Allison, T.,
Lerche, A., Moore, J.J. Experimental Validation of Empirical Methods for
Dynamic Stress Prediction in Turbomachinery Blades. Proceedings of ASME
Turbo Expo Paper GT2011-45901: Power for Land, Sea and Air: Vancouver, British
Columbia, Canada. June 6-10, 2011.
Delgado, H.,
Moore, J., Garcia, A. Determination of Residual Stresses on a Centrifugal
Compressor Impeller. GT2011-46601, Proceedings of ASME Turbo Expo: Power for
Land, Sea and Air: Vancouver, British Columbia, Canada. June 6-10, 2011
Delgado-Garibay, H.A., and Garcia-Hernandez, A.J. Estudios Utilizados Para
Prevención De Problemas Relacionados Con Tuberías En El Diseño De Un Tren De
Bombeo. XII Congreso y Exposición de Turbomaquinaria, Queretaro,
Mexico.
February 21-25, 2011.
Garcia-Hernandez, A.J., Brun, K., and Delgado-Garibay, H. Modeling and
Testing of Centrifugal Compressor Surge. Paper presented at the XII
Turbomachinery Congress and Exhibition held in Queretaro, Mexico. February 2011.
PUBLICATION AND PRESENTATION.
Garcia-Hernandez, A.J. and Brun, K. Energy Usage in Natural Gas Pipeline
Applications. ASME Technology Journal.
PUBLICATION ONLY.
2011.
Garcia-Hernandez, A.J. and Brun, K. Energy Usage in Natural Gas Pipeline
Applications. Paper presented at the ASME Turbo Expo: Power for Land, Sean
and Air, GT2010, Vancouver, Canada.
PUBLICATION AND PRESENTATION.
June 2011.
Garcia-Hernandez, A.J. Modeling and Simulation Case Study of a Batching
Operation of Crude Oils in a Pipeline System. Paper presented at the
Pipeline Simulation Interest Group (PSIG) Annual Conference, NAPA Valley, CA,
USA. PUBLICATION AND PRESENTATION.
May 2011.
Iyengar, V.,
James, S., Simmons, H. A First Principles Based Methodology for Design of
Axial Compressor Configurations: Part II- Comprehensive Application.
GT2011-45936. Presented at International Gas Turbine Institute Turbo Expo,
Vancouver, BC, Canada. June 2011.
Iyengar, V.,
James, S., Simmons, H. On Remaining Life Analysis of Turbine Disk That is
Subject to High Thermal Stresses. GT2011-45082. Presented at International
Gas Turbine Institute Turbo Expo, Vancouver, BC, Canada. June 2011.
Iyengar, V.,
Simmons, H. Effect of Non-Uniform Blade Root Friction and Sticking on Disk
Stresses. GT2011-46689. Presented at International Gas Turbine Institute
Turbo Expo, Vancouver, BC, Canada, June 2011.
Iyengar, V.,
Allison, T., Wilcox, M. Concentrating Solar Power (CSP) Technologies.
Tutorial presented at International Gas Turbine Institute Turbo Expo, Vancouver,
BC, Canada. June 2011.
Lerche, A.,
Moore, J., Allison, T., Lubell, D., Ransom, D. Experimental Study of Blade
Vibration in Centrifugal Compressor Blades. GT2011-45928, Proceedings of
ASME Turbo Expo: Power for Land, Sea and Air, Vancouver, British Columbia,
Canada. June 6‑10, 2011.
Moore, J.J.,
Lerche, A., Delgado, H., Allison, T., Pacheco, J., “Development of Advanced
Centrifugal Compressors and Pumps for Carbon Capture and Sequestration
Applications,” Proceedings of the Fortieth Turbomachinery Symposium, Houston,
Texas. September 12-15, 2011.
Moore, J.,
Delgado, H., Allison, T. Qualification Testing of a Liquid CO2 Turbopump for
Carbon Capture and Sequestration Applications. GT2011-45912, Proceedings of
ASME Turbo Expo: Power for Land, Sea and Air, Vancouver, British Columbia,
Canada. June 6-10, 2011.
Masala, A.,
Vannini, G., Ransom, D., Moore, J., Baudelocque, L. Numerical Simulation and
Full Scale Landing Test of a 12.5 MW Vertical Motorcompressor Levitated by
Active Magnetic Bearings. GT2011-46411, Proceedings of ASME Turbo Expo:
Power for Land, Sea and Air, Vancouver, British Columbia, Canada. June 6-10,
2011.
Moore, J.J.
and Lerche, A.H. Development of a High Speed Gas Bearing Test Rig to Measure
Rotordynamic Force Coefficients. Journal of Engineering for Gas Turbines and
Power, 133, Iss.10. May 2011.
de Wardt, J.,
Moore, T., McKenzie, Andy. FMECA and Commissioning - Guidelines to
effectively deliver technology and systems for successful Drilling Automation.
SPE/IADC Drilling Conference and Exhibition, Amsterdam, The Netherlands.
March 1-3, 2011.
Wilcox, M.,
Brun, K. Gas Turbine Inlet Filtration System Life Cycle Cost Analysis.
Proceedings of ASME TurboExpo 2011, Power for Land, Sea and Air, Vancouver,
Canada, GT2011-46708. June 6-10, 2011.
Wilcox, M.,
Iyengar, V., Allison, T. Concentrating Solar Power Tutorial. Tutorial
Presentation, ASME TurboExpo 2011, Vancouver, Canada. June 8, 2011.
Wilcox, M.
Gas Turbine Inlet Filtration System Life Cycle Cost Analysis. Paper
Presentation, ASME TurboExpo 2011, Vancouver, Canada. June 7, 2011.
Wilcox, M.
Reciprocating Compressor Performance. SwRI Pulsation Short Course, San
Antonio, Texas. March 30, 2011.
Wilcox, M.
Gas Turbine Inlet Filtration. ASME IGTI Gas Turbine Training Week, San
Antonio, Texas. February 22, 2011.
Baldwin, R.M.
What is Black Powder? It's Not My Job. Presentation at Pipe Tech Americas
Summit, Houston, Texas. January 20, 2010.
Broerman,
E.L., J.T. Gatewood, J.T. O’Grady, R.F. Troy, C.L. Rand, G.T. Stroud.
Identifying and mitigating flow-induced vibration in recycle loop gas piping at
a centrifugal compressor station. IPC2010-31656, presented at the 2010 GMRC
Gas Machinery Conference, Phoenix, AZ. October 4-6, 2010.
Broerman,
E.L., J.T. Gatewood, J.T. O’Grady, R.F. Troy, C.L. Rand, G.T. Stroud.
Identifying and mitigating flow-induced vibration in recycle loop gas piping at
a centrifugal compressor station. Presented at the 8th
International Pipeline Conference, Calgary, Alberta, Canada. September 27 –
October 1, 2010.
Kurz, R.,
Ohanian, S. and Brun, K. Compressors in High Pressure Pipeline Applications,
ASME Journal of Engineering for Gas Turbines and Power, GT2010-22018. 2010.
Brun, K., Kurz, R.,
Winkelman, B., Nored, M.G.
Gas Turbine Packaging Options and Features for Pipeline Applications.
Proceedings at the GMRC Gas
Machinery Conference. Phoenix, AZ. October 4-6, 2010.
Brun, K.,
Nored, M., Tweten, D., and Kurz, R. Dynamic Pressure Losses in Piping
Systems. 7th EFRC Conference, Florence, Italy. October 2010.
Brun, K.,
Tweten, D., Nored, M. G., and Kurz, R. Transient Pressure Loss in Compressor
Station Piping Systems. ASME Journal of Engineering for Gas Turbines and
Power, GT2010-22017. 2010.
Brun, K. and
Kurz, R. Analysis of the Effects of Pulsations on the Operational Stability
of Centrifugal Compressors in Mixed Reciprocating and Centrifugal Compressor
Stations. ASME Journal of Engineering for Gas Turbines and Power, vol. 132,
Issue 7. July 2010.
Kurz, R. and
Brun, K. Assessment of Compressors in Gas Storage Applications. ASME
Journal of Engineering for Gas Turbines and Power, Vol. 132, Issue 6. June 2010.
Brun, K. and
Iyengar, V. Southwest Research Institute Holds 2nd Annual Climate Change
Mitigation Technology Lecture Series. Global Gas Turbine News Trade Journal,
Supplement to Mechanical Engineering Magazine. February 2010.
Blieske, M.,
Kurz, R., Garcia-Hernandez, A. J., and Brun, K. Centrifugal Compressors
during Fast Transients. Proceedings of ASME TURBO EXPO, Glasgow, Scotland,
GT2010-22023. June 14-18, 2010.
Garcia-Hernandez, A. J. Case Study of Capacity and Power Compression Usage
Optimization in a Pipeline System. Paper presented at the GMC (Gas Machinery
Conference), Phoenix, AZ. PUBLICATION AND
PRESENTATION. October 4-6,
2010.
Garcia-Hernandez, A. J. Centrifugal Compressor Surge Modeling. Technology
Update presented at the GMC (Gas Machinery Conference), Phoenix, AZ.
PRESENTATION ONLY.
September 2010.
Garcia
-Hernandez, A. J. and Nored, M. G. Effective Pipeline Simulation Modeling.
Gas Machinery Journal, Article Transport Technology. August 2010.
Blieske, M.,
Kurz, R., Garcia-Hernandez, A.J., and Brun, K. Centrifugal Compressors During
Fast Transients. GT2010-22023; Paper presented at the ASME Turbo Expo: Power
for Land, Sea and Air, Glasgow, Scotland, UK. June 2010.
Garcia
-Hernandez, A. J. and Moore, T. Z. Modeling and Simulation Transient Analysis
Case Study of a Liquids Gathering System. Paper presented at the Pipeline
Simulation Interest Group (PSIG) Annual Conference, Bonita Springs, FL. May
2010.
Garcia
-Hernandez, A. J., Wilcox, M., Moore, T.Z. Hydraulic Modeling and Simulation
of Pumping Systems (Tutorial Sessions). Paper presented at the 26th
International Pump User Symposium, Houston, TX. March 2010.
Garcia
-Hernandez, A. J. and Moore, T. Z. Transient Analysis Case Study of a Liquid
Pipeline System. Paper presented at the 26th
International Pump User Symposium, Houston, TX. March 2010.
Gatewood,
J.T., A. Rivera. Reciprocating Compressor Field Testing and Troubleshooting:
Performance, Pulsation, and Vibration. Short Course presented at the GSRMS
(Gulf South Rotating Machinery Symposium), Baton Rouge, LA. March 2010.
Hollingsworth, J.R. At A Moment's Notice: SwRI Field Service Professionals
Travel the Globe to Provide Quick Response Solutions to Machinery and Piping
System Dynamics Problems. Technology Today, Volume 31, No. 3. Fall-Winter
2010.
Hollingsworth, J.R. Compressor Train Rotordynamic Design Audits: Essential
Reliability Tools. Compressor Tech Two Magazine, Vol. XV, Issue VII, pp
78-80. August-September 2010.
Lerche, A.H.,
Moore, J.J., Feng, Y. Computational Modeling and Validations Testing of
Dynamic Blade Stresses in a Rotating Centrifugal Compressor Using a Time Domain
Coupled Fluid-Structure Computational Model. Proceedings of ASME Turbo Expo:
Power for Land, Sea and Air, Glasgow, UK. June 14-18, 2010.
Moore, J.J.,
Kurz, R., Brun, K., Garcia-Hernandez, A. Experimental Evaluation of the
Transient Behavior of a Compressor Station during Emergency Shutdowns. ASME
Journal of Engineering for Gas Turbines and Power, Vol. 132, Issue 6. June 2010.
Moore, J.J.,
Kurz, R., Garcia-Hernandez, A.J., Brun, K. Experimental Evaluation of the
Transient Behavior of a Compressor Station During Emergency Shutdowns,
Proceedings of ASME Turbo Expo, Glasgow, UK. 2010.
Moore, J.J.,
Lerche, A.H., Allison, T.C., Ransom, D.L., and Lubell, D. Development of a
High Speed Gas Bearing Test Rig to Measure Rotordynamic Force Coefficients.
GT2010-23127, Proceedings of ASME Turbo Expo 2010: Power for Land, Sea and Air.
June 14-18, 2010. Glasgow, Scotland, UK.
Nored, M.G.,
E.L. Broerman, K. Brun. Gas Passage System Pulsation Analysis for Modern
Reciprocating Compressors. Presented at the 7th
Conference of the EFRC. October 21-22, 2010. Florence, Italy.
Nored, M.G.,
E.L. Broerman, K. Brun, G. Bourn. Low-Loss Pulsation Control. Presented
at the GMRC Gas Machinery Conference, Phoenix, AZ. October 4-6, 2010.
Nored, M.G.,
Brun, K., Callahan, T., and Kurz, R. Driver Options for Pipeline Compressors.
Proceedings at the GMRC Gas Machinery Conference, Phoenix, AZ. October 4-6,
2010.
Simmons,
H.R., and Allison, T. Impulse Testing and Blade Load Simulation Tools to
Estimate Cyclic Stress Life in Blades and Impellers. Proceedings of ASME
Turbo Expo, Paper GT2010-23745, Glasgow, UK. June 2010.
White, B.A.,
J. T. Gatewood, P.J. Pantermuehl, C.M. Scrivner. Vibration Control in
Reciprocating Compressor Systems. Short Course presented at the GMC (Gas
Machinery Conference), Phoenix, AZ.
October 4-6, 2010.
Wilcox, M.,
Ransom, D., Henry, M., Platt, J. Engine Distress Detection in Gas Turbines
with Electrostatic Sensors. GT2010-22349 Proceedings of ASME TurboExpo 2010,
Power for Land, Sea and Air. June 14-18, 2010. Glasgow, UK.
Wilcox, M.,
Ransom, D., Delgado-Garibay, H. Filter Failure During High Humidity
Conditions. GT2010-23641 Proceedings of ASME TurboExpo 2010, Power for Land,
Sea and Air, Glasgow, UK. June 14-18, 2010.
Wilcox, M.
Evaluating Intake Filters. Turbomachinery International, Vol. 51, No. 2, pg.
30-32. March/April 2010.
SwRI can offer you a full range of capabilities and experience in rotating
machinery technologies including becoming an extension of your engineering department. For
more information about rotating machinery technologies, or how you
can contract with Southwest Research Institute (SwRI), please contact
Jeff
Moore, Ph.D., at jmoore@swri.org
or (210) 522-5812.
machinery.swri.org
