Transient Analysis Pulsation Solver (TAPS)


Department Publications

Brochures

Technical Publications


Contact Information

Eugene "Buddy" Broerman, III
Principal Engineer
Fluid Machinery Systems
(210) 522-2555
ebroerman@swri.org

Discharge Bottle.

SwRI uses 3D gas passage system analysis to develop the 1D fluid model representation for TAPS.

To perform API 618 pulsation analyses or transient fluid modeling (in general), Southwest Research Institute (SwRI) utilizes a full Navier Stokes solution in one-dimension, which can be analyzed in time or frequency domain. The full one-dimensional time-domain flow solver, named Transient Analysis Pulsation Solver (TAPS), is applicable to any complex manifold and piping system and was developed internally by SwRI. To date, TAPS is the most comprehensive physical model in the industry.

Boundary conditions include:

  • Velocity or pressure constants
  • Time-varying excitation functions

The reciprocating compressor is modeled in TAPS as a velocity varying boundary condition at the speeds and operating conditions provided by the operating company. The transient flow solver includes all terms of the governing equations including:

  • Fluid inertia
  • Diffusion
  • Viscosity
  • Energy dissipation

The model is a finite difference numerical solution of the Navier Stokes equations.

Frequency and Amplitude Graph

The new TAPS solver predicts frequency and amplitude shifts due to damping effects.

All compressor cylinder gas passages, nozzle geometries and manifold bottles are modeled and discretized within the solver. This model is then used to determine the natural acoustic response modes of the fluid piping system, the excitation frequencies and the resulting pulsation amplitudes and frequencies.

The state of the fluid in a piping system is determined by two factors:

  • The kinematics of the forcing inlet boundary condition to the piping system
  • The fluid dynamic behavior (response) of the fluid within the piping system and the passive outlet boundary condition.

Pressure losses inside the pipe and at the interfaces are determined from friction loss models and viscosity losses are directly calculated from the discretized viscosity term of the momentum equation (in the flow direction); these two terms are applied at every time step at every applicable node. Boundary end-conditions, such as open ended pipe, closed pipe, or infinite pipe also must be defined but are relatively straight forward to determine from basic physics.

3D Cylinder Gas Passage and Nozzle Pulsation

Analysis in the areas near the compressor suction and discharge valves, a 3D model of the fluid domain is often necessary to accurately characterize the various acoustic responses of the gas passage and the passage area combined with the nozzle and filter bottle. The 3D pulsation analysis is conducted using a detailed solid model of the cylinder gas passage typically provided by the original equipment manufacturer (OEM).

The gas passage solid model is combined with a cylinder nozzle and the geometry of the primary chamber of the filter bottle. The fluid domain of this 3D geometry is meshed and analyzed using ANSYS and ANSYS CFX. The two solutions in combination provide an accurate prediction of the frequencies and relative amplitudes for all relevant gas passage internal responses and cylinder nozzle responses. The results can be used to develop a one-dimensional (1D) cylinder gas passage representation for the 1D pulsation analysis that uses modeling software (TAPS) based on the Navier Stokes equations. The results can also be used to design a filter system with well-placed nozzle responses.

Contact us for more information about our TAPS design tool capabilities, or how you can contract with SwRI.

We can offer you the best approach for solving your compressor system or pump system analysis problem.

Benefiting government, industry and the public through innovative science and technology
Southwest Research Institute® (SwRI®), headquartered in San Antonio, Texas, is a multidisciplinary, independent, nonprofit, applied engineering and physical sciences research and development organization with 10 technical divisions.
02/08/16