SwRI: Product Performance Testing for Cryogenic, Fugitive Emissions, Flow Coefficient, Pump Performance, and custom product evaluation services.

	Testing of products at both cryogenic and elevated-temperature environments is available at SwRI.

The Flow Component Testing Facilities (FCTF) at Southwest Research Institute (SwRI) have a number of different facilities that allow them to provide a variety of valve integrity testing services, such as:

• Cryogenic valve testing

• Valve fugitive emissions testing

• Seal tests

• Flow coefficient testing

• Erosion testing

• Pump performance evaluation

• Noise and vibration testing

Testing is conducted utilizing customized procedures as well as testing from standards including:

	This blast chamber can be internally heated to provide high pressure-high temperature conditions for testing.

• ANSI/ISA S75.02 (Flow coefficient testing)

• BS 6364 (Cryogenic valve testing)

• ISO 15848 (Fugitive emissions testing)

• SPE 77/312 (Fugitive emissions testing)

Specific test capabilities include:

• Nitrogen gas flows up to 230 MMSCFD and 3,000 psig

• Water flow rates up to 32,000 B/D (900 gpm)

• Sand slurry flow rates up to 10,000 B/D (300 gpm)

• Temperature testing from -320°F to 500°F

• Static pressure testing up to 20,000 psig with water or nitrogen

For more information about the product performance test capabilities at SwRI or how you can contract with SwRI, please contact Shane Siebenaler at ssiebenaler@swri.org or (210) 522-5758.