16, 2006 (Houston, TX: NACE, 2006)
Paper: 06673.
F.M. Song,
D.W. Kirk and D.E. Cormack, Modeling CO2 Corrosion in Oil
and Gas Transmission Systems. April 3-7, 2005 (Houston, TX: NACE, 2005)
Paper: 05180.
F.M. Song, S. Brossia, D.
Dunn, and N. Sridhar. A New Permanent Reference Electrode for Field Use with Cathodic Protection in Protection of Underground Pipelines and Storage Tanks.
April 3-7, 2005 (Houston, TX: NACE, 2005) Paper: 05040
J. Been, F. King, L. Yang, F.M.
Song and N. Sridhar, The Role of
Coatings in the Generation of High and Near Neutral pH Environments that
Promote Environmentally Assisted Cracking. April 3-7, 2005 (Houston,
TX: NACE, 2005) Paper: 05167.
F.M. Song, D.A. Jones, and
D.W. Kirk. Modeling Pipeline Corrosion within a Disc-Shaped Crevice for Various
Cathodic Protection Levels at the Holiday. April 3-7, 2005 (Houston, TX: NACE,
2005) Paper: 05137
F.M. Song, D.W. Kirk, D.E.
Cormack, and D. Wong. Barrier Properties of Two Pipeline Coatings. April 3-7,
2005 (Houston, TX: NACE, 2005) Paper: 05025
J. Been, F. King, L. Yang,
F.M. Song, and N. Sridhar. The Role of
Coatings in the Generation of High and Near Neutral pH Environments that Promote
Environmentally Assisted Cracking. April 3-7, 2005 (Houston, TX: NACE, 2005)
Paper: 05167.
S. Brossia, N. Sridhar, F.M. Song, B. Thacker, G. Tormoen, Life
Prediction of Natural Gas Pipeline Systems. April 3-7, 2005 (Houston,
TX: NACE, 2005).
F.M. Song and N. Sridhar.
Predicting Pipeline SCC Conditions through Simulation of Under-Disbondment
Chemistry and Potential, International Pipeline Conference, Calgary, Alberta,
Canada, Oct. 4-8, 2004. Paper 03177.
F.M. Song, D.W. Kirk, J.W.
Graydon, and D.E. Cormack. Prediction for CO2 Corrosion of Active Steel under a
Precipitate. March 28-April 1, 2004 (New Orleans, LA: NACE, 2004) Paper: 04382.
F.M. Song and N. Sridhar.
Application of a Reactive Transport Model to Corrosion in Occluded Environments,
205th Electrochemical Society Meeting, San Antonio, TX, May 9-13, 2004.
F.M. Song. Modeling the
Quantitative Effect of Ferrous Ion Oxidation on Steel/Iron Corrosion Rate, at
NACE/2004, March 28-Apri. 1, New Orleans, LA, USA.
K.S. Raja, F.M. Song,
D.A. Jones, S. Namjoshi and L.G. McMillion, Correlation of Current
Transients to Film Rupture during Tensile Loading of SS304 and Alloy 22
in 4M NaCl Solution at 60 °C. March 16-20, 2003 (San Diego, CA: NACE,
2003) Paper 03540.
F.M. Song, K.S. Raja, S.
Namjoshi, L.G. McMillion, and D.A. Jones. Modeling Anodic Current Transients
during Variable Strain-rate Testing. 11th ANS Conference, August 11-14, 2003,
Stevenson, WA, USA.
F.M. Song, D.W. Kirk, J.W.
Graydon, and D.E. Cormack. A New Pipeline Crevice Corrosion Model with Oxygen
and CP, at NACE/2003, March 16-20, San Diego, CA, USA. Paper: 03177.
F.M. Song,
Modeling Pipeline Corrosion under a Disbonded Coating with a Holiday and
Cathodic Protection, SwRI, Mechanical and Materials Eng. Division,
September 4, 2003.
F.M. Song,
Computer Modeling of Corrosion Systems, Departmental Seminar Series,
Metallurgical and Materials Engineering, University of Nevada Reno,
September 13, 2002, Reno, NV, USA.
F.M. Song,
Atmospheric Corrosion of Alloy-22 and Carbon Steel for Use at Yucca
Mountain, at YMP (Las Vegas, USA), July 14, 2002, LV, NV, USA.
F.M. Song, K.S.
Raja, S. Namjoshi, L.G. McMillion and D.A. Jones, Review and Comparison
of SCC Models Utilized for Long-Term Predictions at Yucca Mountain.
October 6-10, 2002 (Columbus, OH: TMS Fall Meeting, 2002).
K.S. Raja, F.M. Song,
S. Namjoshi and D.A. Jones, Strain Hardening Behavior of Stainless
Alloys under the Influence of Anodic Dissolution. October 6-10,
2002 (Columbus, OH: TMS Fall Meeting, 2002).
F.M. Song, D.W.
Kirk and D.E. Cormack, Corrosion of Coated Pipelines with Cathodic
Protection, at ShawCor Ltd., December 14, 2001, Toronto, Ontario,
Canada.
F.M. Song, New Pipeline Corrosion Model
Developed, interviewed on September 20, 2001 by Matthew Veazey, Staff Writer, Materials Performance, December (2001) p.28.
F.M. Song, D.W. Kirk, and
D.E. Cormack. Cathodic Protection Distribution under a Blistered Coating,
Proceedings of NACE International Conference, Northern Region in Toronto
(November 6-7, 2000).
F.M. Song, D.W. Kirk, and
D.E. Cormack. Modeling Pipe Corrosion under a Blistered Coating, Proceedings of
197th ECS meeting in Toronto (May 14-18, 2000) (poster).
F.M. Song, D.W. Kirk, and
D.E. Cormack. Modeling Steel Corrosion in Aerated Carbonic Acid, Proceedings of
197th ECS meeting in Toronto (May 14-18, 2000) (poster).
F.M. Song, D.W. Kirk, and
D.E. Cormack. Modeling CO2 Corrosion of Pipelines under an Aerated Solution with Cathodic Protection, NRC On-line Conference, August 7, 2000 at <http://www.nrcan.gc.ca/picon>
(poster).
F.M. Song, D.W. Kirk, and
D.E. Cormack. Corrosion Mechanisms of Coated Natural Gas Pipelines with Cathodic
Protection, July 30, 2000, at <http://www.nrcan.gc.ca/picon>.
F.M. Song, D.W.
Kirk and D.E. Cormack, Model of Pipe Corrosion under a Solution Layer.
October 24-27, 1999 (Ottawa, Ontario, Canada: NACE North Regional
Conference, 1999) Paper: 8A.6.
J.Y. Sun, S.Y Qi, A.G. Chen, and F.M. Song.
China
Petroleum Newsletter (English), a biweekly newsletter for international
petroleum companies, 1993-1994; 1994-1995; 1995-1996; 1996-1997. J.Y. Sun, S.Y Qi, A.G. Chen, and F.M. Song. Chinese Petroleum Company
Directory (Chinese and English), annual book for international petroleum
companies, 1994-1995; 1995-1996.
F.M. Song and N.
Sridhar, Crevice Corrosion of Steel under a Disbonded Coating, Chapter
13, in Multiphysics Modeling with Finite Element Methods, a
textbook authored by: Will Zimmerman, World Scientific Publishing
Company Series A on Stability, Vibration and Control of Systems July,
2006 p.357-370.
F.M. Song and N.
Sridhar, A Simple Method to Estimate Corrosion Rates in Coating-Disbonded
Regions on Pipelines. March 11-15, 2007 (Houston, TX: NACE, 2007) Paper:
07155. F.M. Song
and N. Sridhar, Chemistry and Corrosion Rates under Pipeline Disbonded
Coating with or without Cathodic Protection. March 11-15, 2007 (Houston,
TX: NACE, 2007) Paper: 07118.
F.M. Song and N. Sridhar, Reassessment Interval Estimate Based on
Corrosion Rate under a Delaminated Coating with O2, with or without CP.
March 12-16, 2006 (Houston, TX: NACE, 2006) Paper: 06186.
N. Sridhar, L.T. Yang and F.M. Song, Application of
Multi-electrode Array Sensor to Study Dewpoint Corrosion in High
Pressure Natural Gas Pipeline Environments. March 12-16, 2006
(Houston, TX: NACE, 2006) Paper: 06673.
F.M. Song, S. Brossia, D. Dunn, and N. Sridhar.
A New Permanent Reference Electrode for Field Use with Cathodic Protection in
Protection of Underground Pipelines and Storage Tanks. April 3-7, 2005 (Houston,
TX: NACE, 2005) Paper: 05040 F.M.
Song, D.W. Kirk, and D.E. Cormack.
Modeling CO2 Corrosion in Oil and Gas Transmission Systems. April 3-7, 2005
(Houston, TX: NACE, 2005) Paper: 05180
F.M. Song, D.A. Jones, and D.W. Kirk. Modeling
Pipeline Corrosion within a Disc-Shaped Crevice for Various Cathodic Protection
Levels at the Holiday. April 3-7, 2005 (Houston, TX: NACE, 2005) Paper: 05137
F.M. Song, D.W. Kirk, D.E. Cormack, and D.
Wong. Barrier Properties of Two Pipeline Coatings. April 3-7, 2005 (Houston, TX:
NACE, 2005) Paper: 05025 F.M. Song, D.W. Kirk, J.W. Graydon, and D.E.
Cormack. Prediction for CO2 Corrosion of Active Steel under a Precipitate, at NACE/2004, March 28-April 1, New Orleans, LA, USA.
F.M. Song. Modeling the Quantitative Effect of
Ferrous Ion Oxidation on Steel/Iron Corrosion Rate, at NACE/2004, March 28-April
1, New Orleans, LA, USA. F.M. Song. Modeling Pipeline Corrosion under a
Disbonded Coating with a Holiday and Cathodic Protection, SwRI, Mechanical and
Materials Eng. Division, September 4, 2003.
F.M. Song, K.S. Raja, S. Namjoshi, L.G.
McMillion, and D.A. Jones. Modeling Anodic Current Transients during Variable
Strain-rate Testing, 11th ANS Conference, August 11-14, 2003, Stevenson, WA,
USA. F.M. Song, D.W. Kirk, J.W. Graydon, and D.E.
Cormack. A New Pipeline Crevice Corrosion Model with Oxygen and CP, at NACE/2003,
March 16-20, San Diego, CA, USA.
F.M. Song and D.A. Jones. Review and Comparison
of SCC Models Utilized for Long-Term Predictions at Yucca Mountain, at 2002 TMS
Fall Meeting, October 6-10, Columbus, OH, USA.
F.M. Song. Computer Modeling of Corrosion
Systems, Departmental Seminar Series, Metallurgical and Materials Engineering,
University of Nevada Reno, September 13, 2002, Reno, NV, USA.
F.M. Song. Atmospheric Corrosion of Alloy-22
and Carbon Steel for Use at Yucca Mountain, at YMP (Las Vegas, USA), July 14,
2002, LV, NV, USA. F.M. Song, D.W. Kirk, and D.E. Cormack.
Corrosion of Coated Pipelines with Cathodic Protection, at ShawCor Ltd.
(Toronto, Canada), December 14, 2001, Toronto, Ontario.
F.M. Song, D.W. Kirk, and D.E. Cormack.
Cathodic Protection Distribution under a Blistered Coating, at 2000 NACE
International Conference, November 6-7, Toronto, Ontario.
F.M. Song, D.W. Kirk, and D.E. Cormack. Model
of Pipe Corrosion under a Solution Layer, at 1999 NACE International Conference,
October 24-27, Ottawa, Ontario.
F.M. Song and N. Sridhar. Qualification Testing for Thunder Horse, SWRI
Project: 18044.01.150, Completion: September 16, 2004. C. Brossia, F.M.
Song, and N. Sridhar.
CP Shielding, for PRCI,
SwRI Project: 18-06522, Completion: June 2004.
F.M. Song, C. Brossia, and N. Sridhar.
Development and Evaluation of a New Permanent Reference Electrode, for SwRI
(IR&D), SwRI Project 18-R9463, Completion: June, 2004. N. Sridhar,
F.M. Song, and C. Brossia. Prediction of Corrosion of
Advanced Materials and Fabricated Components First Quarterly Report, Report
No. 18.10452-100, SwRI Project: 18-10452, Complete: April, 2004. N. Sridhar,
F.M. Song, and M. Nored. Guidelines/Quality Standards for
Transportation of Gas Contaminating Mixed Corrosive Constituents, for PRCI,
Contract GTI PF 00021435, PRCI ID: PR-015-03131, SwRI Project 18-06974,
Publication Date: February, 2004.
F.M. Song. Modeling Corrosion of a Bare Pipeline
Surface under a Solution Layer, at Environmental Institute, University of
Toronto, October 18, 1999, Toronto, Ontario.
Top
Lietai Yang
L. Yang, D.S. Dunn,
Y-M. Pan, and N. Sridhar,
Real-time monitoring of carbon steel corrosion in crude oil and brine mixtures
using coupled multielectrode sensors. CORROSION/2005 Paper 293 Houston, TX: NACE International. 2005. L. Yang and N. Sridhar, S.L. Grise, B.J. Saldanha, M.H. Dorsey,
Real-time corrosion monitoring in a process stream of a chemical plant using
coupled multielectrode array sensors. CORROSION/2004 Paper 440 Houston, TX: NACE International. 2004. A. Anderko,
N. Sridhar, C.S. Brossia, D.S. Dunn, L.T. Yang, B.J. Saldanha,
S.L. Grise, M.H. Dorsey. An Electrochemical Approach to Predicting and
Monitoring Localized Corrosion in Chemical Process Streams.
Corrosion/2003, paper no. 03375 (2003). C.S. Brossia, G.A. Cragnolino, D.S. Dunn, O. Pensado, N. Sridhar,
L.T.
Yang, and T.M. Ahn. Life Prediction of Container Materials for High-Level
Nuclear Waste Repository. First Asian and Oceanic Congress for Radiation
Protection Conference, accepted (2002).
Top
Darrell S.
Dunn
D.S. Dunn, Y.-M. Pan and
K.T. Chiang. Microstructure and Mechanical Properties of Alloy 22.
CNWRA 2005-03, San Antonio, TX: Center for Nuclear Waste Regulatory
Analyses (2005).
D.S. Dunn, O. Pensado,
Y.-M. Pan, R.T. Pabalan, L. Yang, X. He, K.T. Chiang, Passive
and Localized Corrosion of Alloy 22-Modeling and Experiments. CNWRA
2005-02, San Antonio, TX: Center for Nuclear Waste Regulatory Analyses
(2004).
D.S. Dunn, Y.-M.
Pan, D. Daruwalla, A. Csontos. The Effects of Fabrication Processes on
the Mechanical Properties of Waste Packages-Progress Report. CNWRA
2004-03, San Antonio, TX: Center for Nuclear Waste Regulatory Analyses
(2004).
D.S. Dunn, D. Daruwalla,
Y.M. Pan. Effect of Fabrication Processes on Materials
Stability-Characterization and Corrosion. CNWRA 2004-01, San Antonio,
TX: Center for Nuclear Waste Regulatory Analyses (2003).
O. Pensado, D.S. Dunn,
G.A. Cragnolino, and V. Jain. Passive Dissolution of Container
Materials-Modeling and Experiments. CNWRA 2003-01, San Antonio, TX:
Center for Nuclear Waste Regulatory Analyses (2002).
Y.M. Pan, C. S. Brossia,
G.A. Cragnolino, D.S. Dunn, G.D. Gute, and L. Yang. Stress
Corrosion Cracking and Hydrogen Embrittlement of Container and Drip
Shield Materials. CNWRA 2003-02, San Antonio, TX: Center for Nuclear
Waste Regulatory Analyses (2002).
A.S. Garabedian, D.S.
Dunn, A.H. Chowdhury. Analysis of Rail Car Components Exposed to a
Tunnel Fire Environment. CNWRA 2003-04 Revision 1., San Antonio, TX:
Center for Nuclear Waste Regulatory Analyses (2002).
C.S. Brossia, L.
Browning, D.S. Dunn, O.C. Moghissi, and O. Pensado, L. Yang.
Effect of Environment on the Corrosion of Waste Package and Drip Shield
Materials. CNWRA 2001-03. San Antonio, TX: Center for Nuclear Waste
Regulatory Analyses (2001).
C.S. Brossia, D.S.
Dunn, O.C. Moghissi, and N. Sridhar. Assessment of Methodologies to
Confirm Container Performance Model Predictions. CNWRA 2000-06. San
Antonio, TX: Center for Nuclear Waste Regulatory Analyses (2000).
G.A. Cragnolino, D.S.
Dunn, C.S. Brossia, V. Jain, and K. Chan. Assessment of Performance
Issues Related to Alternate EBS Materials and Design Options. CNWRA
99-003, San Antonio, TX: Center for Nuclear Waste Regulatory Analyses
(1999).
D.S. Dunn, Y-M.
Pan and G.A Cragnolino. Effects of Environmental Factors on the Aqueous
Corrosion of High-Level Radioactive Waste Containers-Experimental
Results and Models CNWRA 99-004. San Antonio, TX: Center for Nuclear
Waste Regulatory Analyses (1999).
D.S. Dunn and G.A
Cragnolino. Effect of Galvanic Coupling Between Overpack Materials of
High-Level Nuclear Waste Containers - Experimental and Modeling
Results. CNWRA 98-004, San Antonio, TX: Center for Nuclear Waste
Regulatory Analyses (1998).
S. Brossia, D. Dunn,
N. Sridhar. Effects of Environmental Factors on Container Life. CNWRA
98-008, San Antonio, TX: Center for Nuclear Waste Regulatory Analyses
(1998).
D.S. Dunn and G.A.
Cragnolino. In Situ Analysis of Corrosion Under Alternate Wet and Dry
Conditions. Final Report, SwRI Project 20-9995 (1998).
S. Mohanty, G.A.
Cragnolino, T. Ahn, D.S. Dunn, P.C. Lichtner, R.D. Manteufel, N.
Sridhar. Engineered Barrier System Performance Assessment Code: EBSPAC
version 1.1 - Technical Description and User's Manual. CNWRA 97-006 San
Antonio, TX: Center for Nuclear Waste Regulatory Analyses (1997).
D.S. Dunn and G.A
Cragnolino. An analysis of Galvanic Coupling Effects on the Performance
of High-Level Nuclear Waste Container Materials. CNWRA 97-010, San
Antonio, TX: Center for Nuclear Waste Regulatory Analyses (1997).
N. Sridhar and D.S.
Dunn. In situ Study of Salt Film Stability in Corroding Pits by
Raman Spectroscopy. Final Report, SwRI Project 20-9874 (1996).
N. Sridhar, P. Lichtner,
and D. Dunn, Evolution of Chemistry inside Disbonded Coatings on
Cathodically Protected Steel Pipeline - Modeling and Experimental
Studies. Final Report, SwRI Project 20-9932 (1996).
N. Sridhar, G. A.
Cragnolino, and D.S. Dunn. Experimental Investigations of
Failure Processes of High-Level Radioactive Waste container Materials.
Report Number CNWRA 95-010, San Antonio, TX: Center for Nuclear Waste
Regulatory Analyses (1995).
G.A. Cragnolino, P.
Angell, D.S. Dunn, and N. Sridhar. NRC High-Level Radioactive
Waste Research at CNWRA July Through December 1995 - Integrated Waste
Package Experiments. CNWRA 95-02S, San Antonio, TX: Center for Nuclear
Waste Regulatory Analyses (1995).
N. Sridhar, G. A.
Cragnolino, D.S. Dunn, and H. K. Manaktala. Review of
Degradation Modes of Alternate Container Designs and Materials. CNWRA
94-010, San Antonio, TX: Center for Nuclear Waste Regulatory Analyses
(1994).
G.A. Cragnolino, D.S.
Dunn, and N. Sridhar. NRC High-Level Radioactive Waste Research at
CNWRA January Through June 1994 - Integrated Waste Package Experiments.
CNWRA 93-01S, San Antonio, TX: Center for Nuclear Waste Regulatory
Analyses (1994).
G.A. Cragnolino, D.S.
Dunn, N. Sridhar. Environmental effects on stress corrosion
cracking of type 316L stainless steel and Alloy 825 as high-level
nuclear waste container materials. CNWRA 94-028, San Antonio, TX,
Center for Nuclear Waste Regulatory Analyses (1994).
D.S. Dunn, N.
Sridhar, and G. A. Cragnolino. NRC High-Level Radioactive Waste
Research at CNWRA July Through December 1994 - Integrated Waste Package
Experiments. CNWRA 94-02S, San Antonio, TX: Center for Nuclear Waste
Regulatory Analyses (1994).
N. Sridhar, G. A.
Cragnolino, and D.S. Dunn. Experimental Investigations of
Localized corrosion of High-Level Waste Container Materials. CNWRA
93-004, San Antonio, TX: Center for Nuclear Waste Regulatory Analyses
(1993).
N. Sridhar, G. A.
Cragnolino, and D.S. Dunn. NRC High-Level Radioactive Waste
Research at CNWRA January Through June 1993 - Integrated Waste Package
Experiments. CNWRA 93-01S, San Antonio, TX: Center for Nuclear Waste
Regulatory Analyses (1993).
N. Sridhar, G. A.
Cragnolino, and D.S. Dunn. NRC High-Level Radioactive Waste
Research at CNWRA July Through December 1993 - Integrated Waste Package
Experiments. CNWRA 93-02S, San Antonio, TX: Center for Nuclear Waste
Regulatory Analyses (1993).
D.S. Dunn, Y.-M. Pan,
L. Yang, and G.A.
Cragnolino. Localized Corrosion Susceptibility of Alloy 22 in
Chloride Solutions II-Effect of Fabrication Processes. Corrosion
Vol. 62 (1), 2006. D.S. Dunn,
L. Yang, Y.-M. Pan, and G.A. Cragnolino.
Localized Corrosion Susceptibility of Alloy 22 in Chloride Solutions
I-Mill-Annealed Condition. Corrosion Vol. 61 (11),
2005. A. Passarelli, D. Dunn, O. Pensado, T. Bloomer, T. Ahn. Risk Assessment of
Uniform and Localized Corrosion of Alloy 22. Metallurgical and Materials Transactions A Vol. 36A, pp.
1121-1127 (2005). D.S. Dunn,
Y.M. Pan, K.T. Chiang, L. Yang, G.A. Cragnolino,
and X. He. Localized Corrosion Resistance and Mechanical Properties
of Alloy 22 Waste Package Outer Containers. JOM Vol. 57(1),
pp. 49-55 (2005). A. Csontos, T. Ahn, A. Passarelli, Y. Pan, D. Dunn, and L.
Yang. The Evaluation of Corrosion Processes for Engineered Barrier
Systems. JOM Vol. 57(1), pp. 36-42 (2005). A. Andreko, N. Sridhar, and D.S. Dunn. A General Model for
the Repassivation Potential as a Function of Multiple Aqueous
Solution Species. Corrosion Science Vol. 46, pp. 1583-1612
(2004). G.A. Cragnolino, D.S. Dunn, and C.S. Brossia, Y-M. Pan, O. Pensado, and
L. Yang. Corrosion Behavior of Waste Package and Drip
Shield Materials. Nuclear Technology Vol. 148, pp. 166-173
(2004). L. Yang, N. Sridhar,
O. Pensado and
D. Dunn. An In Situ Galvanically Coupled Multielectode Array
Sensor for Localized Corrosion. Corrosion Vol. 58, pp.1004-1014 (2002). N. Sridhar,
D.S. Dunn, A.M. Anderko, M.M. Lencka, and H.H.
Schutt. Effects of Water and Gas Compositions on the Internal
Corrosion of Gas Pipelines-Modeling and Experimental Studies.
Corrosion Vol. 57(3), pp. 221-235 (2001).
Y.M. Pan,
D.S. Dunn, G.A. Cragnolino, and N. Sridhar. Grain
Boundary Chemistry and Intergranular Corrosion in Alloy 825.
Metallurgical and Materials Transactions A Vol. 31A, pp.
1163-1173 (2000). D.S. Dunn, G.A. Cragnolino, N. Sridhar.
An Electrochemical Approach to Predicting Long-Term Localized Corrosion
of Corrosion Resistant Container Materials. Corrosion Vol. 56(1), pp.
90-104 (2000). D.S. Dunn, M.B. Bogart, C.S. Brossia, and G.A. Cragnolino.
Corrosion of Iron Under Alternating Wet and Dry Conditions.
Corrosion Vol. 56(5), pp. 470-481 (2000).
D.S. Dunn, G.A. Cragnolino, and N. Sridhar. Effect of
Galvanic Coupling Between Overpack Materials of High-Level Nuclear
Waste Containers. Corrosion Vol. 56(6), pp. 598-610 (2000). G.A. Cragnolino,
S. Mohanty,
D.S. Dunn, N. Sridhar, and T.M.
Ahn. An Approach to the Assessment of High-Level Radioactive Waste
Containment-I: Waste Package Degradation. Nuclear Engineering
and Design Vol. 201, pp. 289-306 (2000). N. Sridhar and
D.S. Dunn. In Situ Study of Salt Film
Stability in Simulated Pits of Nickel by Raman and Electrochemical
Impedance Spectroscopies. Journal of the Electrochemical Society
Vol. 144(12), pp. 4243-4253 (1997).
D.S. Dunn, N. Sridhar, and G.A. Cragnolino. Long-Term
Prediction of Localized Corrosion of Alloy 825 in High-Level Nuclear
Waste Repository Environments. Corrosion Vol. 52(2), pp. 114-124
(1996). G. Cragnolino, D.S. Dunn, and N. Sridhar. Environmental Factors in the Stress
Corrosion Cracking of Type 316L Stainless Steel and Alloy 825 in
Chloride Solutions. Corrosion Vol.
52(3), pp. 194-203 (1996).
Y.-M. Pan, N. Sridhar,
D.S. Dunn, and G.A. Cragnolino.
Effect of Specimen Preparation Procedures on Chromium Depletion and
Precipitation Chemistry in Alloy 825 by Analytical Electron Microscopy. Journal of Material Science Letters Vol 15, pp.
522-524 (1996). D.S. Dunn, N. Sridhar, and G.A. Cragnolino.
Effects of Surface Chromium Depletion on Localized Corrosion of Alloy
825 as a High-Level Nuclear Waste Container Material. Corrosion Vol.
51(8), pp. 618-624 (1995). N. Sridhar and
D.S. Dunn. Effect of Applied Potential on Changes in Solution
Chemistry Inside Crevices on Type 304L Stainless Steel and Alloy 825. Corrosion Vol. 50(11), pp. 857-872
(1994). D.S. Dunn, S. Raghavan and R.G. Volz.
Ciprofloxacin Attachment to Porous-Coated Titanium Surfaces. Journal of
Applied Biomaterials Vol. 5, pp. 325-331 (1994).
D.S. Dunn, S. Raghavan and R.G. Volz, Gentamicin Sulfate
Attachment and Release from Anodized Ti-6Al-4V Orthopedic Materials. Journal of Biomedical Materials Research, Vol.
27, pp. 895-900 (1993).
D.S. Dunn, S. Raghavan and R.G. Volz. Anodized Layers on Titanium
and Titanium Alloy Orthopedic Materials for Antimicrobial Activity
Applications. Materials and Manufacturing Processes
Vol 7(1), pp. 123-137 (1992).
D.S. Dunn, and S. Raghavan. Formation and Characterization of
Anodized Layers on CP Ti and Ti-6Al-4V Biomaterials. Surface
Coatings and Technology Vol 50, pp. 223-232 (1992).
O. Pensado, R. Pabalan, D. Dunn, and
K.-T. Chiang. Use of Alloy-22 as a
Long-Term Radioactive Waste Containment Material. Passivation of
Metals and Semiconductors, and Properties of Thin Oxide Layers -A
Selection of Papers from the 9th International Symposium, Paris,
France, 27 June - 1 July, 2005. Phillipe Marcus and Vincent Maurice,
eds, The Netherlands: Elsevier, pp. 53-57, 2006.
D.S. Dunn, O. Pensodo, Y.-M. Pan, L.T. Yang, and
X. He.
Modeling Corrosion Processes for Alloy 22 Waste Packages. Scientific
Basis for Nuclear Waste Management XXIX, P.Van Iseghem ed, Warrendale,
PA: Materials Research Society Symposium Proceedings Vol. 932, pp.
853-860 (2006). X. He and
D.S. Dunn. Crevice Corrosion Penetration Rates of Alloy 22 in
Chloride-Containing Waters. Proceedings of the CORROSION 2006
Conference Paper No. 618, Houston, TX: NACE International (2006). P.K. Shukla, D.S. Dunn, K.T. Chiang, and O. Pensado. Stress
Corrosion Model for Alloy 22 in the Potential Yucca Mountain
Repository. Proceedings of the CORROSION 2006 Conference Paper No. 502,
Houston, TX: NACE International (2006).
K.T. Chiang,
D.S. Dunn, and G.A. Cragnolino. The Combined Effect
of Simulated Bicarbonate and Chloride Ions on the Stress Corrosion
Cracking Susceptibility of Alloy 22. Proceedings of the CORROSION 2006
Conference Paper No. 506, Houston, TX: NACE International (2006). A. Csontos,
Y.-M. Pan,
D.S. Dunn, L. Yang, and G.A. Cragnolino. Pb-Assisted
Stress Corrosion Cracking Susceptibility of Alloy 22. Proceedings of
the CORROSION 2006 Conference Paper No. 508, Houston, TX: NACE
International (2006). D.S. Dunn,
Y.-M. Pan, K.T. Chiang, and G.A. Cragnolino. Surface
Analysis of Alloy 22 Under Conditions that Promotes Stress Corrosion
Cracking. Proceedings of the CORROSION 2006 Conference Paper No. 509,
Houston, TX: NACE International (2006). A. Anderko, N. Sridhar, D.S. Dunn and C.S. Brossia. A
Computational Approach to Predicting the Occurrence of Localized
Corrosion in Multicomponent Aqueous Solutions. Proceedings of the
CORROSION 2004 Conference Paper No. 061, Houston, TX: NACE International
(2004). L. Yang, N.
Sridhar, D.S. Dunn and C.S. Brossia. Laboratory Comparison of
Coupled Multielectrode Array Sensors with Electrochemical Noise Sensors
for Real-Time Corrosion Monitoring. Proceedings of the CORROSION 2004
Conference Paper No. 429, Houston, TX: NACE International (2004).
D.S. Dunn, G.A. Cragnolino, Y.M. Pan and L.T. Yang. Effect of
Fabrication Processes on Alloy 22 Corrosion Resistance. Proceedings of
the CORROSION 2004 Conference Paper No. 498, Houston, TX: NACE
International (2004). D.S. Dunn,
L. Yang, C. Wu, and G.A. Cragnolino. Effect of
Inhibiting Oxyanions on the Localized Corrosion Susceptibility of Waste
Package Container Materials. Scientific Basis for Nuclear Waste
Management XXVIII, J.M. Hanchar, S. Stroes-Gascoyne, and L. Browning eds,
Warrendale, PA: Materials Research Society Symposium Proceedings Vol.
824, pp. 33-38 (2004). A.A.
Csontos, Y-M. Pan, D.S. Dunn, and G.A. Cragnolino. The effect of
fabrication processes on the governing mechanical failure criteria for
Alloy 22, Ti-Grade2/7, and Ti-Grade 5/24 alloys. Scientific Basis for
Nuclear Waste Management XXVIII, J.M. Hanchar, S. Stroes-Gascoyne, and
L. Browning eds, Warrendale, PA: Materials Research Society Symposium
Proceedings Vol. 824, pp. 27-32 (2004). A.A. Csontos, Y-M. Pan,
D.S. Dunn, L. Yang, and G.A. Cragnolino. The effect of environmental chemistry on the Pb assisted stress
corrosion cracking susceptibility of Mill-Annealed Alloy 22 and GTAW
weldments. Scientific Basis for Nuclear Waste Management XXVIII, J.M.
Hanchar, S. Stroes-Gascoyne, and L. Browning eds, Warrendale, PA:
Materials Research Society Symposium Proceedings Vol. 824, pp. 39-44
(2004). A. Anderko, N.
Sridhar, C.S. Brossia, D.S. Dunn, L.T. Yang, B.J. Saldanha, S.L.
Grise, and M.H. Dorsey. An Electrochemical Approach to Predicting and
Monitoring Localized Corrosion in Chemical Process Streams.
Corrosion/2003, paper no. 03375 (2003).
O. Pensado,
D.S. Dunn, G. Cragnolino, and V. Jain, Long-Term
Extrapolation of Passive Behavior of Alloy 22. Scientific Basis for
Nuclear Waste Management XXVI. R.J. Finch and D.B. Bullen eds,
Warrendale, PA: Materials Research Society Symposium Proceedings Vol.
757, pp. 723-728 (2003).
Y.-M. Pan,
D.S. Dunn, L. Yang, and G. Cragnolino. Corrosion and
Stress Corrosion Cracking of Alloy 22 in Lead-Containing Solutions.
Scientific Basis for Nuclear Waste Management XXVI. R.J. Finch and D.B.
Bullen eds, Warrendale, PA: Materials Research Society Symposium
Proceedings Vol. 757, pp. 743-980 (2003).
L. Yang, R. Pabalan, L. Browning, and
D.S. Dunn. Corrosion
Behavior of Carbon Steel Materials under Salt Deposits and Simulated Dry
Repository Environments. in Scientific Basis for Nuclear Waste
Management XXVI, R. J. Finch and D. B. Bullen, eds, Warrendale, PA:
Materials Research Society Symposium Proceedings Vol. 757, pp.791-797
(2003). Y.-M. Pan, D.S.
Dunn and G.A Cragnolino. Phase Instability Affecting the Corrosion
Performance of Alloy 22 for High-Level Nuclear Waste Containers. The
Mike Meshii Symposium on Electron Microscopy: Its Role in Materials
Research. J.R. Weertmen et al. eds. Warrendale, PA: The Minerals, Metals
& Materials Society, pp. 201-208 (2003). V. Jain,
D. Dunn, N. Sridhar, and L. Yang. Effect of Measurement
Methods and Solution Chemistry on the Evaluation of the Localized
Corrosion of Candidate High Level Waste Container Materials.
Proceedings of the CORROSION 2003 Conference Paper No. 690, Houston, TX: NACE International (2003). G.A. Cragnolino, D.S. Dunn, and Y.-M. Pan. Effects of Potential
and Environment on the Stress Corrosion Cracking Susceptibility of
Nickel-Chromium-Molybdenum Alloys. Proceedings of the CORROSION 2003
Conference Paper No. 541, Houston, TX: NACE International (2003).
D.S. Dunn, L. Yang, Y.-M. Pan, and G.A. Cragnolino. Localized
Corrosion Susceptibility of Alloy 22. Proceedings of the CORROSION 2003
Conference Paper No. 697, Houston, TX: NACE International (2003). A. Andreko, N. Sridhar, C.S. Brossia, D.S. Dunn, L.T. Yang, B.J.
Saldanha, S.L. Grise, and M.H. Dorsey. An Electrochemical Approach to
Predicting and Monitoring Localized Corrosion in Chemical Process
Streams. Proceedings of the CORROSION 2003 Conference Paper No. 375,
Houston, TX: NACE International (2003). G.A. Cragnolino, D.S. Dunn, C.S. Brossia, Y.-M. Pan, O Pensado,
and L.Yang. Corrosion Behavior of Waste Package and Drip Shield
Materials. Proceedings 10th International High-Level Radioactive Waste
Management Conference, Las Vegas, NV. March 30-April 3, (2003).
D.S. Dunn, O. Pensado, C.S. Brossia, G.A. Cragnolino, N. Sridhar,
and T.M. Ahn. Modeling Corrosion of Alloy 22 as a High Level
Radioactive Waste Container Material. Prediction of Long-Term Corrosion
Behavior in Nuclear Waste Systems. Proceedings of an International
Workshop, Cadarache, France, 2002. D. Feron and D.D. Macdonald, eds,
Maney Publishing. London, UK, pp. 208-224 (2003). C.S. Brossia, G.A. Cragnolino, D.S. Dunn, O. Pensado, N. Sridhar,
L.T. Yang, and T. M. Ahn. Life Prediction of Container Materials do
High-Level Nuclear Waste Repository. Proceedings of the First Asian and
Oceanic Congress for Radiation Protection, Seoul, Korea, October 20-24
(2002). L. Yang and D.S. Dunn. Evaluation of Inhibitors in Cooling Water Systems Using
Coupled Multi-Electrode Array Sensor. Proceedings of CORROSION 2002
Conference Paper No. 004, Houston, TX: NACE International (2002). C.S. Brossia and D.S. Dunn. Condition Based Coating Degradation
Sensor. Proceedings of CORROSION 2002 Conference Paper No. 161,
Houston, TX: NACE International (2002).
D.S. Dunn, Y.-M. Pan, and G.A. Cragnolino. Stress Corrosion
Cracking of Nickel-Chromium-Molybdenum Alloys in Chloride Solutions.
Proceedings of CORROSION 2002 Conference Paper No. 425, Houston, TX:
NACE International (2002).
D.S. Dunn, and C.S. Brossia. Assessment of Passive and Localized
Corrosion Processes for Alloy 22 as a High-Level Nuclear Waste Container
Material. Proceedings of CORROSION 2002 Conference Paper No. 548,
Houston, TX: NACE International (2002). C.S. Brossia, G.A. Cragnolino, and D.S. Dunn. Effect of Oxide
Thickness on the Localized Corrosion of Zircalloy. Proceedings of
CORROSION 2002 Conference Paper No. 549, Houston, TX: NACE International
(2002). G.A. Cragnolino,
O. Pensado, D.S. Dunn, C.S. Brossia, and N. Sridhar. Lifetime
Prediction of High-Level Radioactive Waste Containers Affected by
Corrosion. 15th International Corrosion Congress, Granada, Spain,
September (2002). G.A.
Cragnolino, D.S. Dunn, and Y.-M. Pan. Localized Corrosion
Susceptibility of Alloy 22 as a Waste Package Container Material.
Scientific Basis for Nuclear Waste Management XXV, B.P. McGrail and G.A.
Cragnolino eds, Warrendale, PA: Materials Research Society Symposium
Proceedings Vol. 713, pp. 53-60 (2002).
Y.-M. Pan, C.S. Brossia, G.A. Cragnolino, D.S. Dunn, V. Jain, and
N. Sridhar. Evolution of Solution Chemistry through Interactions with
Waste Package Internal Structural Components. Scientific Basis for
Nuclear Waste Management XXV. B.P. McGrail and G.A. Cragnolino eds,
Warrendale, PA: Materials Research Society Symposium Proceedings Vol.
713, pp. 121-127 (2002). C.S. Brossia and D.S. Dunn. Paint Integrity and Corrosion Sensor.
SAE World Congress 2002, paper no. 02B-158 (2002). C.S. Brossia, G.A. Cragnolino, and D.S. Dunn. Effect of Oxide
Thickness on the Localized Corrosion of Zircaloy. Corrosion/2002, paper
no. 02549 (2002). C.S.
Brossia and D.S. Dunn. Condition-Based Coating Degradation
Sensor. Corrosion/2002, paper no. 02161 (2002). N. Sridhar, C.S. Brossia, D.S. Dunn, and A. Anderko. Predicting
Localized Corrosion in Seawater Cooling Systems. Corrosion/2002, paper
no. 02204 (2002). D.S.
Dunn and C.S. Brossia. Assessment of Passive and Localized Corrosion
Processes for Alloy 22 as a High-Level Nuclear Waste Container Material.
Corrosion/2002, paper no. 02548 (2002). C.S. Brossia, G.A. Cragnolino, D.S. Dunn, O. Pensado, N. Sridhar,
L.T. Yang, and T.M. Ahn. Life Prediction of Container Materials for
High-Level Nuclear Waste Repository. First Asian and Oceanic Congress
for Radiation Protection Conference, accepted (2002). C.S. Brossia, D.S. Dunn, and O. Moghissi. Approaches to Confirm
Waste Package Performance. International High Level Radioactive Waste
Management Conference (2001). G.A. Cragnolino, D.S. Dunn, Y.-M. Pan, and N. Sridhar. The
Critical Potential for the Stress Corrosion Cracking of Fe-Cr-Ni Alloys
and Its Mechanistic Implications. Chemistry and Electrochemistry of
corrosion and Stress Corrosion Cracking: A Symposium Honoring the
Contributions of R.W. Staehle. R.H. Jones, ed, The Minerals, Metals and
Materials Society. Warrendale, PA., pp. 83-104 (2001). G.A. Cragnolino, D.S. Dunn, Y.-M. Pan, and O. Pensado. Corrosion
Processes Affecting the Performance of Alloy 22 as a High-Level
Radioactive Waste Container Material. Scientific Basis for Nuclear
Waste Management XXIV, K.P. Hart and G.R. Lumpkin eds, Warrendale, PA:
Materials Research Society Symposium Proceedings Vol. 663, pp. 507-514
(2001). D.S. Dunn,
C.S. Brossia, and O. Pensado. Long-Term Dissolution Behavior of Alloy
22: Experiments and Modeling. Corrosion/2001, paper no. 01125 (2001). N. Sridhar,
D.S. Dunn, C.S. Brossia, and G.A. Cragnolino.
Stabilization and Repassivation of Localized Corrosion. NACE Topical
Research Symposium on Localized Corrosion (2001). G.A. Cragnolino, C.S. Brossia, D.S. Dunn, and C.A. Greene.
General and Localized Corrosion of Zircaloy Under High-Level Radioactive
Waste Disposal Conditions. 10th International Conference on
Environmental Degradation of Materials in Nuclear Power Systems – Water
Reactors, NACE International (2001). C.A. Greene, C.S. Brossia, D.S. Dunn, and G.A. Cragnolino.
Environmental and Electrochemical Factors on the Localized Corrosion of
Zircaloy-4. Corrosion/2000, paper no. 210 (2000). N. Sridhar,
D.S. Dunn, C.S. Brossia, and O.C. Moghissi. Corrosion
Monitoring Techniques for Thermally Driven Wet and Dry Systems.
Corrosion/2000 paper no. 00283 (2000).
D.S. Dunn, M.B. Bogart, C.S. Brossia, and G.A. Cragnolino.
Corrosion of Iron Under Alternating Wet and Dry Conditions.
Corrosion/99, paper no. 223 (1999). C.S. Brossia, D.S. Dunn, and N. Sridhar. The Role of Metal Salt
Film Formation on Localized Corrosion Stabilization. Critical Factors in
Localized Corrosion - III, Electrochemical Society Proceedings Volume
98-17, pp. 485-499 (1998).
C.S. Brossia and D.S. Dunn. Apparatus and Method for
Detecting the Degradation of a Coating Using Embedded Sensors.
Patent Number 6,911,929, June 28, 2005. O. Moghissi, D.S. Dunn, and N. Sridhar. Disbonded Coating
Cathodic Protection Monitoring Coupon. Patent Number 6,772,622,
August 10, 2004.
Marta Jakab
Presuel-Moreno, F., Jakab, M.A., Wang, H.W.,
Kelly, R.G., Scully, J.R., Computational Modeling of Active
Corrosion Inhibitor Release from An Al-Co-Ce Metallic Coating:
Protection of Exposed 2024-T3, Journal of the Electrochemical
Society, 153(11), B486-B498, 2006
Jakab, M.A., Scully, J.R., Design Of Cathodic
Inhibition For Aa2024-T3 Guided By Understanding Heterogeneous
Cathodic Reaction Kinetics, EOS Transactions, 1(9), 47-63, 2006
Jakab, M. A., Presuel-Moreno, F., Scully, J. R.,
Effect of Molybdate, Cerium and Cobalt Ions on the Oxygen Reduction
Reaction on Aa2024-T3 and Selected Intermetallics: Experimental and
Modeling Studies, Journal of the Electrochemical Society, 153(7),
B244-B252, 2006
Little, D.A.; Jakab, M.A., Scully, J. R., The
Effect of Surface Pretreatment on Under-Paint Corrosion of Aa2024-T3
At Various Temperatures, Corrosion, 62(4), 300-315, 2006
Jakab, M. A.; Scully, J. R., Storage And Release
Of Inhibitor Ions From Amorphous Al-Co-Ce Alloys: Controlled Release
On Demand, Nature Materials, 4 (9), 667-670, 2005
Presuel-Moreno, F.P.; Jakab, M. A.; Scully, J.R., Inhibition Of The Oxygen Reduction Reaction On Copper With
Cobalt, Cerium, And Molybdate Ions, Journal of the Electrochemical
Society, 152 (8), B376-B387, 2005
Jakab, M.A.; Little, D.A.; Scully, J.R.,
Experimental And Modeling Studies Of The Oxygen Reduction Reaction
On Aa2024-T3, Journal of the Electrochemical Society, 152 (8),
B311-B320, 2005
Jakab, M.A.; Presuel-Moreno, F.; Scully, J.R.,
Critical Concentrations Associated With Cobalt, Cerium And
Molybdenum Inhibition Of Aa2024-T3 Corrosion: Delivery From Al-Co-Ce(-Mo)
Alloys, Corrosion, 61 (3) 246-264, 2005
Nagy, N.M.; Jakab, M.A.; Konya, J.; Antus S.,
Convenient Preparation Of 1,1-Diacetates From Aromatic Aldehydes
Catalysed By Zinc-Montmorillonite, Applied Clay Science, 21 (3-4)
213-216, 2002
Meng, Q.; Moran, A. L.; Tailleart, N.; Jakab, M.A.; Scully, J.R., Characterization And Mechanical Corrosion
Properties of Amorphous Al-Co-Ce Coatings, Proceedings of the
Tri-Service Corrosion Conference, Orlando, Fl, November 2005
Jakab, M.A., Presuel-Moreno, F.; Scully, J.R.,
Critical Concentrations Associated With Cobalt, Cerium And
Molybdenum Inhibition Of Aa2024-T3 Corrosion: Delivery From Al-Co-Ce(-Mo)
Alloys, Corrosion And Protection of Light Metal Alloys, The
Electrochemical Society Proceedings Series Ed. R.G. Buchheit, R.G.
Kelly, N.A. Missert, B.A. Shaw, Pv 2003-23, Pennington, NJ
Garth Tormoen
G. Tormoen, J.
Burket, J.F. Dante, and N. Sridhar. Monitoring the Adsorption of Volatile
Corrosion Inhibitors in Real Time with Surface Enhanced Raman
Spectroscopy. Corrosion 62 (12) (2006)1082-1091.
G.W. Tormoen, J.
Drelich and J. Nalaskowski. A Distribution of AFM Pull-off Forces for
Glass Microspheres on a Symmetrically Structured Rough Surface. J.
Adhesion Sci. Technol. 19, (3-5) (2005), 215-234.
G.W. Tormoen and
J. Drelich. Deformation of Soft Colloidal Probes during AFM Pull-off
Force Measurements: Elimination of Nano-roughness Effects. J.
Adhesion Sci. Technol. 19, (3-5) (2005), 181-198.
G. Tormoen, J.
Drelich and E.R. Beach. Analysis of atomic force microscope pull-off
forces for gold surfaces portraying nanoscale roughness and specific
chemical functionality. J. Adhesion Sci. Technol. 18(1) (2004)
1-17.
G. Tormoen, J.F.
Dante and N. Sridhar. Correlation of In Situ VCI Adsorption Monitoring
with Real-Time Corrosion Rate Measurements. Paper 07356 at NACE
CORROSION 2007 Annual Meeting, Nashville, TN
Garth Tormoen,
Jayme Burket, James Dante and Narasi Sridhar. Quantitative Measurement
of VCI Adsorption. SwRI: Paper 06T079 Presented at the 2005 Triservice
Corrosion Conference. Orlando, FL.
G. Tormoen and J.
Drelich. Roughness Considerations for Adhesion Characteristics at the
Nanoscale. Michigan Technological Univ. SME Annual Meeting 2004. Denver,
CO.
Julio G.
Maldonado
J.G. Maldonado and R.D. Kane, Failure Analysis Investigation of
Super Duplex Stainless Steel Tubing, Stainless Steel World, Vol.
13, p. 42, March 2002.
J.G. Maldonado, M.S. Cayard, and R.D. Kane, Pitting Tensile
Overloading Produce Most Coiled-Tubing Failures, Oil and Gas
Journal, Vol. 98.26, June 2000.
R.D. Kane, J.G. Maldonado, and W.G. Ashbaugh,
Cracking Down on Corrosion, Chem. Eng., Vol. 107, No. 3, p. 74, March
2000.
E. Ferreyra, J.G. Maldonado, L.E. Murr, S. Pappu, E.A. Trillo,
C. Kennedy, M. Posada, J. De Alba, R. Chitre and D.P. Russell,
Materials Science and Metallurgy of the Caribbean Steel Drum, Part II:
Heat Treatment, Microstructures, Hardness Profiles and Tuning Effects, J. Mater. Sci. 34, p. 981, 1999.
L.E. Murr, E. Ferreyra, J.G. Maldonado, E.A. Trillo, S. Pappu,
C. Kennedy, J. De Alba, M. Posada, D.P. Russell and J.L. White,
Materials Science and Metallurgy of the Caribbean Steel Drum, Part I:
Fabrication, Deformation Phenomena and Acoustic Fundamentals,
J. Mater. Sci. 34, p. 967, 1999.
R. Beltran, J.G. Maldonado, L.E. Murr, and W.W. Fisher,
Effects of Strain and Grain Size on Carbide Precipitation and
Corrosion Sensitization Behavior in 304 Stainless Steel, Acta
mater. 45, No. 10, p. 4351, 1997.
M.A.M. Bourke, J.G. Maldonado, D. Masters, K. Meggers, and
H.G. Priesmeyer, Real Time Measurement by Bragg Edge Diffraction of
the Reverse ( ' ) Transformation in a Deformed 304 Stainless Steel,
Mater. Sci. Eng. A221, p. 200, 1996.
E.A. Trillo, R. Beltran, J.G. Maldonado, R.J. Romero, L.E.
Murr, W.W. Fisher, and A.H. Advani, Combined Effects of Deformation
(Strain and Strain State), Grain Size, and Carbon Content on Carbide
Precipitation and Corrosion Sensitization in 304 Stainless Steel,
Mater. Charac., Vol. 35, pp. 99-112, 1995.
J.G. Maldonado and N. Sridhar, SCC of Carbon Steel in Fuel Ethanol
Service: Effect of Corrosion Potential and Ethanol Processing
Source, Corrosion 2007, paper No. 07574, NACE International, 2007.
R.D. Kane, J.G. Maldonado and P.W. Moore, Full Scale Testing
of Pipe Containing Surface Imperfections in H2S and Non-H2S
Environments, Corrosion 2006, Paper No. 06131, NACE International,
2006.
P.W. Moore and J.G. Maldonado, Review of the Recent API PRAC
Project Attempt to Evaluate the ISO DIS 10400 Failure Assessment
Diagram Through Full Scale Testing of Pipe Containing Surface
Imperfections, SPE 97578, Society of Petroleum Engineers, 2005.
J.G. Maldonado, E.A. Trillo, M.S. Cayard and R.D. Kane,
Serviceability of Coiled Tubing in Corrosive Workover and
Production Environments, Corrosion 2005, Paper No. 06809, NACE
International, 2005.
J.G. Maldonado and R.D. Kane, Stress Corrosion Cracking of
Carbon Steel in Fuel Ethanol Service, Environment-Induced Cracking
of Materials (EICM-2) Conference Proceedings, Paper No. 103, Banff,
Canada, September 2004.
J.G. Maldonado and J.W. Skogsberg, Cracking Susceptibility
of Duplex Stainless Steel at an Intermediate Temperature in the
Presence of H2S Containing Environments, Corrosion 2004, Paper No.
04134, NACE International, 2004.
R.D. Kane, J.G. Maldonado and L.J. Klein, Stress Corrosion
Cracking in Fuel Ethanol: A Newly Recognized Phenomenon, Corrosion
2004, Paper No. 04543, NACE International, 2004.
R.D. Kane, E. Trillo and J.G. Maldonado, Naphtenic Acid: The
Roles of Velocity, Alloying, TAN and Sulfur Species, LATINCORR 2003
Proceedings, Santiago, Chile, October 2003.
J.G. Maldonado, M.S. Cayard, M.E. Fahrion and J.C. Brown, SCC
Evaluation of N04400 in Crude Unit Atmospheric Overhead Refinery
Environment, Corrosion 2000, Paper No. 686, NACE International,
2000.
M.S. Cayard and J.G. Maldonado, Use and Misuse of Laboratory
Tests, Corrosion 2000, Paper No. 132, NACE International, 2000.
E. Ferreyra, L.E. Murr, S. Pappu, J.G. Maldonado and C.
Kennedy, Effect of Heat Treatment on the Multi-Harmonic Tuning and
Acoustics of the Caribbean Steel Drum, Heat Treating Proceedings,
p. 340, ASM International, Materials Park, OH, 1999.
J.G. Maldonado, M.S. Cayard and R.D. Kane, Results of
Industry Experience Survey on Coiled Tubing Uses and Failures,
Corrosion 99, Paper No. 613, NACE International, 1999.
R.D. Kane, J.G. Maldonado, C.J. Joia, A.L. Small and J.A.C.
Ponciano, Rapid Screening of Stainless Steels for Environmental
Cracking, LATINCORR '98, Paper No. S2-01, NACE International, 1998.
S.W. Dean, J.G. Maldonado and R.D. Kane, Cyclic Strain
Cracking of Stainless Steels in Hot Steam-Hydrocarbon Reformer
Condensates: Test Method Development, Environmentally Assisted
Cracking: Predictive Methods for Risk Assessment and Evaluation of
Materials, Equipment, and Structures ASTM STP 1401, R.D. Kane, Ed.,
American Society for Testing and Materials, p. 429, West
Conshohocken, PA, 2000. (This paper received the 2000 ASTM Committee
G01 Sam Tour Award for Outstanding Merit in the Field of Improvement
in Corrosion Testing Technology.)
J.G. Maldonado, T.V. Bruno, Production Research Committee,
API PRAC Project 2002-100300 Final Report, Evaluation of the
Accuracy of the ISO DIS 10400 Failure Assessment Diagram Through
Full Scale Testing of Pipe Containing Surface Imperfections,
American Petroleum Institute (API), Washington, DC, April 12, 2005.
R.D. Kane and J.G. Maldonado, Stress Corrosion Cracking of
Carbon Steel in Fuel Grade Ethanol: Review and Survey, API
Technical Report 939-D, American Petroleum Institute, Washington,
DC, September 2003.
James Dante
Garth Tormoen , Jayme Burket, James F. Dante, and Narasi
Sridhar, Monitoring the Adsorption of Volatile Corrosion Inhibitors
in Real Time with Surface Enhanced Raman Spectroscopy, Corrosion,
Vol. 62, No. 12, p. 1082 (2006)
N. Sridhar, K. Price, J. Buckingham, J.
Dante, Stress
Corrosion Cracking of Carbon Steel in Ethanol, Corrosion, Vol. 62,
No. 8, p. 687 (2006)
Christopher J. McNamara, Thomas D. Perry IV, Ryan Leard, Kristen
Bearce, James Dante, Ralph Mitchell, Corrosion of Aluminum
Alloy 2024 by Microorganisms Isolated from Aircraft Fuel Tanks
Biofouling, 21(5/6), 2005.
J. F. Dante and R. G. Kelly, The Evolution of the Adsorbed
Solution Layer During Atmospheric Corrosion and its Effects on the
Corrosion Rate of Copper, J. Electrochem. Soc., Vol. 140, No. 7,
July (1993).
J. Dante, K. Price, A. Sabata, and B. Sabata, Embedded
Coating Degradation Sensors for Monitoring Performance of Temporary
Coatings, CORROSION/2007 Conference, paper 07387 (NACE
International, Houston, TX: 2007).
G. Tormoen, J. Dante, and N. Sridhar, Correlation of
In Situ VCI Adsorption Monitoring withReal-Time Corrosion Rate
Measurements, CORROSION/2007 Conference, paper 07356 (NACE
International, Houston, TX: 2007).
K. Price, J. Buckingham, and J. Dante, CPC Performance in
Occluded Sites, CORROSION/2007 Conference, paper 07226 (NACE
International, Houston, TX: 2007).
L. Petry, D. Hansen, and J. Dante, Analysis of Isocyanate-Free
Aircraft Topcoats by Electrochemical Impedance Spectroscopy,
CORROSION/2007 Conference, paper 07236 (NACE International, Houston,
TX: 2007).
James F. Dante, Darrell S. Dunn, and Kendra T. Price,
Electrochemical and Mott-Schottky Behavior of the Oxide Films on
I625 Exposed to Gamma Radiation, Proceedings of the Passivity-9
Conference, Paris, France (June 2005).
For more information about
our materials performance and characterization publications, or how you can contract with
Southwest Research Institute (SwRI), please e-mail
Lori Salas, or call (210) 522-2203.
|
|
Contact Information |
|
Lori Salas
Materials Performance and Characterization
(210) 522-2203
lsalas@swri.org |
|
Related Terminology |
|
corrosion research
pipeline corrosion
coatings
corrosion sensors
corrosion life prediction
stainless steel
laser Raman spectroscopy
corrosion monitoring
cathodic protection
microbiologically influenced corrosion |
| |
|
