|
|
|
5.1 |
Manual of Petroleum Measurement Standards Chapter 5--Metering;
Section1--General Considerations for Measurement by Meters |
|
6.6 |
Manual of Petroleum Measurement Standards Chapter 6--Metering
Assemblies; Section 6--Pipeline Metering Systems |
|
6.7 |
Manual of Petroleum Measurement Standards Chapter 6--Metering
Assemblies; Section 7--Metering Viscous Hydrocarbons |
|
8.1 |
Manual of Petroleum Measurement Standards Chapter 8--Sampling;
Section 1--Standard Practice for Manual Sampling of Petroleum and
Petroleum Products |
|
14.1 |
Manual of Petroleum Measurement Standards Chapter 14--Natural Gas
Fluids Measurement; Section 1--Collecting and Handling of Natural
Gas Samples for Custody Transfer |
|
22 |
Manual of Petroleum Measurement Standards - Chapter 22 - Testing
Protocak
Section 2 - Differential Pressure Flow Measurement Devices |
|
22.2 |
Manual of Petroleum Measurement Standards Chapter 22-Testing
Protocol; Section 2--Differential Pressure Flow Measurement Devices |
|
75
Recommended Practice |
Recommended Practice for Development of a Safety and Environmental
Management Program for Offshore Operations and Facilities |
|
510 |
Pressure Vessel Inspection Code: In-Service Inspection, Rating,
Repair, and Alteration |
|
520 (Part 1) |
Sizing, Selecting, and Installation of Pressure-Relieving Devices in
Refineries |
|
521 5th Edition incl. Errata |
Pressure-relieving and Depressuring Systems |
|
546 |
Brushless Synchronous Machines - 500 kVA and larger |
|
551 |
Process Measurement Instrumentation |
|
579 |
Fitness for Service |
|
579 Annex B1 |
Stress Analysis Overview for an FFS Assessment |
|
579-1 Annex D |
Compendium of Reference Stress Solutions for Crack-like Flaws |
|
610 |
Centrifugal Pumps for Petroleum, Heavy Duty Chemical, and Gas
Industry Services |
|
613 |
Special Purpose Gear Units for Petroleum, Chemical and Gas Industry
Services |
|
614 (2 copies) |
Lubrication, Shaft-Sealing, and Control-Oil Systems and Auxiliaries
for Petroleum, Chemical and Gas Industry Services |
|
616 |
Gas Turbines for the Petroleum, Chemical, and Gas Industry Services |
|
616 4th Ed. v.5 |
Gas Turbines for the Petroleum, Chemical, and Gas Industry Services |
|
616 5th Edition |
Gas Turbines for the Petroleum, Chemical, and Gas Industry Services |
|
617 |
Axial and Centrifugal Compressors and Expander-Compressors for
Petroleum, Chemical and Gas Industry Services |
|
618 |
Reciprocating Compressors for Petroleum, Chemical, and Gas Industry
Services |
|
618 5th Edition
Buddy is keeping it |
Reciprocating Compressors for Petroleum, Chemical, and Gas Industry
Services |
|
619 4th Edition |
Rotary-Type Positive-Displacement Compressors for Petroleum,
Petrochemical and Natural Gas Industries |
|
619 5th Edition |
Rotary-Type Positive-Displacement Compressors for Petroleum,
Petrochemical and Natural Gas Industries |
|
620 |
Design and Construction of Large, Welded, Low-Pressure Storage Tanks |
|
650 |
Welded Steel Tanks for Oil Storage |
|
670 |
Machinery Protection Systems |
|
671 (3rd Edition) |
Flexible Couplings |
|
672 |
Packaged, Integrally Geared Centrifugal Air Compressors for
Petroleum, Chemical, and Gas Industry Services |
|
674 - 2nd Edition |
Positive Displacement Pumps - Reciprocating |
|
674 - 3rd Edition |
Positive Displacement Pumps - Reciprocating |
|
677 |
General Purpose Gear Units for Petroleum, Chemical, and Gas Industry
Services |
|
684 |
Rotordynamic Tutorial: Lateral Critical Speeds, Unbalance Response,
Stability, Train Tortionals, and Rotor Balancing |
|
686 (2 copies) |
Machinery Installation and Installation Design |
|
688 (RP) |
Recommended Practice for Pulsation and Vibration Control in Positive
Displacement Machinery Systems for Petroleum, Pettrochemical, and
Natural Gas Industry Services. |
|
1104 |
Welding of Pipelines and Related Facilities |
|
1160 |
Managing System Integrity for Hazardous Liquid Pipelines |
|
2000 |
Venting Atmospheric and Low-Pressure Storage Tanks--Nonrefigerated
and Refrigerated |
|
2003 |
Protection against ignitions Arising our of Static, Lightning, and
Stray Currents |
|
2026 |
Safe Access/Egress Involving Floating Roofs of Storage Tanks in
Petroleum Service |
|
|
|
|
|
|
PTC 8.2-1990 (2 copies) |
Centrifugal Pumps Performance Test Codes |
|
PTC 10-1997 |
Performance Test Code on Compressor and Exhausters |
|
PTC 19-5-2004 |
Flow Measurement |
|
PTC 22-1997 |
Performance Test Code on Gas Turbines |
|
PTC 46-1996 |
Performance Test Code on Overall Plant Performance |
|
B16.9-2007 |
Factory made Wrought Buttwelding Fittings |
|
B16-2001 |
Factory made Wrought Buttwelding Fittings |
|
B16.11-2005 |
Forged Fittings, Socket Welding and Threaded |
|
B16.25-2007 |
Buttwelding Ends |
|
B16.47-2006 |
Large Diameter Steel Flanges |
|
B31.1-2001 |
Power Piping |
|
B31.3-2008 |
Process Piping |
|
B31.3-2008 |
Process Piping |
|
B31.3-2010 |
Process Piping |
|
B31.4-2006 |
Pipeline Transportation System for Liquid Hydrocarbons and other
liquids |
|
B31.8S-2004 |
|
|
B31.8-2010 |
Gas Transmission and Distribution Piping Systems |
|
B31.8.2007 |
Gas Transmission and Distrubution of Corroded Pipelines |
|
B31G-1991 |
Manual for Determining the Remaining Strength of Corroded Pipelines |
|
B31.8S-224 |
Managing System Integrity of Gas Pipelines |
|
PCC-2-2008 |
Repair of Pressure Equipment and Piping |
|
|
|
2314 (2 copies) |
Gas Turbines--Acceptance Tests |
|
2372 |
Mechanical Vibration of Machines with operating speeds from 10-200
rev/s Basis for specifying evaluation standards |
|
3977-1 |
Gas Turbines--Procurement--Part 1: General Introduction and
Definitions |
|
3977-3 |
Gas Turbines--Procurement--Part 3: Design Requirements |
|
3977-5 |
Gas Turbines--Procurement--Part 5: Application for Petroleum and
Natural Gas |
|
5167-2 (2 copies) |
Measurement of Fluid Flow by Means of Pressure Differential Devices
Inserted in Circular-Cross Section Conduits Running Full--Part 2:
Orifice Plates |
|
5389 |
Turbocompressors--Performance Test Code |
|
7919-4 |
Differential Devices inserted in circular - cross section conduits
running full |
|
13707 |
Petroleum and natural gas industries - Reciprocating compressors |
|
13709.2 |
Centrifugal Pumps for Petroleum, Petrochemical and Natural Gas
Industries |
|
14224 (2 copies) |
Petroleum and Natural Gas Industries--Collection and Exchange of
Reliability and Maintenance Data for Equipment |
|
17075 |
|
|
20815 (2 copies) |
Petroleum, Petrochemical and Natural Gas Industries--Production
Assurance and Reliability Management |
|
21789 / 192 |
Gas Turbine Applications--Safety |
|
10437 |
Petroleum, Petrochemical and Natural Gas industries - Steam Turbines
- Special Purposes |
|
10816-4 |
Mechanical Vibration--Evaluation of Machine Vibration by
Measurements on Non-Rotating Parts--Part 4: Gas Turbine Driven Sets
Excluding Aircraft Derivatives |
|
15663-1 |
Petroleum and Natural Gas Industries--Life Cycle Costing--Part 1:
Methodology |
|
14691 |
Petroleum, Petrochemical and Natural Gas Industries--Flexible
Couplings for Mechanical Power Transmission-General-Purpose
Applications |
|
7919-4 |
Mechanical Vibration of Non-Reciprocating Machines--Measurements on
Rotating Shafts and Evaluation Criteria--Part 4: Gas Turbine Sets |
|
|
|
|
|
|
303-2004 |
Recommended Practice for Auxiliary Devices for Rotating Electrical
Machines in Class I, Division 2 and Zone 2 Locations |
|
519-1992 |
Meeting IEEE 519-1992 Harmonic Limits Using HarmonicGuard Passive
Filters |
|
693 (Draft) |
Recommended Practice for Seismic Design of Substations |
|
841-2001 |
Standard for Petroleum and chemical Industry--Severe Duty Totally
Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors--Up to and
Including 370 kW |
|
1068-1996 |
Recommended Practice for the Repair and Rewinding of Motors for the
Petroleum and Chemical Industry |
|
|
|
|
|
|
MG 2-2001 (2 copies) |
Safety Standard and Guide for Selection, Installation, and Use of
Electric Motors and Generators |
|
MG 10-2001 |
Energy Management Guide for Selection and Use of Fixed Frequency
Medium AC Squirrel-Cage Polyphase Induction Motors |
|
MG 11-1977 |
Energy Management Guide for Selection and Use of Single-Phase Motors |
|
|
|
|
|
|
|
|
|
CEI/IEC 61000--4-6 |
Electromagnetic Compatibility (EMC)--Part 4-6: Testing and
Measurement Techniques--Immunity to Conducted Disturbances, Induced
by Radio-Frequency Fields |
|
CEI/IEC 45-1 |
Steam Turbines Part 1: Specifications |
|
CEI/IEC 3LL4 |
|
|
IEC 45 Speed |
Speed UTdrag |
|
|
|
|
|
|
Gas Properties Vol. I |
Selected Thermophysical Properties of Air, Ammonia, Carbon Dioxide,
Hydrogen, Nitrogen, Oxygen, Methane, Ethane, Propane, and Ethylene |
|
Gas Properties Vol. II |
Selected Thermophysical Properties of Acetylene, Carbon Monoxide,
Iso-Butane, N-Butane, Iso-Pentane, and N-Pentane |
|
ANSI B133.8-1997 |
|
|
ANSI/ISA-77.20 |
Fossil Fuel Power Plant Simulators--Functional Requirements |
|
ANSI/ASME B106.1M-1985 |
|
|
ANSI/API 521 |
See API 521 (Pressure-relieving and Depressuring Systems) |
|
ANSI/IHI 1.6-2000 |
Centrifugal Pump Tests |
|
NFPA 30 |
|
|
ACI 351.3R-04 |
|
|
ACI 351.2R-10 |
Report on Foundations for Static Equipment |
|
DEP 31.29.40.30 GEN |
|
|
ML-STD-81OE |
|
|
MIL-STD-167 |
|
|
PRC Project PR-15-175 |
Investigation of Pressure Losses in Compressor Station Yard Pipework |
|
Integrity Management |
Integrity Management Rule Frequently Asked Questions |
|
Field Test Guideline |
Guideline for Field Testing of Gas Turbine and Centrifugal
Compressor Performance |
|
PCC 2.08 |
Repair of Pressure Equiptment and Piping |
|
PCC-1-2000 |
Guidelines for Pressure Boundary Bolted flange joint Assembly |
|
ANSI/AGMA 9104-A06 |
Flexible Couplings – Mass Elastic Properties and Other
Characteristics (Metric Edition) |
|
ANSI/AGMA 9009-D02
(Revision of AGMA 510.03) |
Flexible Couplings – Nomenclature for Flexible Couplings |
|
ANSI/AGMA 9112-A04 |
Bores and Keyways for Flexible Couplings (Metric Series) |
|
ANSI/AGMA 9002-B04
(Revision of ANSI/AGMA 9002-A86) |
Bores and Keyways for Flexible Couplings (Inch Series) |
|
Vibration Institute |
Proceedings - National Technical Training Symposium and 33rd Annual
Meeting, Harrisburg, PA, June 2009 |
|
ASTM Designation: D 1929-96 |
Standard Test Method for Determining Ignition Temperature of
Plastics |
|
BS 4999: Part 50: 1978 |
Specification for General requirements for rotating electrical
machines.
Part 50. Mechanical performance - vibration |
|
AGA #XL1001 |
Classification of Locations for Electrical Installations in Gas
Utillity Areas - December 2010 |
|
ACI 351.2R-10 |
Report on Foundations for Static Equipment |
