Rotating Machinery Technologies Home
Contact Us
SwRI Information
Rotating Machinery Technologies Site Map
Espaņol |
1989
Baldwin, R.M. and H.R. Simmons.
Flow-Induced Vibration in Safety Relief Valves: Design and Troubleshooting
Methods. ASME Paper No. 84-PVP-8, ASME PVP Conference and Exhibition,
San Antonio, Texas, June 17–21, 1989.
Cheruvu, N.S. The Influences of Impurity
Content, Tensile Strength, and Grain Size on In-Service Temper Embrittlement
of CrMoV Steels. Metallurgical Transactions A, Vol. 20A, pp.
2345–2354, November 1989.
Cheruvu, N.S. Degradation of Mechanical
Properties of Cr-Mo-V and 2.25Cr-1Mo Steel Components After Long-Term
Service at Elevated Temperatures. Metallurgical Transactions
A, Vol. 20A, pp. 87–97, January 1989.
Cheruvu, N.S. Elevated
Temperature Fatigue Crack Growth Behavior of a Rotor Steel. Engineering Fracture
Mechanics, Vol. 34, No. 2, pp. 457–463, 1989.
Millwater, H.R., Y.T. Wu, J.B. Dias, R.C. McClung, S.T. Raveendra,
and B.H. Thacker. The NESSUS Software System
for Probabilistic Structural Analysis. Proceedings of ICOSSAR '89,
International Conference on Structural Safety and Reliability, San
Francisco, California, August 1989.
Smalley, A.J. The Dynamic
Response of Rotors to Rubs During Startup. Presented at the 1987 ASME
Design Technology Conferences—11th Biennial Conference on Mechanical
Vibration and Noise, Boston, Massachusetts, September 27–30, 1987; Published
in the proceedings, Rotating Machinery Dynamics, DE-Vol. 2, pp. 467-475.
Also published in Journal of Vibration, Acoustics, Stress, and Reliability
in Design, Vol. 111, No. 3, pp. 226–233, July 1989.
Smalley, A.J., R.M.
Baldwin, D.P. Fleming, and J.S. Yuhas. Spray Automated Balancing of Rotors:
How Process Parameters Influence Performance. Presented at the 1989 ASME Design
Technical Conferences—12th Biennial ASME Conference on Mechanical Vibration
& Noise, Montreal, Quebec, Canada, September 17–21, 1989; Published in the
proceedings, Rotating Machinery Dynamics, DE-Vol. 18–1, pp. 381–387, 1989.
Swaminathan,V.P. Remaining Life Assessment of
Turbine-Generator Rotors Under Planned Maintenance Program. EPRI Conference on Plant Maintenance Technology, Houston,
Texas, November 1989.
1988
Cheruvu, N.S. In-Service
Degradation of High Temperature Steam Turbine Components. International
Conference on Remaining Life Assessment and Extension, The Hague,
Netherlands, June 1988.
Cheruvu, N.S. Influence of Load Line Shift
on SCC Crack Growth Behavior of Type 422 Stainless Steel in NaCl Solution. International Corrosion Forum, Corrosion 88, New Orleans,
Louisiana: National Association of Corrosion Engineers, V. 44, No. 10, pp.
755–760, 1988.
1987
McKee, R.J. and H.R.
Simmons. Blade Passing Related
Problems in Centrifugal Pumps. Presented at
the EPRI Symposium on Power Plant Pumps, New Orleans, Louisiana, March 1987.
Simmons, H.R. Non-intrusive Detection of
Turbine Blade Resonance. Presented at Third EPRI Conference
on Incipient Failure Detection in Power Plants, Philadelphia, Pennsylvania,
March 10–12, 1987.
Swaminathan, V.P., N.S. Cheruvu, and
A. Saxena. Life Assessment of an HP-IP
Rotor Under Creep Service Conditions. ASME Joint Power Generation Conference, Miami, Florida, Paper No.
87-JPGC-PWR-33, October 1987.
1986
Baldwin, R.M., A.J. Smalley, and
H.R. Simmons. Development of Computer-Aided Solutions for Rotating Equipment
Vibrations. Presented at the EPRI Rotating Machinery,
Dynamics, Bearings, and Seals Symposium, St. Louis, Missouri, September
9–11, 1986.
Swaminathan, V.P.,
R.I. Jaffee, and J.E. Steiner. Mechanical Properties of
Advanced Technology 1CrMoV Steam Turbine Rotor Forgings. Steel Forgings, ASTM STP 903, E.G. Nisbet and
A.S. Mellili, Eds., ASTM, Philadelphia, Pennsylvania, pp. 124–142, 1986.
Simmons, H.R. A Non-Intrusive Method for
Detecting HP Turbine Blade Resonance. ASME Paper No.
86-JPGC-Pwr-36, 1986 Joint ASME/IEEE Power Generation Conference, Portland,
Oregon, October 19–23, 1986.
1985
Cheruvu, N.S. Life Analysis of
Oklahoma Gas & Electric Company Mustang 3, HP-IP Rotor. ASME/IEEE
Power Generation Conference, Milwaukee, Wisconsin: The American Society of
Mechanical Engineers, Paper 85-JPGC-Pwr-29, October 1985.
Evans, B.F., A.J. Smalley, and
H.R. Simmons. Startup of Synchronous Motor
Drive Trains: The Application of Transient Torsional Analysis to Cumulative
Fatigue Assessment. Presented
at the ASME Design Engineering Division Conference and Exhibit on Mechanical
Vibration and Noise, Cincinnati, Ohio, September 10–13, 1985; ASME Paper No.
85-DET-122, 1985.
Simmons, H.R., R.M. Baldwin, D.L.
Coke, and J.D. Bricker. Power Plant Fan Dynamics:
The Influence of Shaft Thermal Bow. Presented at the Joint Power Generation Conference,
Milwaukee, WS, October 20–24, 1985.
Simmons, H.R. and A. Lifshits. Vibration Measurements for
Determining Plant Component Reliability. Presented at American Power Conference, Chicago, Illinois, April 23–25,
1985.
Swaminathan, V.P., R.I. Jaffee, and J.E.
Steiner. Significant Improvements in
the Properties of CrMoV HP Rotors by Advanced Steel Making. Life Assessment and Improvement
of Turbo-Generator Rotors for Fossil Plants, R. Viswanathan, Ed., EPRI
CS-4160, Pergamon Press, 1985.
1984
Evans, B.F. and A.J.
Smalley. Subsynchronous Vibrations in
a High Pressure Centrifugal Compressor: A Case History. Presented at Rotordynamic Instability Problems in High-Performance
Turbomachinery—1984 Workshop, Texas A&M University, College Station, Texas,
May 28–30, 1984.
Simmons, H.R.
and A.J. Smalley. Lateral Gear Shaft Dynamics
Control Torsional Stresses in Turbine Driven Compressor Train. International Gas Turbine Conference and Exhibit,
Amsterdam, The Netherlands, ASME Paper No. 84-GT-28, June 4–7, 1984.
1983
Lund, J.W., A.J. Smalley, J.A. Tecza, and J.F.
Walton. Squeeze Film Damper
Technology: Part 1—Prediction of Finite Length Damper Performance. ASME Paper No. 83-GT-247, 1983.
Simmons, H.R. Disk-Wobble
Resonance May Confuse Fan-Balance Task. Power Magazine, September 1983.
Smalley, A.J. Torsional System
Damping. Presented at the Vibration Institute Machinery Vibration
Monitoring and Analysis Meeting, Houston, Texas, April 19–21, 1983.
1982
Parkinson, A.G., M.S. Darlow,
and A.J. Smalley. The Balancing of Flexible
Rotating Shafts Which Have an Initial Bend. AIAA/ASME/ASCE 23rd Structures, Structural Dynamics and
Materials Conference, New Orleans, Louisiana, May 1982.
1981
Simmons, H.R. Structural
Stiffness and Mode Shape Identification by Regression Analyses. Proceedings
of the 1981 Advances in Aerospace Structures and Materials—AD-01, ASME
Winter Annual Meeting, Structures and Materials Conference, November 1981.
SwRI can offer you a full range of capabilities and experience in
rotating machinery technologies including becoming an extension of your engineering department. For
more information about rotating machinery technologies, or how you
can contract with Southwest Research Institute (SwRI), please contact
Jeff
Moore, Ph.D., at
jmoore@swri.org
or (210) 522-5812.
machinery.swri.org
|
|
