Mechanical Engineering Technical Papers Presented
For more information, contact Communications.
Allison, T.A., A.H. Lerche, J.J. Moore, and H.R. Simmons. Revisiting the Safe Diagram for Analysis of Mistuned Bladed Disks. Presented at the ASME International Gas Turbine Institute Turbo Expo, Copenhagen, Copenhagen, Denmark, June 2012.
Anderson Jr., C.E., I.S. Chocron, and R.P. Bigger. Constitutive Characterization and Simulations
of Penetration into Thick Glass Targets. Presented at the 26th International Conference
and Exposition on Advanced Ceramics and Composites, Daytona Beach, Fla., January 2012.
Anderson Jr., C.E. and I.S. Chocron. Applicability of Log-linear Stress/Strain-rate Response at Very High Strain Rates. Presented at the 7th Nordmetall Colloquium, Adorf/Erzgebirge, Germany, April 2012.
Anderson Jr., C.E. and I.S. Chocron. Constitutive Response of S-2 Glass Composite. Presented at the U.S. Army Research Laboratory (ARL) Ballistic Protection Technologies Workshop, Aberdeen Proving Ground, Md., May 2012.
Anderson Jr., C.E. and T.J. Holmquist. Computational Modeling of Failure for Hypervelocity Impacts into Glass Targets. Presented at the Hypervelocity Impact Symposium (HVIS 2012), Baltimore, May 2012.
Anderson, F.S., K.J. Nowicki, T.J. Whitaker, J. Mahoney, D.T. Young, G.P. Miller, J.H. Waite, M. Norman, J. Boyce, and J. Taylor. A Laser Desorption Resonance Ionization Mass Spectrometer for Rb-Sr Geochronology: Sr Isotope Results. Presented at the IEEE Aerospace Conference, Big Sky, Mont., March 2012.
Beissel, S.R. and T.J. Holmquist. Numerical Convergence of Ballistic Impacts with
Ceramic Targets. Presented at the 36th International Conference and Exposition on Advanced Ceramics and Composites, Daytona Beach, Fla., January 2012.
Bredbenner, T.L., R.L. Mason, L. Havill, E. Orwoll, and D.P. Nicolella. Investigating Fracture Risk Classifiers Based on Statistical Shape and Density Modeling and the MrOS Data Set. Presented at the 2012 Orthopaedic Research Society (ORS) Annual Meeting, San Francisco, February 2012.
Broerman III, E.L., J.T. Gatewood, and A. Rivera Jr. Flow-vibration in Gas Piping Systems: Identification, Mitigation, and Avoidance by Design. Presented at the 2012 Gas Processor Association Convention, New Orleans, April 2012.
Brun, K., M.G. Nored, and R. Kurz. Analysis of Solid Particle Surface Impact Behavior in Turbomachines to Assess Blade Erosion and Fouling. Presented at the 41st Turbomachinery Symposium, Houston, September 2012.
Brun, K. and M.G. Nored. Valve Performance and Life of Reciprocating Compressors. Presented at the 41st Turbomachinery Symposium, Houston, September 2012.
Burnside, O.H. USAF ASIP Initiative for the T-37 and T-38. Presented at the 2012 Worldwide Review, Ogden, Utah, September 2012.
Chan, K.S., M.P. Enright, J.P. Moody, B. Hocking, and S. Fitch. Life Prediction for Turbopropulsion Systems Under Dwell Fatigue Conditions. Presented at and published in the Aeroengine Technical Congress, Copenhagen, Denmark, June 2012.
Cheng, X.C., S.A. Desai, G.E. Gutierrez, S.T. Wellinghoff, G. Rossini, and H. Yu. Biological Performance of Biodegradable 3D Coated Mg Alloy Bone Scaffold. Presented at the Corrosion Conference, Salt Lake City, March 2012.
Cheng, X.C., T.L. Bredbenner, and S.A. Desai. Wrapped and Coated Cylindrical Mg Alloy Successfully Repaired Critical Size Bone Defect. Presented at the Orthopaedic Research Society (ORS) Meeting, San Francisco, February 2012.
Chirathadam, T. and B.A. White. Dynamic Analysis of Process Equipment Foundations. Presented at the Gas Machinery Conference, Austin, Texas, October 2012.
Chocron, I.S., C.E. Anderson Jr., A.E. Nicholls, and K.A. Dannemann. Compression Tests of Boron Carbide and Silicon Carbide Under Moderate Confinement. Presented at the 36th International Conference and Exposition
on Advanced Ceramics and Composites, Daytona Beach, Fla., January 2012.
Chocron, I.S., C.E. Anderson Jr., and S.A. Mullin. Testing Composites at High Rates: Results, Simulations and Challenges. Presented at the 2012 Aerospace Structural Impact Dynamics International Conference, National Institute for Aviation Research, Wichita, Kansas, November 2012.
Chocron, I.S., J.D. Walker, U. Heisserer, and H. van Der Werff. Some Original Material and Ballistic Experiments on HB80 Dyneema. Presented at the DSM Headquarters, Sittard, Netherlands, August 2012.
Choudary, A., H. Coan, D.P. Nicolella, J. Curran, M. Carless, S. Kumar, J. Kent, L. Almasy, H. Goring, J. Blangero, M. Mahaney, and L. Havill. Genome-wide Transcriptional Profiling Implicates
Inflammatory Genes LRP8, IL10RA, LDLR, and PLA2G2 in Osteoarthritis. Presented at the 2012 ORS Annual Meeting, San Francisco, February 2012.
Coan, H., A. Choudary, D.P. Nicolella, T. Dyer, J. Curran, M. Carless, K. Kumar, J. Kent Jr., L. Almasy, J. Goring, J. Blangero, M. Mahaney, and L. Havill. GWAS of Osteoarthritis Biomarkers Serum Hyaluronic Acid and Cartilage Oligomeric
Matrix Protein Implicates FOXN4, ETV6, KIAA1217, ZNF521, and CSGALNACTI. Presented at the 2012 Orthopaedic Research Society (ORS) Annual Meeting, San Francisco, February 2012.
Dannemann, K.A., S.W. Smith, I.S. Chocron, and A.E. Nicholls. High Strain Rate Effects on Fracture of Niobium C-103. Presented at the Materials Science and Technology (MS&T) 2012 Conference, Pittsburgh, October 2012.
Dante, J.F. Effect of Relative Humidity on Time of Wetness and Corrosion. Presented at the NACE Corrosion Conference, Salt Lake City, March 2012.
Dante, J.F. Implication of Atmospheric Wetness Levels on Corrosion at a Coating Defect During Accelerated Testing. Presented at the ASETS Defense 2012, San Diego, August 2012.
Dante, J.F. Real-time Measure of Corrosion Under Differing Relative Humidity Conditions. Presented at the Materials Science and Technology (MS&T) 2012 Conference, Pittsburgh, October 2012.
Enright, M.P., J.P. Moody, R. Chandra, and A. Pentz. Influence of Mission Variability on Fracture Risk of Gas Turbine Engine Components. Presented at the 57th ASME International Gas Turbine and Aeroengine Technical Congress, Copenhagen, Denmark, June 2012.
Enright, M.P., R.C. McClung, W. Liang, Y.-D. Lee, J.P. Moody, and S. Fitch. A Tool for Probabilistic Damage Tolerance of Hole Features in Turbine Engine Rotors. Presented at the 57th ASME International Gas Turbine and Aeroengine Technical Congress, Copenhagen, Denmark, June 2012.
Evans, N., D. Arnett, T.C. Allison, and N.W. Poerner. Practical Application of AIV Analysis Methods for Screening, Qualification and Redesign of Complex Piping Systems. Presented at the InterNoise 2012, New York, August 2012.
Ferren, J.L. Hygroscopic and Gaseous Contaminants Testing. Presented at the 2012 NEBS Conference: Common Requirements for Uncommon Networks, Las Vegas, October 2012.
Fisher, J.L., A.C. Cobb, and C.E. Duffer. Magnetostrictive Sensors for Guided Wave Inspection of Hidden Areas of Plate and Piping. Presented at the 9th International Conference on NDE in Relation to Structural Integrity for Nuclear and Pressurized Componentsb, Bellevue, Wash., May 2012.
Francis, W.L., D.P. Nicolella, J.M. Mcfarland, P. Whitley, and B. Shender. Development and Implementation of a Fast Running Injury Prediction Tool for the Cervical Spine. Presented at the 83rd Annual Scientific Meeting of the Aerospace Medical Association, Atlanta, May 2012.
Freitas, C.J., J.T. Mathis, N.L. Scott, and R.P. Bigger. Dynamic Measurement of Behind Helmet Blunt Trauma with a Human Head Surrogate.”. Presented at the PASS 2012 Personal Armour Systems Symposium, Nuremberg-Furth, Germany, September 2012.
Freitas, C.J., R.P. Bigger, N.L. Scott, and V. LaSala. Composite Materials Dynamic Back Face Deflection Characteristics. Presented at the PASS 2012 Personal Armour Systems Symposium, Nuremberg-Furth, Germany, September 2012.
Freitas, C.J. Application of V&V 20 to the Simulation of Propagating Blast Loads in Multi-compartment Structures. Presented at the ASME Verification and Validation Symposium, Las Vegas, May 2012.
Freitas, C.J. WPS — A Wellbore Performance Simulator. Presented at the Baker Hughes Modeling and Simulations Technology Symposium, Houston, October 2012.
Garcia-Hernandez, A.J. and K. Brun. Natural Gas Pipeline System Optimization. Presented at the Hidrocarburos del Congreso Internacional, Guadalajara-Jalisco, Mexico, February 2012.
Garcia-Hernandez, A.J. and S.P. Siebenaler. Acoustic Leak Detection Technology Assessment. Presented at the 2012 ASME International Pipeline Conference, Calgary, Canada, September 2012.
Garcia-Hernandez, A.J., T.S. Tavares, and M.A. Wilcox. Dynamic Pipeline System Simulation of Multi-stage Compressor Trains. Presented at the ASME International Gas Turbine Institute Turbo Expo, Copenhagen, Denmark, June 2012.
Gatewood, J.T., J.J. Moore, M.G. Nored, K. Brun, and V. Iyengar. The Texas Cryogenic Oxy-Fuel Cycle (TCO): A Novel Approach to Power Generation with CO2 Options. Presented at the 2012 ASME Turbo Expo, Copenhagen, June 2012.
Grosch, D.J. Armored Vehicle Fuel Tank Study. Presented at the 63rd Meeting of the Aeroballistics Range Association, Brussels, Belgium, October 2012.
Henden, A.A., T.A. Smith, S.E. Levine, and D.C. Terrell. The American Association of Variable Star Observers (AAVSO) Photometric All-sky Survey Completes the Sky. Presented at the American Astronomical Society Meeting, Anchorage, Alaska, June 2012.
Hollingsworth, J.R., T.S. Tavares, N.W. Poerner, and S.M. James. Machinery Performance Testing and Troubleshooting. Presented at the ASME International Gas Turbine Institute and SwRI Training Week, San Antonio, March 2012.
Holmquist, T.J. and C.L. Randow. Modeling the Ballistic Response of the 7.62-mm M993 Projectile. Presented at the 2nd ARL Research in Ballistic Technologies Workshop, Aberdeen Proving Ground, Md., May 2012.
Holmquist, T.J. and D.J. Grove. Modeling Shaped-charge Jets into Glass Targets Including Comparisons to Experimental Data. Presented at the 2nd ARL Research in Ballistic Technologies Workshop, Aberdeen Proving Ground, Md., May 2012.
Johnson, G.R., S.R. Beissel, and C.A. Gerlach. A Combined Particle-element Method for High-velocity Impact Computations. Presented at the 12th Hypervelocity Impact Symposium, Baltimore, September 2012.
Kim, B.S., W. Choi, G. Musgrove, F. Fierro, and D.L. Ransom. Gas Turbine Blade Stress and Temperature Sensitivity to Turbine Inlet Profile and Cooling Flow. Presented at the ASME International Gas Turbine Institute Turbo Expo, Copenhagen, Denmark, June 2012.
Kulhanek, C.D., S.M. James, and J.R. Hollingsworth. Stiffening Effect of Motor Core Webs for Torsional Rotordynamics. Presented at the ASME International Gas Turbine Institute Turbo Expo, Copenhagen, Denmark, June 2012.
Kurz, R., C. Meher-Homji, K. Brun, and J.J. Moore. Gas Turbine Performance and Maintenance. Presented at the 41st Turbomachinery Symposium, Houston, September 2012.
Laiche, E.C. and N. Amir. Tube Inspection Using Acoustic Pulse Reflectometry — A Detailed Evaluation. Presented at the ASNT Spring 2012 Conference, Dallas, March 2012.
Least, B., S. Greci, R. Burkey, A. Ufford, and A. Wileman. Autonomous ICD Single Phase Testing. Presented at the 2012 Society of Petroleum Engineers Annual Technical Conference and Exhibition, San Antonio, October 2012.
Lerche, A.H., J.J. Moore, J. Hardin, and N. White. Dynamic Stress Prediction in Centrifugal Compressor Blades Using Fluid Structure Interaction. Presented at the ASME International Gas Turbine Institute Turbo Expo, Copenhagen, Denmark, June 2012.
McClung, R.C., M.P. Enright, W. Liang, J.P. Moody, W. Wu, R. Shankar, W. Luo, J. Oh, and S. Fitch. Integration of Manufacturing Process Simulation with Probabilistic Damage Tolerance Analysis of Aircraft Engine Components. 14th AIAA Non-Deterministic Approaches Conference, Honolulu, April 2012.
McClung, R.C., M.P. Enright, W. Liang, K.S. Chan, J.P. Moody, W.T. Wu, R. Shankar, W. Luo, J. Oh, and S. Fitch. Integration of Manufacturing Process Simulation with Probabilistic Damage Tolerance Analysis of Aircraft Engine Components. Presented at the 53rd AIAA/ASME/ASCE/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, April 2012.
McClung, R.C. and V. Bhamidipati. An Investigation of Small-crack Effects in Various Aircraft Engine Rotor Materials. Presented at the 2012 Propulsion-Safety and Affordable Readiness (P-SAR) Conference, Jacksonville, Fla., March 2012.
McClung, R.C., Y.-D. Lee, K.S. Chan, M.P. Enright, and S.K. Fitch. Methods for Temperature Effects in Probabilistic Damage Tolerance Analysis. Presented at the 2012 Propulsion-Safety and Affordable Readiness (P-SAR) Conference, Jacksonville, Fla., March 2012.
McClung, R.C., Y.-D. Lee, M.P. Enright, and W. Liang. New Methods for Automated Fatigue Crack Growth and Reliability Analysis. Presented at the ASME International Gas Turbine Institute Turbo Expo, Copenhagen, Denmark, June 2012.
McClung, R.C., Y.-D. Lee, M.P. Enright, and W. Liang. New Methods for Automated Fatigue Crack Growth and Reliability Analysis. Presented at the 57th ASME International Gas Turbine and Aeroengine Technical Congress, Copenhagen, June 2012.
McClung, R.C. Towards a V&V Hierarchy for Fatigue Crack Growth Lifetime Analysis. Presented at the ASTM Workshop on Verification and Validation of Life Prediction Software, Phoenix, May 2012.
Mcfarland, J.M., G. Musgrove, S.Y. Chang, and D.L. Ransom. Calibration of Gas Turbine Blade Temperature Predictions Using Surrogate Models. Presented at the ASME International Gas Turbine Institute Turbo Expo, Copenhagen, Denmark, June 2012.
Moore, J.J., A.H. Lerche, T.C. Allison, and B.S. Moreland. Development of an Internally Cooled Centrifugal Compressor for Carbon Capture and Storage Applications. Presented at the ASME International Gas Turbine Institute Turbo Expo, Copenhagen, Denmark, June 2012.
Mullin, S.A., D.J. Grosch, J.T. Mathis, and R.P. Bigger. Methodology and Experience Launching Birds, Ice, and Many Different Foreign Objects to High Velocity, and Monitoring Target Response. Presented at the 2012 Aerospace Structural Impact Dynamics International Conference, National Institute for Aviation Research, Wichita, Kansas, November 2012.
Musgrove, G., A.M. Rimpel, and J.C. Wilkes. Tutorial: Applications of Supercritical CO2 Power Cycles — Fundamentals and Design Considerations. Presented at the 57th ASME International Gas Turbine and Aeroengine Congress and Exposition, Copenhagen, Denmark, June 2012.
Musgrove, G., K.A. Thole, E. Grover, and J. Barker. Performance Measurements of a Unique Louver Particle Separator for Gas Turbine Engines. Presented at the ASME International Gas Turbine Institute Turbo Expo, Copenhagen, Denmark, June 2012.
Nicolella, D.P., T.D. Eliason, W.L. Francis, and B.J. Bichon. Dynamic Finite Element Modeling of Knee Mechanics. Presented at the 2012 Orthopaedic Research Society (ORS) Annual Meeting, San Francisco, February 2012.
Pogorelov, N.V., S.N. Borovikov, L.A. Burlaga, R.W. Ebert, B.V. Jackson, T.K. Kim, I.A. Kryukov, S.T. Suess, H. Yu, and G.P. Zank. Unsteady Processes in the Vicinity of the Heliopause. Presented at the 13th International Solar Wind (Solar Wind 13) Conference, Kona, Hawaii, June 2012.
Rimpel, A.M., G. Musgrove, and J.C. Wilkes. Supercritical CO2 Power Cycles. Presented at the ASME International Gas Turbine Institute Turbo Expo, Copenhagen, Denmark, June 2012.
Rimpel, A.M., J.J. Moore, J. Grieco, P. Shy, J. Klein, and J. Brady. Rotordynamics of a 105,000 rpm Oil-free Compressor-expander for Subsurface Natural Gas Compression and Reinjection. Presented at the ASME International Gas Turbine Institute Turbo Expo, Copenhagen, Denmark, June 2012.
Rimpel, A.M., T.C. Allison, J.J. Moore, J. Grieco, P. Shy, J. Klein, and J. Brady. Open-loop Aerodynamic Performance Testing of a 105,000 rpm Oil-free Compressor-expander for Subsurface Natural Gas Compression and Reinjection. Presented at the ASME International Gas Turbine Institute Turbo Expo, Copenhagen, Denmark, June 2012.
Schrader, K.H. Role of Flight Data Recording in ASIP. Presented at the 2012 Worldwide Review, Ogden, Utah, September 2012.
Shukla, P.K., T. Mintz, B. Dasgupta, and J.L. Fisher. Using Local Electrochemical Impedance Spectroscopy to Detect Coating Defects on Buried Pipelines. Presented at the CORROSION 2012 Conference, Salt Lake City, March 2012.
Siebenaler, S.P. and G. Walter. Detection of Small Leaks in Liquid Pipelines Utilizing Distributed Temperature Sensing. Presented at the 2012 ASME International Pipeline Conference, Calgary, Alberta, Canada, September 2012.
Siebenaler, S.P. Challenges for R&D of Leak Detection Systems. Presented at the Improving Pipeline Leak Detection Effectiveness
— Department of Transportation Public Forum, Washington, D.C., March 2012.
Siebenaler, S.P. Detection of Small Leaks in Liquid Pipelines. Presented at the 2012 PRCI Research Exchange, Phoenix, February 2012.
Siebenaler, S.P. External Leak Detection. Presented at the 2012 ASME International Pipeline Conference, Calgary, Canada, September 2012.
Simmons, H.R., V.S. Iyengar, and T.C. Allison. Effects of Stator Flow Distortion on Rotating Blade Endurance, Part 2 — Stress Analysis and Failure Criteria. Presented at the ASME International Gas Turbine Institute Turbo Expo, Copenhagen, Denmark, June 2012.
Tavares, T.S. and J.T. Gatewood. Tutorial: Gas Turbine and Centrifugal Compressor Performance Testing in the Field. Presented at the 40th Eastern Gas Compression Roundtable, Moon Township, Penn., May 2012.
Tavares, T.S., M.A. Wilcox, and J.T. Gatewood. Performance Assessment of Centrifugal and Reciprocating Compressor Units from Field Testing. Presented at the 2012 Gas Machinery Conference, Austin, Texas, October 2012.
Tavares, T.S. Testing Capabilities in Support of Modeling and Simulation. Presented at the Schlumberger Modeling and Simulation Workshop, Sugarland, Texas, June 2012.
Trillo, E.A., J.F. Dante, and C.H. Popelar. Flow Assisted Corrosion Effects on Nitinol for Biomedical
Applications. Presented at the NACE Corrosion Conference, Salt Lake City, March 2012.
Vinogradov, S.A., G.M. Light, H. Kwun, and D.L. Wagar. MsS® Guided Wave Probe and Coupling Approach for Reliable Long-term Structural Health Monitoring of Pipelines. Presented at the ASNT Fall 2012 Conference, Orlando, Florida, October 2012.
Vinogradov, S.A., H. Kwun, G.M. Light, and D.L. Wagar. Applications of MsS Probes for Guided Wave Testing of Components. Presented at the ASNT Spring 2012 Conference, Dallas, March 2012.
Walker, J.D., D.J. Grosch, I.S. Chocron, K.A. Dannemann, R.P. Bigger, T.Z. Moore, and T.T. Kirchdoerfer. A New Technique for Monitoring Inhomogeneous Deformation During Flyer Plate Impact. Presented at the SEM XII International Congress and Exposition on Experimental and Applied Mechanics, Costa Mesa, Calif., June 2012.
Wawrzynek, P., R.C. McClung, Y.-D. Lee, and B. Carter. A Three-dimensional Crack Growth Tool for Probabilistic Fatigue Life Predictions. Presented at the 2012 Propulsion – Safety and Affordable Readiness (P-SAR)
Conference, Jacksonville, Fla., March 2012.
Wickert, M., T. Behner, A. Heine, C.E. Anderson Jr., and D.W. Templeton Jr. Ballistic Response of Brittle Materials: Review of a Successful DEU-USA Cooperation. Presented at the Land Combat Lethality and Survivability Workshop, Aberdeen Proving Ground, Aberdeen, Maryland, May 2012.
Wilcox, M.A., R. Kurz, N.W. Poerner, and K. Brun. Development of Test Procedure for Quantifying the Effects of Salt and Water on Gas Turbine Inlet Filtration. Presented at the 2012 ASME Turbo Expo, Copenhagen, June 2012.
Wilkes, J.C. and D. Childs. Improving Tilting-pad Journal Bearing Predictions: Part I — Model Development and Impact of Rotor Excited Versus Bearing Excited Impedance Coefficients. Presented at the ASME International Gas Turbine Institute Turbo Expo, Copenhagen, Denmark, June 2012.
Wilkes, J.C. and D. Childs. Tilting Pad Journal Bearings — A Discussion on Stability Calculation, Frequency Dependence, and Pad and Pivot Flexibility. Presented at the ASME International Gas Turbine Institute Turbo Expo, Copenhagen, Denmark, June 2012.
Wilkes, J.C. A General Model for Two-point Contact Dry-friction Whip and Whirl. Presented at the ASME International Gas Turbine Institute Turbo Expo, Copenhagen, Denmark, June 2012.
Yang, L., K.T. Chiang, H. Yu, R.T. Pabalan, and L. Ibarra. Studies of Threshold Chloride Levels for Localized Carbon Steel Corrosion in Simulated
Concrete Pore Solutions Using Coupled Multielectrode Array Sensors. Presented at the Corrosion 2012 Conference, Salt Lake City, March 2012.
▲ RETURN TO TOP
