Technical Presentations/Publications

For more information, write Communications.
 

Keywords:

2012

Generating Multiple Wavelengths, Simultaneously, in a Ti: Sapphire Ring Laser with a Ramp-Hold-Fire Seeding Technique. Moore, T.Z. and F.S. Anderson. Presented at the SPIE Exhibition, San Francisco, January 2012. 

2011

A Dual Wavelength Ti:sapphire Laser Using a Ramp-Hold-Fire Seeding Technique for Resonance Ionization of Rb87. Moore, T.Z. and F.S. Anderson. Presented at the Frontiers in Optics Conference, San Jose, Calif., October 2011. 

2010

Material Property Data for Fire Models. Dembsey, N.A., M.L. Janssens, and M.J. Hurley. Presented at the SFPE Engineering Technology Conference, New Orleans, Louisiana, October 2010. 

Pyrolysis Model Effects on Room/Corner Fire Growth Predictions. Janssens, M.L. Presented at the SFPE Engineering Technology Conference, New Orleans, Louisiana, October 2010. 

SFPE Guide for Obtaining Material Parameters for Input into Fire Models. Dembsey, N.A., M.J. Hurley, and M.L. Janssens. Presented at the National Institute of Standards and Technology Building and Fire Research Laboratory Seminar Series, Paper presented, Gaithersburg, Maryland, May 2010. 

2007

An Approach to Improve the Usefulness of Fire Resistance Test Data in Performance-Based Fire Design of Gypsum-Protected Steel-Stud Walls. Janssens, M.L. and B.L. Badders Jr. Presented at the Characterization Parameters of Gypsum Wallboard at Elevated Temperatures Workshop, National Institute of Standards and Technology, Gaithersburg, Maryland, September 2007. 

2006

Improving the Technical Basis of the Standard Fire Resistance Test for Performance-Based Fire Design of Building. Janssens, M.L. Presented at the Fire Protection Research Foundation Panel Meeting, December 5, Atlanta, Georgia, 2006. 

Modeling of Large-Scale Fire Test Performance of Glassfiber-Reinforced Composite. Huczek, J.P. and M.L. Janssens. Presented at the SAMPE 2006 Fall Technical Conference, Dallas, Texas, November 2006. 

2003

Fire Technology Today. Janssens, M.L. Presented at the Fire Risk and Hazard Assessment Research Application Symposium, July 9-11, Baltimore, Maryland, 2003. 

2000

Balanced Approach to the Fire Performance Evaluation of Interior Finish Materials. Janssens, M.L. and S.E. Dillon. Presented at and published in the 15th UJNR Joint Panel Meeting, March 1-7, National Institute of Standards and Technology, Gaithersburg, Maryland, Vol. 6588, pp. 407-411, 2000. 

Comparison of Combustion Characteristics of Various Crude Oils. Janssens, M.L., Y. Iwata, and H. Kosecki. Presented at and published in the 4th Asia-Oceania Symposium on Fire Science and Technology, May 24-26, Tokyo, Japan, pp. 453-462, 2000. 

Heat Release Rate. Janssens, M.L. Presented at and published in the Proceedings of the International Workshop on Measurement Needs for Fire Safety, April 4-6, National Institute of Standards and Technology, Gaithersburg, Maryland, Vol. 6527, pp. 186-206, 2000.