| A-10 Platform Systems Engineering |
 |
| Engineering assistance for integration of new radios and data links on the A-10 platform, such as: Situation awareness data link (SADL), ARC-210, Improved data modem (IDM), Support equipment updates. |
|
| |
ASD Administration |
|
| AboveGround Fuel Storage Tanks |
|
| Testing of above ground fuel storage tanks in accordance with NFPA and Uniform Fire code requirements. |
|
| |
Fire Research and Testing Services for the Transportation Industry |
| |
Services for the Aboveground Storage Tank Industry |
| |
Engineering and Research Section |
|
| Aboveground Storage Tanks (Listing and Labeling) |
|
| Listing and labeling of aboveground storage tanks for flammable liquids. |
|
| |
Listing, Labeling & Follow-Up Inspections |
|
| Abrasion/Wear Tests--Biomaterials |
|
| (1) Pin-on-disk friction and wear testing of orthopedic materials; (2) hip and knee simulator studies; (3) design and construction of customized friction and wear test rigs. |
|
| |
Applied Biomaterials |
| |
Surface Engineering &Materials Chemistry |
| |
Reliability and Materials Integrity |
|
| AC-228 |
|
| Analysis Method for Actinium-228 |
|
| |
Vice President's Office |
|
| Accelerated Environmental Testing |
|
| Covers accelerated UV, salt corrosion, thermal and dynamic environments |
|
| |
Electromagnetic Compatibility |
| |
Telecommunications Equipment Evaluation |
| |
Structural Engineering |
| |
Structural Dynamics & Product Assurance |
|
| Accelerated Exhaust Injector Coking |
| |
Engine & Vehicle R&D |
|
| Accelerometer Design |
| |
Applied Physics |
| |
Electronics Systems and Robotics Department |
| |
Engineering Applications & Systems Development |
|
| Accident Investigation--Explosions |
| |
Engineering & Research |
| |
Fire and Explosion Testing |
| |
Science & Analysis |
| |
Explosive Hazards Evaluations |
| |
Ballistics & Explosives Engineering |
|
| Acoustic & Noise Control |
| |
Structural Dynamics and Acoustics |
| |
Electronics Systems & Robotics |
| |
Fluids & Machinery Engineering |
| |
Structural Dynamics and Noise Control |
| |
Structural Engineering |
| |
Structural Dynamics & Product Assurance |
|
| Acoustic Design--Audio |
|
| Design for concert halls, theaters, etc. |
|
| |
Software Development |
|
| Acoustic Design--Compressor/Pumps |
|
| Reciprocating compressors and pumps create pressure pulsations in the flow stream. These pulsations can cause the compressor or pump and the attached piping system to shake or vibrate, which can cause system components to eventually crack or break due to metal fatigue. These pulsations may also reduce overall system performance. "Acoustic design" refers to the analysis of these pressure pulsations in compressors and pump installations. Based on the analysis, we can design a filtration system that will eliminate the pressure pulsations, thus maximizing system performance and minimizing the likelihood of catastrophic cracks or breaks in the system. |
|
| |
Materials Engineering |
| |
Fluids & Machinery Engineering |
| |
Fluid Machinery Systems |
|
| Acoustic Design-Compressors/Pumps |
| |
Materials Engineering |
| |
Fluids & Machinery Engineering |
| |
Machinery Vibration Services |
| |
Fluid Machinery Systems |
| |
Fluid Systems and Engineering |
| |
Mechanics & Materials |
|
| Acoustic Emissions |
| |
Assuring the Safety of Natural Gas Vehicles |
| |
Communications Engineering |
| |
Applied Physics |
| |
Sensor Systems & NDE Tech |
| |
Fluid Dynamics |
|
| Acoustic Fatigue |
| |
Fluids & Machinery Engineering |
|
| Acoustic Lens Design |
|
| Acoustic Lens Design |
|
| |
Sensor Systems & Nondestructive Evaluation (NDE) Technology |
|
| Active Safety Systems |
| |
Intelligent Vehicle Systems |
|
| Active Suspension |
| |
Hydraulic Fluid Power Technology |
| |
Vehicle Components |
| |
Powertrain Controls |
| |
Hydraulic Systems Design and Development |
|
| AAutomotive active suspension control system design, control software development, component and vehicle testing. |
|
| |
Powertrain Controls |
| |
Advanced Vehicle Technology |
|
| Active Vehicle Safety Systems |
| |
Intelligent Vehicle Systems |
|
| AActive vehicle safety system for commercial, passenger, and military vehicles. Autonomous, semi-autonomous, ground vehicles and robots. High-speed vehicle control, vision(camera)-based, safety systems and software |
|
| |
Powertrain Controls |
|
| Active X |
| |
Systems & Sensors |
| |
Communications and Embedded Systems Department |
| |
Project & Operations Support |
| |
Ballistics & Explosives Engineering |
|
| Ada Software |
|
| Ada software is software written in the Ada programming language. |
|
| |
Emerging Training and Performance Technologies Department |
| |
Learning Sciences & Systems |
| |
Modeling & Simulation |
| |
Systems & Sensors |
| |
Intelligent Systems |
| |
Surveillance & Geolocation |
| |
Fluids & Machinery Engineering |
| |
Structural Dynamics & Product Assurance |
|
| Adaptive Arrays |
|
| Adaptive antenna arrays automatically respond to a changing signal
environment, rendering the operation of such systems more flexible and
reliable, and provide improved reception performance that would be difficult
to achieve in any other way. |
|
| |
Office of the Vice President |
| |
Office of the Director |
|
| Adaptive Systems |
|
| A system that monitors its own performance and has the capability to improve its performance or alter its function, locally and/or cooperatively in the case of a distributed network system, in response to various events such as a changing operational environment or a partial system failure. |
|
| |
Powertrain Controls |
| |
Automation & Data Systems |
| |
Communications & Embedded Systems |
|
| ADAS |
| |
Intelligent Vehicle Systems |
|
| Additive Analysis--Fuels & Lubricants |
| |
Chemical Engineering |
| |
Chemical Defense |
| |
Fuels, Lubricants & Fluids Applications |
| |
Engine, Emissions & Vehicle Research |
| |
Chemistry Lab |
| |
Fuel Lab Prof Staff |
| |
Fuel Survey Projects |
| |
Lube Prof Administrative Staff |
|
| Emmissions, Energy, Efficiency testing. |
|
| |
Chemistry Lab |
|
| Adhesives/Sealants |
| |
Nanotechnology |
| |
Electromechanical & Optical Systems |
|
| adsorbtive and absorbtive materials |
| |
Materials and Bioengineering |
|
| Advanced Distributed Learning |
| |
Employee Development Office |
| |
Powertrain Controls |
| |
Autonomous Systems & Controls |
|
| Advanced Driver Assistance Systems |
| |
Intelligent Vehicle Systems |
|
| Advanced Metering Infrastructure |
|
| Smart Energy Grid is evolving from its roots in Automated Meter Reading (AMR) and Advanced Metering Infrastructure (AMI) into an Internet-like, information infrastructure providing support for: Demand-response management of consumer power usage; E-commerce for enhancing customer relationships; Dispatchable power generation for solar panels, and wind turbines; and Location-independent, point-of-sale transactional services for plug-in electric vehicles. |
|
| |
Embedded & Applications Security |
| |
Tactical Networks & Communication |
|
| Advanced System Development |
| |
Powertrain Control Technology |
| |
Advanced Vehicle Technology |
| |
Advanced Vehicle Technology |
|
| Advanced Traffic Management Systems (ATMS) |
|
| SwRI integrates new technologies and equipment into existing ATMS and Traffic Management Centers (TMC). SwRI has implemented and integrated various Intelligent Transportations System (ITS) technologies. Subsystems include: Automated vehicle identification (AVI), Automated vehicle location (AVL), Center-to-center (C2C), Closed-circuit television (CCTV), Data fusion, Data warehouse, Dynamic message signs (DMS), Express lanes (variable pricing), 511 information disseminatio, Highway advisory radio, Incident detection and response plan generation, License plate recognition, Maintenance databases, Traffic conditions detection, Travel time, Variable speed limit, Video switching, and Weather sensor/data integration. Traffic Management includes: Incident management, Automated incident detection, 911 incident integration, Automatic notification (paging). User Interfaces include: Real-time traffic condition displays, Travel times, Web-based user interfaces and ATMS web sites, Advanced traveler information systems (ATIS), and 511 traffic conditions interface. Other Technologies include: Wireless communications networks for video and data, Support and migration of legacy equipment, ATMS equipment maintenance management, Data archiving and warehousing, Data mining and visualization, National standards and ITS architecture, System logging, and System status, health, and maintenance. |
|
| |
Intelligent Vehicle Systems |
| |
Intelligent Systems |
| |
Decision Support Technologies |
|
| Advanced Vehicle System Development |
|
| Advanced vehicle research and development, including: vehicle system design, math-based vehicle research, laboratory-based vehicle research, modeling and simulation, vehicle prototype development, plug-in hybrid vehicle research, hybrid electric vehicle research, fuel cell applications, powertrain engineering, and powertrain testing. |
|
| |
Intelligent Vehicle Systems |
| |
Powertrain Controls |
|
| Advanced Vehicle Technology |
|
| Including: Modeling and simulation, Technical design, Evaluation studies, Prototype development, and Vehicle component testing. Flexibility to handle projects focused on hybrid, plug-in, electric and fuel cell applications as well as other emerging technologies. |
|
| |
Intelligent Vehicle Systems |
| |
Powertrain Controls |
|
| Aerodynamic and Ballistic Systems |
|
| Modeling and Simulation. Software languages include: Ada, C/C++, MATLAB, Simulink, Java. |
|
| |
ASD Administration |
|
| Aerospace Materials Testing |
|
| Testing of aerospace materials |
|
| |
Materials and Structures |
| |
Material Development |
| |
Materials and Bioengineering |
| |
Electromechanical & Optical Systems |
| |
Materials Engineering |
|
| Aerospace Networks and Communications |
|
| Networking technology for airborne and space platforms as well as research and development in reconfigurable communications architectures for space applications.
|
|
| |
Advanced Instruments & Telemetry Systems |
|
| Aerospace Systems Reliability |
| |
Structural Engineering |
|
| AFNOR NFE 48-690 |
|
| N690 Dry. Filterability - Mineral Oils (Dry). |
|
| |
Lube Prof Administrative Staff |
|
| AFNOR NFE 48-691 |
|
| N691 Wet. Filterability - Mineral Oils (Wet). |
|
| |
Lube Prof Administrative Staff |
|
| Aftertreatment |
|
| The Engine and Emissions Research Department in the Engine, Emissions and Vehicle Research Division offers a wide variety of services to measure and control exhaust emissions produced by vehicles and engines. Services are interrelated and are typically combined to complete projects. All proposals are tailored to meet clients' individual needs. |
|
| |
Operations |
| |
Emissions R&D |
| |
Aftertreatment |
|
| Air Bag Testing (EMC Testing) |
| |
EMCS |
| |
Electromechanical & Optical Systems |
| |
Fluids & Machinery Engineering |
|
| Air Brake Testing |
| |
Engine, Emissions & Vehicle Research |
| |
Engine Design & Analysis |
| |
Modeling & Simulation |
| |
Electromechanical & Optical Systems |
|
| Air Conditioning |
| |
Fluid Dynamics |
| |
Fluid Dynamics & Multiphase Flow |
|
| Air Conditioning Refrigerant-Automotive |
|
| Automotive A/C system in vehicle durability testing. Mileage accumulation to evaluate compressor and entire system longevity. |
|
| |
Automotive Fleet Testing |
| |
Fuel & Fleet |
| |
Lube Prof Administrative Staff |
|
| Air Filter Test Stands |
|
| Design and build Air Filter Test Stands |
|
| |
Filtration & Fine Particle Technology |
|
| Air Filters--Automotive |
|
| Test air filters and air cleaning systems for automotive and non-automotive applications. |
|
| |
Vehicle Components |
| |
Filtration & Fine Particle Technology |
|
| Air Sampling Devices |
| |
Environmental Engineering & Assessment |
| |
Chemical Engineering |
| |
Bioanalytical Chemistry & Environmental Health |
| |
Organic |
| |
Chemical Defense |
| |
Environmental Engineering & Monitoring |
| |
Electromechanical & Optical Systems |
|
| Air Sampling/Survey/Investigation |
|
| Environmental monitoring and assessment |
|
| |
Chemistry and Chemical Engineering Division |
| |
Vice President's Office |
| |
Environmental Engineering & Monitoring |
|
| Air Traffic Control Training |
| |
Emerging Training and Performance Technologies Department |
| |
Immersive Technologies |
| |
Learning Sciences & Systems |
|
| Airborne Warning Control Systems |
|
| Simulation and training systems associated with command Control Communications Computer Intelligence Surveillance and Reconnaissance (C4ISR) training. Supports the USAF Distributed Mission Operations (DMO) training program and incorporates live, virtual and constructive simulation training for AWACS mission crew. Includes digital communication simulation, tactical datalinks simulation such as Link16 and Link 11. Techniques used in implementing this program include massive parallel processing and distributed processing in real-time. The program uses Distributed Interactive Simulation (DIS) and HIgh Level Architecture (HLA) technologies and operates on commercial off the shelf PCs and LINUX operating system. |
|
| |
AWACS Modeling and Simulation (AMS) Training System |
| |
Systems Modeling |
| |
Communications Engineering, Radar Test Set (Digital Data Control-Monitor) |
|
| Aircraft Automated Logistics |
| |
Program Development & Operations |
| |
EIIT Administration |
|
| Aircraft Cleaning--Paint Stripping |
| |
Material Development |
| |
Materials and Bioengineering |
| |
Manufacturing Systems |
| |
Automated Surface Processing |
|
| Aircraft Electronic--EMC-RTCA/FAA DO-160 |
| |
Central Office |
| |
EMCS |
| |
Electromagnetic Compatibility Research |
| |
Electromagnetic Compatibility Research, Additional EMC Services |
| |
Fluids & Machinery Engineering |
|
| Aircraft Electronics--Failure Analysis |
|
| Also see electronic component construction analysis and failure analysis |
|
| |
Electronics Systems & Robotics |
| |
Failure Analysis |
|
| Aircraft Electronics/Avionics |
| |
Central Office |
| |
Aerospace Engineering |
| |
Integrated Diagnostics |
| |
Aircraft Systems Integration |
| |
Program Development & Operations |
|
| UH-1N Iroquois communications, navigation, and Identification systems. F-14A Tomcat communications, navigation, Identification and detection systems. E-2C and E-2C (Navigation Upgrade) Hawkeye communications, navigation, Identification and detection system. |
|
| |
Intelligent Systems |
|
| Aircraft Engine Health Monitoring and Diagnostics |
| |
Aerospace Engineering |
|
| Aircraft Engine Test Cell Support |
|
| Jet engine support, including: Applications of Cycle Deck models, Engine performance analysis, and Jet propulsion system support |
|
| |
Systems & Sensors |
|
| Aircraft Engine Test Stand Design |
| |
Systems & Sensors |
|
| Aircraft Engines |
| |
Central Office |
| |
Fuel & Fleet |
| |
Aerospace Engineering |
| |
ASD Administration |
| |
Aircraft Systems Integration |
| |
EIIT Administration |
| |
Computational Mechanics |
| |
Materials Science & Failure Analysis |
| |
Materials Engineering |
| |
Environmental Performance of Materials |
| |
Rotating Machinery Dynamics |
| |
Aerospace Systems Engineering |
| |
Mechanics & Materials |
|
| Jet Engine Test |
|
| |
Systems & Sensors |
|
| Aircraft Flight Controls |
|
| Stability Augmentation
Path and Navigation
In-Flight Data Collection |
|
| |
Autonomous Systems & Controls |
|
| Aircraft Flight Testing |
| |
Central Office |
| |
Aerospace Engineering |
| |
Advanced Instruments & Telemetry Systems |
| |
Fluids & Machinery Engineering |
| |
Aerospace Structures |
| |
Structural Engineering |
|
| Aircraft Fuel Systems |
|
| Functional analysis, safety analysis (SA), failure modes and effects analysis (FMEA), and maintenance practice assessment of civilian and military aircraft fuel systems. FAA approved wing slosh tests in accordance with FAR 23.965(b) and (c). |
|
| |
Fuels, Lubricants & Fluids Applications |
| |
Engine, Emissions & Vehicle Research |
|
| Aircraft Maintenance |
| |
Central Office |
| |
Employee Development Office |
| |
Material Development |
| |
Materials and Bioengineering |
| |
Aerospace Engineering |
| |
ASD Administration |
| |
Integrated Diagnostics |
| |
Robotics & Automation Engineering |
| |
Sensor Systems & Nondestructive Evaluation (NDE) Technology |
|
| Aircraft Maintenance Chemical & Product |
| |
Material Development |
| |
Materials and Bioengineering |
| |
Automation & Data Systems |
|
| Aircraft Maintenance Training |
|
| Instructional definition, design, development, test, installation and support of curricula, classroom aids, manuals, courseware, static mockups, interactive devices, and simlators that are used to teach maintanance concepts, troubleshooting procedures and repair actions for aircraft systems including structures, engines, hydraulics, fuel, electronics, instruments and avionics computers. |
|
| |
Employee Development Office |
| |
Intelligent Systems |
|
| Aircraft Painting--Coatings |
| |
Material Development |
| |
Materials and Bioengineering |
| |
Vice President's Office |
| |
Computational Mechanics |
|
| Aircraft Refinishing |
| |
Material Development |
| |
Materials and Bioengineering |
| |
S & P |
| |
Applied Physics |
|
| Aircraft Structural Materials |
|
| Stress analysis, fatigue and fracture evaluation, materials property testing, corrosion, material substitution |
|
| |
Electromechanical & Optical Systems |
| |
Aerospace Structures |
| |
Structural Engineering |
| |
Mechanics & Materials |
|
| Aircraft Structural Testing |
| |
Engine Design & Analysis |
| |
Fluids & Machinery Engineering |
| |
Aerospace Structures |
| |
Structural Engineering |
|
| Aircraft Structures |
| |
Aerospace Structures |
| |
Structural Engineering |
|
| Aircraft Systems Engineering |
|
| Including: Requirements analysis, Specification development, Preliminary design, Detailed design, Integration and testing (I&T), Prototyping. |
|
| |
ASD Administration |
|
| Aircraft Systems Training Development |
|
| Avionics course development, computer aided instruction, interactive courseware, training aid development. |
|
| |
Intelligent Systems |
|
| Development of training materials on aircraft systems |
|
| |
Autonomous Systems & Controls |
|
| AIRCRAFT SYSTEMS TRAINING INSTRUCTION |
|
| AIRCRAFT SYSTEMS TRAINING INSTRUCTION |
|
| |
Employee Development Office |
|
| Aircraft Training Device |
|
| Definition, design, development, test, installation and support of static mockups, part-task trainers, and high fidelity simulators that are used to train ground crews, mission crews and flight crews in systems familiarization, operational and emergency procedures, and maintenance tasks for aircraft systems including structures, engines, hydraulics, fuel, electronics, instruments, communications, and avionics computers. |
|
| |
Emerging Training and Performance Technologies Department |
|
| E-2C Hawkeye Integrated System Maintenance Trainer (ISMT), B-52 Stratofortress Bomb Navigation Maintenance Trainer (BNST). |
|
| |
Intelligent Systems |
|
| Aircraft Vehicle Networks and Flight Test Systems |
|
| Including: Real-time data acquisition, recording and telemetry, IEEE-1588 precision network-based time synchronization, 10/100/1000 copper/fiber Ethernet, Multicast UDP/IP data transport, Total sensor data rates exceeding 500 Mbps, Automated and centralized network management systems, Integrated health and status monitoring,
Flight-ruggedized equipment. |
|
| |
Advanced Instruments & Telemetry Systems |
|
| Aircraft, Helicopter Engine Test Stand and Test Cell Upgrade |
| |
Systems & Sensors |
|
| Airships |
|
| Airships |
|
| |
Space Systems |
|
| AL ThermCond |
|
| Thermal Conductivity - Oils (specify temperature) |
|
| |
Lube Prof Administrative Staff |
|
| AlcoholExtract/GC |
|
| AlcoholCont. Fuel Dilution - Ethanol, Methanol, t-Butanol. |
|
| |
Lube Prof Administrative Staff |
|
| ALPHA SPEC |
|
| ALPHA SPEC - SEE NOTES FOR INSTRUCTIONS |
|
| |
Vice President's Office |
| |
Analytical & Environmental Chemistry |
|
| Alternative Fuel--Coal Slurry |
|
| Fundamentals of coal slurry fuel formulation and utilization in combustion engines have been examined. |
|
| |
Chemical Defense |
| |
Engine, Emissions & Vehicle Research |
| |
Operations |
|
| Alternative Fuels |
|
| Alternative fuel: gasoline engines (liquefied petroleum gas) and diesel engines, including methanol, ethanol, biodiesel, DME, natural gas, etc., as well as fuels that have been formulated as an "alternative" to a fuel that has its properties regulated to be within certain values (i.e., TxLED (Texas low emitting diesel fuel), CARB fuel (California Air Resources Board fuel). |
|
| |
Chemical & Refining Process Development |
| |
Fuels & Energy Development |
| |
Process Chemistry |
| |
Filtration |
| |
Fuels, Lubricants & Fluids Applications |
| |
Medium Speed Diesel Engines |
| |
Engine & Vehicle R&D |
| |
Chemistry Lab |
| |
Emissions R&D |
| |
Engine Development |
| |
Certification Audit & Compliance |
| |
Fuel & Fleet |
| |
Engine Lubricants Research |
| |
Gasoline |
|
| Alternative Fuels Center |
|
| Provides specialty formulated fuel blending, Offers compositional analysis support, Includes a fuel storage tank farm. |
|
| |
Chemical & Refining Process Development |
| |
Fuels & Energy Development |
| |
Chemistry Lab |
|
| AM ISO |
|
| AMERICIUM ISO BY ALPHA (radiochemistry test) |
|
| |
Vice President's Office |
|
| AMERICIUM |
|
| ANALYSIS FOR TOTAL AMERICIUM (radiochemistry test) |
|
| |
Vice President's Office |
| |
Analytical & Environmental Chemistry |
|
| AMERICIUM241 |
|
| ANALYSIS FOR AMERICIUM-241 (radiochemistry test) |
|
| |
Vice President's Office |
| |
Analytical & Environmental Chemistry |
|
| Amino Acid Analysis |
|
| Amino Acid Analysis |
|
| |
Microencapsulation & Nanomaterials |
|
| AMS 77-074 |
|
| Method AMS 77-074. Appearance of Additive by Visual Inspection. |
|
| |
Lube Prof Administrative Staff |
|
| AMS 90-009 |
|
| AMS 90-009. Sediment - Determination of Initial and Extended Sediment in Additive. |
|
| |
Lube Prof Administrative Staff |
|
| Analog Design |
| |
Applied Physics |
| |
Engineering Applications & Systems Development |
| |
Sensor Systems & Nondestructive Evaluation (NDE) Technology |
|
| Analog Study--Gas Compressors & Pumps |
| |
Fuel & Fleet |
| |
Fluids & Machinery Engineering |
| |
Fluid Machinery Systems |
|
| Analysis of Natural Gas |
|
| Analysis of natural gas by Gas Chromatography-ASTM D1945 |
|
| |
Process Chemistry |
|
| Analysis--Chemical Agents |
| |
Demilitarization Laboratory Support |
| |
Chemistry and Chemical Engineering Division |
| |
Vice President's Office |
| |
Environmental Engineering & Monitoring |
|
| Analysis--Material Composition |
| |
Process Chemistry |
| |
Sample Management/Report |
| |
Fuels, Lubricants & Fluids Applications |
| |
Engine, Emissions & Vehicle Research |
| |
Electronics Systems & Robotics |
| |
Materials Engineering |
| |
Surface Engineering &Materials Chemistry |
| |
Environmental Performance of Materials |
|
| Analysis--Metals |
| |
Analytical & Environmental Chemistry |
| |
Inorganics/Radiochemistry |
|
| Analysis--Organics |
|
| Analytical Chemistry by GC-MS (gas chromatography/mass spectrometry), GC-FID (flame ionization) |
|
| |
Process Chemistry |
|
| Analytical Chemistry by HPLC (high performance liquid chromatography, GC/MS (gas chromatography/mass spectroscopy), LC/MS (liquid chromatography/mass spectroscopy), LC/MS/MS (liquid chromatography/tandem mass spectroscopy), CE (capillary electrophoresis), and GPC (gel permeation chromatography) |
|
| |
Chemical Engineering |
| |
Division Quality Assurance |
| |
Process Chemistry |
| |
Bioanalytical Chemistry & Environmental Health |
| |
Sample Management/Report |
| |
Organic |
| |
Fuel Lab Prof Staff |
|
| Analysis--Vibration & Pulsation |
| |
Fluids & Machinery Engineering |
| |
Fluid Machinery Systems |
|
| Analysis--Vibroacoustics |
|
| Developing solutions to noise and vibration problems through measurement of vibration levels and acoustic output, frequency and time domain analysis of measured data, noise source identification and isolation, and application of psychoacoustic metrics to gauge perceived annoyance. |
|
| |
Fluids & Machinery Engineering |
| |
Structural Engineering |
| |
Structural Dynamics & Product Assurance |
|
| Analysis-Mechanical Systems |
| |
Powertrain Controls |
| |
Fluid Dynamics |
|
| Analytical Chemistry |
| |
Synthesis & Process Chemistry |
|
| Analytical Coordinator |
|
| Analytical Coordinator |
|
| |
Division Quality Assurance |
|
| Analytical Sonics--Fuels & Lubricants |
| |
Chemical Engineering |
| |
Chemical Defense |
|
| ANSI/BIFMA Std Testing--Office Furniture |
|
| Includes, desks, chairs, tables, and such. |
|
| |
Fire Technology |
| |
Fluids & Machinery Engineering |
|
| Antenna--Microwave and Millimter Wave |
|
| Includes all types of phased arrays and gain horns. Also, slow-wave structures, parabolic dishes, waveguide feedhorns, helices, Archimedean spirals, patch antennas including slot-fed broadband variants, conformal antennas, satcom antennas, co-linear verical arrays and concealed antennas. |
|
| |
Applied Physics |
| |
Office of the Director |
| |
Office of the Director |
| |
Tracking Systems |
| |
Materials Engineering |
|
| Antenna--Microwave Phased Arrays |
|
| Designing aerospace phased array antennas and systems (missile radar and satcom systems). Also, linear- and circularly polarized microstrip patch antenna arrays and stripline slot, waveguide aperture, dipole, yagi and Franklin arrays. |
|
| |
Applied Physics |
| |
Office of the Director |
| |
Office of the Director |
| |
Program Management |
| |
Tracking Systems |
|
| Antennas--Direction Finding (DF) |
| |
Office of the Vice President |
| |
Office of the Director |
| |
Program Management |
|
| Antennas--Disk Cone (Sales) |
| |
Office of the Director |
| |
Program Management |
| |
Surveillance & Geolocation |
| |
Tracking Systems |
|
| Antennas--High Frequency (HF/VHF) |
|
| Custom anenna design for specific applications including fixed and mobile, gain producing, arrayed, small size, and specialized concealments. |
|
| |
Applied Physics |
| |
Office of the Vice President |
| |
Office of the Director |
| |
Program Management |
|
| Antennas--Plastic/Conducting Polymer |
| |
Material Development |
| |
Materials and Bioengineering |
| |
Program Management |
| |
Surveillance & Geolocation |
|
| Antennas--Radar |
| |
Office of the Director |
|
| Antennas--Testing (RF) |
|
| Antenna measurement capabilities include swept impedance characteristics, gain, and pattern using an outdoor test range. |
|
| |
Applied Physics |
| |
Office of the Vice President |
|
| Antifreeze |
| |
Fuels, Lubricants & Fluids Applications |
| |
Engine, Emissions & Vehicle Research |
| |
Lube Prof Administrative Staff |
|
| Antifreeze (Ethylene Glycol) |
| |
Lube Prof Administrative Staff |
|
| Antilock Brake Systems on Trucks |
| |
Engine, Emissions & Vehicle Research |
|
| API 607 |
|
| Fire Test for Quarter-turn Valves and Valves Equipped with Nonmetallic Seats |
|
| |
Fire Resistance |
|
| API Valve Tests |
|
| API 11v2, API 6AV1 |
|
| |
Fluid Dynamics |
| |
Fluid Dynamics & Multiphase Flow |
|
| API15HR Fiberglass Pipe |
|
| Fiberglass Pipe |
|
| |
Marine & Offshore Systems |
|
| API15LR Fiberglass Pipe |
|
| Fiberglass Pipe |
|
| |
Marine & Offshore Systems |
|
| Application Specific Integrated Circuits |
|
| ASICs might be interpreted to cover several areas. Traditionally they are custom fabricated electronic ICs for a specific purpose, but they might also include programmable logic such as Field Programmable Gate Arrays
(FPGAs).
|
|
| |
Lighter-than-Air Systems |
| |
Space Systems |
| |
ASD Administration |
| |
Avionics & Support Systems |
| |
Biomedical Engineering |
| |
Electrical Systems |
| |
Engineering Applications & Systems Development |
| |
Sensor Systems & Nondestructive Evaluation (NDE) Technology |
|
| Applied Pharmacology |
|
| Analytical services, GLP studies. |
|
| |
Microencapsulation & Nanomaterials |
| |
Bioanalytical Chemistry & Environmental Health |
| |
Organic |
| |
Materials Engineering |
| |
Surface Engineering &Materials Chemistry |
| |
Environmental Performance of Materials |
|
| ARP 901 |
|
| ARP901. Filter Test - Bubble Point. |
|
| |
Lube Prof Administrative Staff |
|
| Artificial blood |
|
| PFC, poly hemoglobin, polymer encapsulation of hemoglboin |
|
| |
Materials and Bioengineering |
|
| Asphalt Testing |
| |
Chemical Engineering |
| |
Chemical Defense |
|
| ASTM B 117 |
|
| Salt Fog Testing |
|
| |
Structural Dynamics & Product Assurance |
|
| ASTM D 1094 |
|
| ASTM D1094: Standard Test Method for Water Reaction of Aviation Fuels.
|
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 1119 |
|
| ASTM D1119: Standard Test Method for Percent Ash Content of Engine Coolants (Ash - Coolants). |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 1120 |
|
| ASTM D1120: Standard Test Method for Boiling Point of Engine Coolants. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 1121 |
|
| ASTM D1121: Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 1122 |
|
| ASTM D1122: Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer (Specific Gravity - Coolants). |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 1123 |
|
| ASTM D1123: Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method.
|
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 1159 |
|
| ASTM D1159: Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration.
|
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 1160 |
|
| ASTM D1160: Standard Test Method for Distillation of Petroleum Products at Reduced Pressure. |
|
| |
Fuels & Energy Development |
| |
Process Chemistry |
| |
Chemistry Lab |
| |
Lube Prof Administrative Staff |
|
| ASTM D 1177 |
|
| ASTM D1177: Standard Test Method for Freezing Point of Aqueous Engine Coolants. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 1218 |
|
| ASTM D1218: Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 1264 |
|
| ASTM D1264: Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 1275 |
|
| ASTM D1275: Standard Test Method for Corrosive Sulfur in Electrical Insulating Oils. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 1287 |
|
| ASTM D1287: Standard Test Method for pH of Engine Coolants and Antirusts (pH - Coolants). |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 129 |
|
| ASTM D129: Standard Test Method for Sulfur in Petroleum Products. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 1298 |
|
| ASTM D1298: Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 130 |
|
| ASTM D130. Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test.
(D130: Corrosion - Copper - Provide Conditions, D103 ATF: Corrosion - Copper Strip - 3 hours at 150C, D130 C4: Corrosion - Copper - C4 qualification 3 hrs at 150C, D130 Mod: Corrosion - Copper - With Specimen Weight Loss) |
|
| |
Chemistry Lab |
| |
Lube Prof Administrative Staff |
|
| ASTM D 1319 |
|
| ASTM D1319: Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption. |
|
| |
Process Chemistry |
| |
Lube Prof Administrative Staff |
|
| ASTM D 1322 |
|
| ASTM D1322: Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel. (Smoke Point) |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 1331 |
|
| ASTM D1331: Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 1384 |
|
| ASTM D1384: Standard Test Method for Corrosion Test for Engine Coolants in Glassware. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 1401 |
|
| ASTM D1401: Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 1403 |
|
| ASTM D1403: Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment.
|
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 1405 |
|
| ASTM D1405: Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels (Heat of Combustion - Net - Aviation Fuels - Calculated). |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 1500 |
|
| ASTM D1500: Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale). |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 1533 |
|
| ASTM D1533: Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 1552 |
|
| Sulfur in Petroleum Products (High-Temperature Method) |
|
| |
Process Chemistry |
|
| ASTM D 156 |
|
| ASTM D156: Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method). |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 1598 |
|
| ASTM D1598 - 02(2009) Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
|
|
| |
Marine & Offshore Systems |
|
| ASTM D 1613 |
|
| ASTM D1613: Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 1662 |
|
| ASTM D1662: Standard Test Method for Active Sulfur in Cutting Oils. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 1742 |
|
| ASTM D1742: Standard Test Method for Oil Separation from Lubricating Grease During Storage. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 1743 |
|
| ASTM D1743: Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 1748 |
|
| ASTM D1748: Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet. (DEXRON) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 1796 |
|
| ASTM D1796: Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure).
|
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 1840 |
|
| ASTM D1840: Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry (Naphthalene Content - Jet Fuel) |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 1881 |
|
| ASTM D1881: Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware. (Foaming Characteristics - Coolants) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 1882 |
|
| ASTM D1882: Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles (Effect on Automotive Finishes - Coolants) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 189 |
|
| ASTM D189: Standard Test Method for Conradson Carbon Residue of Petroleum Products |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 1903 |
|
| ASTM D1903: Standard Practice for Determining the Coefficient of Thermal Expansion of Electrical Insulating Liquids of Petroleum Origin, and Askarels (Coefficient of Thermal Expansion of Electrical Insulating Liquids). |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2007 |
|
| ASTM D2007: Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method (Clay Gel Analysis) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2008 |
|
| ASTM D2008: Standard Test Method for Ultraviolet (UV) Absorbance and Absorptivity of Petroleum Products. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2068 |
|
| ASTM D2068: Standard Test Method for Determining Filter Blocking Tendency. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2070 |
|
| ASTM D2070: Standard Test Method for Thermal Stability of Hydraulic Oils. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 217 |
|
| ASTM D217: Standard Test Methods for Cone Penetration of Lubricating Grease. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2265 |
|
| ASTM D2265: Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2266 |
|
| ASTM D2266: Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method). (Four Ball - Wear Properties - Grease) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2270 |
|
| ASTM D2270: Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100C. |
|
| |
Process Chemistry |
| |
Lube Prof Administrative Staff |
|
| ASTM D 2272 |
|
| ASTM D2272: Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel. (Rotating Bomb Oxidation Test) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2273 |
|
| ASTM D2273: Standard Test Method for Trace Sediment in Lubricating Oils.
|
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2276 |
|
| ASTM D2276: Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling. |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 2386 |
|
| ASTM D2386: Standard Test Method for Freezing Point of Aviation Fuels (Freeze Point - Aviation Fuels). |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 240 |
|
| ASTM D240: Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter. |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 2425 |
|
| ASTM D2425: Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2440 |
|
| ASTM D2440: Standard Test Method for Oxidation Stability of Mineral Insulating Oil. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2500 |
|
| ASTM D2500: Standard Test Method for Cloud Point of Petroleum Products.
|
|
| |
Chemistry Lab |
| |
Lube Prof Administrative Staff |
|
| ASTM D 2509 |
|
| ASTM D2509: Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method). |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2532 |
|
| Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants.
|
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2540 |
|
| ASTM D2540. Drop-Weight Sensitivity of Liquid Monopropellants.
|
|
| |
Engineering & Research |
|
| ASTM D 2570 |
|
| ASTM D2570: Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2584 |
|
| ASTM D2584. Ignition Loss of Cured Reinforced Resins.
|
|
| |
Fire Resistance |
|
| ASTM D 2595 |
|
| ASTM D2595: Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range.
|
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2596 |
|
| ASTM D2596: Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2603 |
|
| ASTM D2603: Test Method for Sonic Shear Stability of Polymer-Containing Oils. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2619 |
|
| ASTM D2619: Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method). |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2622 |
|
| ASTM D2622: Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2624 |
|
| ASTM D2624: Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels. |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 2670 |
|
| ASTM D2670: Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method).
|
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2699 |
|
| ASTM D2699: Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel. |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 2700 |
|
| ASTM D2700: Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 2709 |
|
| ASTM D2709: Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge. |
|
| |
Chemistry Lab |
| |
Fuel Lab Prof Staff |
|
| ASTM D 2710 |
|
| ASTM D2710: Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2711 |
|
| ASTM D2711: Standard Test Method for Demulsibility Characteristics of Lubricating Oils. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2782 |
|
| ASTM D2782: Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method). |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2783 |
|
| ASTM D2783: Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method). |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2809 |
|
| ASTM D2809: Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 287 |
|
| ASTM D287: Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method). (Density, Specific and API Gravity by Hydrometer) |
|
| |
Chemistry Lab |
| |
Lube Prof Administrative Staff |
|
| ASTM D 2887 |
|
| ASTM D2887: Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography. (Simulated Distillation - Diesel Fuels/Solvents). |
|
| |
Process Chemistry |
| |
Process Chemistry Development Laboratory |
| |
Fuel Lab Prof Staff |
|
| ASTM D 2892 |
|
| Distillation of Crude Petroleum (15-Theoretical Plate Column) |
|
| |
Process Chemistry |
|
| ASTM D 2893 |
|
| ASTM D2893: Standard Test Method for Oxidation Characteristics of Extreme-Pressure Lubrication Oils. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2896 |
|
| ASTM D2896: Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration. (Base Number/Alkalinity Value - Perchloric Acid Titration) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2982 |
|
| ASTM D2982: Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils. (Glycol - Used Oil - Semi-Quantitative). |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2983 |
|
| ASTM D2983: Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 2992 |
|
| ASTM D2992 - 06 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
|
|
| |
Marine & Offshore Systems |
|
| ASTM D 322 |
|
| ASTM D322. Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation. (Fuel Dilution - Crankcase Oils) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 3227 |
|
| ASTM D3227: Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method). |
|
| |
Process Chemistry |
| |
Fuel Lab Prof Staff |
|
| ASTM D 3228 |
|
| ASTM D3228: Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method. |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 3231 |
|
| ASTM D3231: Standard Test Method for Phosphorus in Gasoline.
|
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 3233 |
|
| ASTM D3233: Standard Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods)
|
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 3237 |
|
| ASTM D3237: Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy.
|
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 3238 |
|
| ASTM D3238: Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method. (Carbon Type - Calculated) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 3241 |
|
| ASTM D3241: Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels. (JFTOT- Jet Fuel Thermal Oxidation Test) |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 3242 |
|
| ASTM D3242: Standard Test Method for Acidity in Aviation Turbine Fuel. (Acidity - Aviation Fuels). |
|
| |
Process Chemistry |
| |
Fuel Lab Prof Staff |
|
| ASTM D 3279 |
|
| n-Heptane Insolubles |
|
| |
Process Chemistry |
|
| ASTM D 3321 |
|
| ASTM D3321: Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants. (Freeze Point - Coolants - Refractometer). |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 3339 |
|
| ASTM D3339: Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 3427 |
|
| ASTM D3427: Standard Test Method for Air Release Properties of Petroleum Oils. (Gas Bubble Separation Time) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 3524 |
|
| ASTM D3524: Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography. (Fuel Dilution - Diesel) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 3525 |
|
| ASTM D3525: Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography.
|
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 3606 |
|
| ASTM D3606: Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography. (Benzene with EPA modifications) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 3701 |
|
| ASTM D3701: Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry.
|
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 3703 |
|
| ASTM D3703: Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels. |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 381 |
|
| ASTM D381: Standard Test Method for Gum Content in Fuels by Jet Evaporation. |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 3828 |
|
| ASTM D3828: Standard Test Methods for Flash Point by Small Scale Closed Cup Tester. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 3829 |
|
| ASTM D3829: Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 3831 |
|
| ASTM D3831: Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy.
|
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 3948 |
|
| ASTM D3948: Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer. (Micro Separation - Water in Fuel) |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 4007 |
|
| Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure) |
|
| |
Process Chemistry |
|
| ASTM D 4048 |
|
| ASTM D4048: Standard Test Method for Detection of Copper Corrosion from Lubricating Grease. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 4052 |
|
| ASTM D4052: Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter. |
|
| |
Process Chemistry |
| |
Lube Prof Administrative Staff |
|
| ASTM D 4053 |
|
| ASTM D4053: Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 4055 |
|
| ASTM D4055: Standard Test Method for Pentane Insolubles by Membrane Filtration. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 4172 |
|
| ASTM D4172: Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method). (Four Ball - Wear Properties) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 4176 |
|
| ASTM D4176: Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures) |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 4291 |
|
| ASTM D4291: Standard Test Method for Trace Ethylene Glycol in Used Engine Oil. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 4294 |
|
| ASTM D4294: Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry.
|
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 4308 |
|
| ASTM D4308: Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 4310 |
|
| ASTM D4310: Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 4340 |
|
| ASTM D4340: Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions.
|
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 445 |
|
| ASTM D445: Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity). (Viscosity - Kinematic / Viscosity - Stripped). |
|
| |
Process Chemistry |
| |
Chemistry Lab |
| |
Lube Prof Administrative Staff |
|
| ASTM D 4530 |
|
| ASTM D4530: Standard Test Method for Determination of Carbon Residue (Micro Method). |
|
| |
Chemistry Lab |
| |
Lube Prof Administrative Staff |
|
| ASTM D 4539 |
|
| ASTM D4539: Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT). |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 4625 |
|
| ASTM D4625: Standard Test Method for Distillate Fuel Storage Stability at 43C (110F). |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 4627 |
|
| ASTM D4627: ASTM D4627 - 92(2007) Standard Test Method for Iron Chip Corrosion for Water-Dilutable Metalworking Fluids. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 4629 |
|
| ASTM D4629: Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection. |
|
| |
Chemistry Lab |
| |
Lube Prof Administrative Staff |
|
| ASTM D 4636 |
|
| ASTM D4636: Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 4681 |
|
| ASTM D4681: Specification For Lubricants For Two-Stroke-Cycle Gasoline Engines- (TSC-4) (Rust - with Reference). |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 4682 |
|
| ASTM D4682: Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants. (Miscibility - NMMA - with Reference - Specify Category or Temperature) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 4683 |
|
| ASTM D4683: Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 C. (Viscosity - Tapered Bearing Simulator) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 4684 |
|
| ASTM D4684: Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 471 |
|
| ASTM D471: Standard Test Method for Rubber PropertyEffect of Liquids. (Seal Test) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 473 |
|
| ASTM D473: Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 4737 |
|
| ASTM D4737: Standard Test Method for Calculated Cetane Index by Four Variable Equation. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 4739 |
|
| ASTM D4739: Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 4741 |
|
| ASTM D4741: Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer.
|
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 4742 |
|
| ASTM D4742: Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT). |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 4808 |
|
| ASTM D4808: Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy.
|
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 4809 |
|
| ASTM D4809: Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method).
|
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 4814 |
|
| ASTM D4814: Standard Specification for Automotive Spark-Ignition Engine Fuel. (Silver Corrosion)
|
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 4815 |
|
| ASTM D4815: Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 482 |
|
| ASTM D482: Standard Test Method for Ash from Petroleum Products. |
|
| |
Chemistry Lab |
| |
Lube Prof Administrative Staff |
|
| ASTM D 4927 |
|
| ASTM D4927: Standard Test Methods for Elemental Analysis of Lubricant and Additive ComponentsBarium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy.
|
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 4928 |
|
| ASTM D4928: Standard Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration. |
|
| |
Lube Prof Administrative Staff |
|
| Water in Crude Oils by Coulometric Karl Fischer Titration |
|
| |
Process Chemistry |
|
| ASTM D 4951 |
|
| ASTM D4951: Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry. |
|
| |
Chemistry Lab |
| |
Lube Prof Administrative Staff |
|
| ASTM D 4952 |
|
| ASTM D4952: Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test). |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 5001 |
|
| ASTM D5001: Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE). |
|
| |
Filtration |
| |
Fuels, Lubricants & Fluids Applications |
| |
Fuel Lab Prof Staff |
|
| ASTM D 5002 |
|
| Density and Relative Density of Crude Oils by Digital Density Analyzer |
|
| |
Process Chemistry |
|
| ASTM D 5006 |
|
| ASTM D5006: Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels. |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 5133 |
|
| ASTM D5133: Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique. (Brookfield - Scanning) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 5183 |
|
| ASTM D5183: Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine. (Four Ball - Coefficient of Friction) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 5185 |
|
| ASTM D5185: Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES). |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 5186 |
|
| ASTM D5186: Standard Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography. (Aromatics - Diesel Fuel (SFC)) |
|
| |
Chemistry Lab |
| |
Fuel Lab Prof Staff |
|
| ASTM D 5188 |
|
| ASTM D5188: Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method).
|
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 5191 |
|
| ASTM D5191: Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method). (Vapor Pressure - Reid - Automatic, Grabner) |
|
| |
Process Chemistry |
| |
Lube Prof Administrative Staff |
|
| ASTM D 5236 |
|
| Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method) |
|
| |
Process Chemistry |
|
| ASTM D 524 |
|
| ASTM D524: Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products. |
|
| |
Chemistry Lab |
| |
Lube Prof Administrative Staff |
|
| ASTM D 525 |
|
| ASTM D525: Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method). |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 5291 |
|
| ASTM D5291: Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants. |
|
| |
Process Chemistry |
| |
Chemistry Lab |
| |
Lube Prof Administrative Staff |
|
| ASTM D 5293 |
|
| ASTM D5293: Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35C Using the Cold-Cranking Simulator. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 5304 |
|
| ASTM D5304: Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure.
|
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 5452 |
|
| ASTM D5452: Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration. |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 5453 |
|
| ASTM D5453: Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence.
|
|
| |
Chemistry Lab |
|
| ASTM D 5481 |
|
| ASTM D5481: Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 5483 |
|
| ASTM D5483: Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry. (Oxidation Induction Time by DSC) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 5501 |
|
| ASTM D5501: Standard Test Method for Determination of Ethanol Content of Denatured Fuel Ethanol by Gas Chromatography. |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 5580 |
|
| ASTM D5580: Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 5599 |
|
| ASTM D5599: Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 56 |
|
| ASTM D56. Standard Test Method for Flash Point by Tag Closed Cup Tester. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 5621 |
|
| ASTM D5621: Standard Test Method for Sonic Shear Stability of Hydraulic Fluids. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 566 |
|
| ASTM D566: Standard Test Method for Dropping Point of Lubricating Grease. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 5662 |
|
| ASTM D5662: Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 5762 |
|
| ASTM D5762: Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 5769 |
|
| ASTM D5769: Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 5773 |
|
| ASTM D5773: Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method). |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 5800 |
|
| ASTM D5800: Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method. (Volatility - NOACK (1 hour at 250C)) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 5827 |
|
| ASTM D5827: Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography. (Ion Chromatography - Includes Chloride, Nitrate, Nitrite, Phosphate and Sulfate) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 5845 |
|
| ASTM D5845: Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 5949 |
|
| ASTM D5949: Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method). (Pour Point - Automated) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 5968 |
|
| ASTM D5968: Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121C (Corrosion Bench Test (CBT) (250F)). |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 5972 |
|
| ASTM D5972: Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method). (Freeze Point) |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 6045 |
|
| ASTM D6045: Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method. (Color, ASTM by Automatic Method). |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 6078 |
|
| ASTM D6078: Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE). (BOCLE) |
|
| |
Filtration |
| |
Fuels, Lubricants & Fluids Applications |
| |
Fuel Lab Prof Staff |
|
| ASTM D 6079 |
|
| ASTM D6079: Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR).
|
|
| |
Filtration |
| |
Fuels, Lubricants & Fluids Applications |
| |
Fuel Lab Prof Staff |
|
| ASTM D 6082 |
|
| ASTM D6082: Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 611 |
|
| ASTM D611: Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 613 |
|
| ASTM D613: Standard Test Method for Cetane Number of Diesel Fuel Oil (Cetane Number - CFR). |
|
| |
Chemistry Lab |
| |
Lube Prof Administrative Staff |
|
| ASTM D 6130 |
|
| ASTM D6130: Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 6186 |
|
| ASTM D6186: Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC). |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 6217 |
|
| ASTM D6217: Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration. |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 6278 |
|
| ASTM D6278: Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus.
|
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 6304 |
|
| ASTM D6304: Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 6335 |
|
| ASTM D6335: Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test. (TEOST)
|
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 6352 |
|
| ASTM D6352: Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700C by Gas Chromatography. (Simulated Distillation - Oils) |
|
| |
Process Chemistry |
| |
Lube Prof Administrative Staff |
|
| ASTM D 6371 |
|
| ASTM D6371: Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels. |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 6378 |
|
| ASTM D6378: Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method). |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 6417 |
|
| ASTM D6417: Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 6421 |
|
| ASTM D6421: Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography. (PFI Bench Rig Test) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 6423 |
|
| ASTM D6423: Standard Test Method for Determination of pHe of Ethanol, Denatured Fuel Ethanol, and Fuel Ethanol (Ed75-Ed85).
|
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 6443 |
|
| ASTM D6443: Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure). |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 6468 |
|
| ASTM D6468: Standard Test Method for High Temperature Stability of Middle Distillate Fuels. |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 6550 |
|
| ASTM D6550: Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 6584 |
|
| ASTM D6584: Standard Test Method for Determination of Free and Total Glycerin in B-100 Biodiesel Methyl Esters By Gas Chromatography. |
|
| |
Chemistry Lab |
| |
Lube Prof Administrative Staff |
|
| ASTM D 6594 |
|
| ASTM D6594: Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135C. (Corrosion Bench Test (HTCBT) (275F)) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 6616 |
|
| ASTM D6616: Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100C. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 664 |
|
| ASTM D664: Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration.
|
|
| |
Process Chemistry |
| |
Chemistry Lab |
| |
Lube Prof Administrative Staff |
|
| ASTM D 665 |
|
| ASTM D665: Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water. (Rust Preventing Characteristics - DI-Water / Synthetic Sea Water). |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 6729 |
|
| ASTM D6729: Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography. (Detailed Hydrocarbon Analysis) |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 6751 |
|
| ASTM D6751: Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels. (Cold Soak Filtration of B100) |
|
| |
Filtration |
| |
Chemistry Lab |
| |
Fuel Lab Prof Staff |
|
| ASTM D 6756 |
|
| ASTM D6756: Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer. (Red Dye 26 in Diesel Fuel by Petrospec) |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 6793 |
|
| ASTM D6793: Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus
|
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 6794 |
|
| ASTM D6794: Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6-h) Heating Time. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 6795 |
|
| ASTM D6795: Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30-min) Heating Time. (EOFT) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 6811 |
|
| ASTM D6811: Standard Test Method for Measurement of Thermal Stability of Aviation Turbine Fuels under Turbulent Flow Conditions (HiReTS Method). |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 6896 |
|
| ASTM D6896: Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 6922 |
|
| ASTM D6922: Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 70 |
|
| Density of Semi-Solid Bituminous Materials (Pycnometer Method) |
|
| |
Process Chemistry |
|
| ASTM D 7039 |
|
| ASTM D7039: Standard Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry. |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 7097 |
|
| ASTM D7097: Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test-TEOST MHT. (MTEOST) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 7098 |
|
| ASTM D7098: Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 7109 |
|
| ASTM D7109: Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 7111 |
|
| ASTM D7111: Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES). (Elements in Biodiesel (B-100)) |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 7169 |
|
| ASTM D 7169 - Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography.pdf |
|
| |
Process Chemistry |
| |
Process Chemistry Development Laboratory |
|
| Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography.pdf |
|
| |
Process Chemistry |
|
| ASTM D 7214 |
|
| ASTM D7214: Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR (FTIR) Using Peak Area Increase Calculation.
|
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 7216 |
|
| ASTM D7216: Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 7317 |
|
| ASTM D7317: Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 7319 |
|
| ASTM D7319: Standard Test Method for Determination of Total and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography. |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 7321 |
|
| ASTM D7321: Standard Test Method for Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration.
|
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 7328 |
|
| ASTM D7328: Standard Test Method for Determination of Total and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection. |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 7563 |
|
| ASTM D7563: Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 808 |
|
| ASTM D808: Standard Test Method for Chlorine in New and Used Petroleum Products (Bomb Method). (Chlorine - Lubricating Oils). |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 86 |
|
| ASTM D86: Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure. Distillation - Gasoline, Kerosene, Gas, Oil. |
|
| |
Process Chemistry |
| |
Chemistry Lab |
| |
Lube Prof Administrative Staff |
|
| ASTM D 873 |
|
| ASTM D873: Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method) |
|
| |
Fuel Lab Prof Staff |
|
| ASTM D 874 |
|
| ASTM D874: Standard Test Method for Sulfated Ash from Lubricating Oils and Additives. |
|
| |
Chemistry Lab |
| |
Lube Prof Administrative Staff |
|
| ASTM D 892 |
|
| ASTM D892: Standard Test Method for Foaming Characteristics of Lubricating Oils. (Foaming Characteristics - Sequence I, II, III and IV - (MERCON)) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 893 |
|
| ASTM D893. Standard Test Method for Insolubles In Used Lubricating Oils.
|
|
| |
Lube Prof Administrative Staff |
|
| Insolubles in Used Lubricating Oils |
|
| |
Process Chemistry |
|
| ASTM D 91 |
|
| ASTM D91: Standard Test Method for Precipitation Number of Lubricating Oils
|
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 92 |
|
| ASTM D92: Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 93 |
|
| ASTM D93: Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester. |
|
| |
Chemistry Lab |
| |
Lube Prof Administrative Staff |
|
| ASTM D 94 |
|
| ASTM D94: ASTM D94 - 07 Standard Test Methods for Saponification Number of Petroleum Products. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 942 |
|
| ASTM D942: Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method (Oxidation Stability - Lubricating Greases).
|
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 943 |
|
| ASTM D943: Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 95 |
|
| ASTM D95. ASTM D95 - 05(2010) Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation. Water Content - Azeotropic Distillation. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 96 |
|
| ASTM D96: Water and Sediment - Crude Oil |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 97 |
|
| ASTM D97. Standard Test Method for Pour Point of Petroleum Products.
|
|
| |
Process Chemistry |
| |
Lube Prof Administrative Staff |
|
| ASTM D 971 |
|
| ASTM D971: Standard Test Method for Interfacial Tension of Oil Against Water by the Ring Method. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 972 |
|
| ASTM D972: Standard Test Method for Evaporation Loss of Lubricating Greases and Oils. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 974 |
|
| ASTM D974: Standard Test Method for Acid and Base Number by Color-Indicator Titration. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM D 975 |
|
| ASTM D975: Standard Specification for Diesel Fuel Oils.
|
|
| |
Chemistry Lab |
|
| ASTM D1895 |
|
| Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials |
|
| |
Chemical & Refining Process Development |
|
| ASTM D976 |
|
| ASTM D 976: Standard Test Method for Calculated Cetane Index of Distillate Fuels (Cetane Index (Calculated from D86 and D4052)) |
|
| |
Fuel Lab Prof Staff |
|
| ASTM E 108 |
|
| ASTM E108. Fire Tests of Roof Coverings.
|
|
| |
Material Flammability |
|
| ASTM E 119 |
|
| ASTM E119. Standard Test Methods for Fire Tests of Building Construction and Materials. Fire Testing. |
|
| |
Fire Resistance |
|
| ASTM E 1226 |
|
| ASTM E1226. Pressure and Rate of Pressure Rise for Combustible Dust.
|
|
| |
Engineering & Research |
|
| ASTM E 1232-02 |
|
| Temperature limit of flammability of chemicals |
|
| |
Engineering & Research |
|
| ASTM E 1269 |
|
| ASTM E1269: Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry. |
|
| |
Lube Prof Administrative Staff |
|
| ASTM E 1529 |
|
| ASTM E1529. Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies. |
|
| |
Fire Resistance |
|
| ASTM E 168 |
|
| ASTM E168 FTIR: Standard Practices for General Techniques of Infrared Quantitative Analysis. (Infrared Spectra) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM E 1725 |
|
| ASTM E1725. Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components.
|
|
| |
Fire Resistance |
|
| ASTM E 1794 |
|
| ASTM E1794. Salt spray and humidity testing per Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200F Elevated Humidity Service), Type II Panels. |
|
| |
Structural Dynamics & Product Assurance |
|
| ASTM E 1966 |
|
| ASTM E1966. Fire-Resistive Joint Systems.
|
|
| |
Fire Resistance |
|
| ASTM E 2010 |
|
| ASTM E2010. Positive Pressure Fire Tests of Window Assemblies. |
|
| |
Fire Resistance |
|
| ASTM E 202 |
|
| ASTM E202: Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols. (Glycol - Engine Coolant - Composition) |
|
| |
Lube Prof Administrative Staff |
|
| ASTM E 2021 |
|
| ASTM E2021. Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers. |
|
| |
Engineering & Research |
|
| ASTM E 2074 |
|
| ASTM E2074. Fire Tests of Door Assemblies.
|
|
| |
Fire Resistance |
|
| ASTM E 2079 |
|
| ASTM E2079. Limiting Oxygen (Oxidant) Concentration in Gases and Vapors.
|
|
| |
Engineering & Research |
|
| ASTM E 476 |
|
| Thermal Instability of Confined Condensed Phase Systems (Confinement Test).
|
|
| |
Engineering & Research |
|
| ASTM E 487 |
|
| ASTM E487. Constant-Temperature Stability of Chemical Materials.
|
|
| |
Engineering & Research |
|
| ASTM E 582 |
|
| ASTM E582. Minimum Ignition Energy and Quenching Distance in Gaseous Mixtures.
|
|
| |
Engineering & Research |
|
| ASTM E 659 |
|
| ASTM E659. Standard Test Method for Autoignition Temperature of Liquid Chemicals.
|
|
| |
Engineering & Research |
| |
Lube Prof Administrative Staff |
|
| ASTM E 680 |
|
| ASTM E680. Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials.
|
|
| |
Engineering & Research |
|
| ASTM E 681 |
|
| ASTM E681. Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases). Determination of limits of flammability (explosibility) of vapors and gasses in oxidative environments at ambient pressure.
|
|
| |
Engineering & Research |
|
| ASTM E 695-97 |
|
| ASTM E695-97. Method for Measuring Relative Resistance of Wall, Floor, and Roof Constructions to Impact Loading.
|
|
| |
Engineering & Research |
|
| ASTM E 789 |
|
| ASTM E789. Standard Test Method for Dust Explosions in a 1.2-Litre Closed Cylindrical Vessel.
|
|
| |
Engineering & Research |
|
| ASTM E 814 |
|
| ASTM E814. Fire Tests of Through Penetrations (Seals).
|
|
| |
Fire Resistance |
|
| ASTM E 84 |
|
| ASTM E84. Surface Burning Characteristics of Building Materials.
|
|
| |
Material Flammability |
|
| ASTM E 918 |
|
| ASTM E918. Standard Practice for Determining Limits of Flammability at Elevated Temperature and Pressure.
|
|
| |
Engineering & Research |
|
| ASTM E54.08.01 |
|
| Standardized Testing for response robot capability |
|
| |
Electronics Systems & Robotics |
|
| ASTM F 1173 |
|
| ASTM F1173. Fire and Hydrostatic Tests of Composite Pipe. Similar to IMO A.753(18).
|
|
| |
Engineering & Research |
|
| ASTM F 1273 |
|
| ASTM F1273. Standard Specifications for Tank Vent Flame Arrestors.
|
|
| |
Engineering & Research |
|
| ASTM F 1387 |
|
| ASTM F1387. Specification for Performance of Piping and Tubing Mechanically Attached Fittings.
|
|
| |
Fire Resistance |
|
| ASTM G 125 |
|
| ASTM G125. Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants.
|
|
| |
Engineering & Research |
|
| ASTM G 72 |
|
| ASTM G72. Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment.
|
|
| |
Engineering & Research |
|
| ASTM G 74 |
|
| ASTM G74. Ignition Sensitivity of Materials to Gaseous Fluid Impact.
|
|
| |
Engineering & Research |
|
| ASTM Testing--Helmets |
| |
Fluids & Machinery Engineering |
| |
Structural Dynamics & Product Assurance |
|
| ASTM Tests on Corrosion |
| |
Materials Engineering |
| |
Environmental Performance of Materials |
|
| Astronomy |
| |
Science |
|
| At-line measurement |
| |
Autonomous Systems & Controls |
|
| Atmospheric Early Warning System (AEWS) |
|
| Re-engineering support for: AN/FPS-117(V) Long Range Radar,
AN/GSQ-235 Command Information Link, AN/FYQ-93 Processor, Advanced Interface Control Unit (AICU), AN/FPS-124 Unattended Radar (UAR). Components: Circuit card assemblies (CCAs), Power systems, Keyboards, Line printers
|
|
| |
Systems & Sensors |
|
| Atmospheric Modeling |
|
| Develop and apply numerical modeling codes to simulate atmospheric behavior. |
|
| |
Scot Rafkin's Homepage |
|
| Atmospheric Monitoring/Sampling |
| |
Vice President's Office |
| |
Environmental Engineering & Monitoring |
|
| Atomic Force Microscopy (AFM) |
|
| AFM images topography of a surface with nanometer resolution and is used to evaluate surface structure of semiconductors, polymers, adhesive materials, and biological samples. The XE-100 AFM operates in various contact and noncontact modes to measure surface properties. |
|
| |
Systems Research & Products |
|
| Audio & Sound |
|
| Design and testing of audio transducers, microphones, reproduction equipment, amplifiers. Calibration of microphones and accelerometers, and measurement of noise levels. |
|
| |
Applied Physics |
| |
Electronics Systems & Robotics |
| |
Engineering Applications & Systems Development |
| |
Fluids & Machinery Engineering |
| |
Structural Engineering |
|
| Audio Monitoring |
| |
Systems Research & Products |
|
| Audio Surveillance |
|
| Audio Surveillance |
|
| |
Office of the Director |
|
| Audits and Surveillances |
|
| Audits and Surveillances |
|
| |
Division Quality Assurance |
|
| Auto Electronics |
|
| Custom electronic communication and instrumentation equipment development. Design of custom power supplies and power conditioners |
|
| |
EMCS |
| |
Advanced Instruments & Telemetry Systems |
| |
Communications & Embedded Systems |
| |
Network-Centric Systems |
| |
Automation & Data Systems |
| |
Electronics Systems & Robotics |
|
| Auto Testing--Miscellaneous |
| |
Engine, Emissions & Vehicle Research |
| |
Fuel & Fleet |
| |
Engine Lubricants Research |
| |
Fluids & Machinery Engineering |
| |
Fluid Machinery Systems |
|
| Autoignition |
| |
Fuels, Lubricants & Fluids Applications |
| |
Engine, Emissions & Vehicle Research |
| |
Diesel Engineers & Technicians |
| |
International |
| |
Fuel Lab Prof Staff |
| |
Lube Prof Administrative Staff |
|
| Autoignition Tests-ASTM E659 |
|
| Test to determine the temperature at which the product will ignite from heat. |
|
| |
Fuels, Lubricants & Fluids Applications |
| |
Engine, Emissions & Vehicle Research |
| |
Lube Prof Administrative Staff |
|
| autoignition--flammability testing |
|
| Standard Test Method for Autoignition Temperature of Liquid Chemicals per ASTM E659; Temperature Limit of Flammability of Chemicals per ASTM E1232
|
|
| |
Engineering & Research |
|
| Automated Coatings Removal System (ACRES) |
|
| Custom robotic system to automatically remove paint from large aircraft components. Four major subsystems:Media blast, Robotic automation, Component support and fixturing, Component preparation and handling. |
|
| |
Robotics & Automation Engineering |
|
| Automated Dimensional Inspection |
| |
Manufacturing Systems |
| |
Robotics & Automation Engineering |
|
| Automated Driving |
| |
Intelligent Vehicle Systems |
|
| Automated Instrumentation and Custom Test Systems |
|
| Automated sytems to monitor, verify and/or maintain a variety of radio frequency systems. |
|
| |
Communications & Embedded Systems |
|
| Automated Intelligent Forces |
| |
Intelligent Vehicle Systems |
| |
Learning Sciences & Systems |
|
| Automated Mechanical Systems |
|
| Design, develop, and install custom automation systems for product processing, manufacture, inspection, and handling. These systems incorporate robotics, hard automation, and machine vision, as required. Automated Mechanical Transmission retrofit, build, and test. |
|
| |
Fuels, Lubricants & Fluids Applications |
| |
Engine, Emissions & Vehicle Research |
| |
Powertrain Controls |
| |
Manufacturing Systems |
| |
Division Administration |
| |
Robotics & Automation Engineering |
| |
Applied Physics |
| |
Sensor Systems & Nondestructive Evaluation (NDE) Technology |
|
| Automated Optical Inspection |
| |
Manufacturing Systems |
|
| Development of software programs for automated optical inspection machines in a PCBA manufacturing environment. |
|
| |
Aircraft Systems Integration |
|
| Automated Systems |
|
| Design, development, and installation of automated systems. |
|
| |
Intelligent Vehicle Systems |
| |
Integrated Diagnostics |
| |
Manufacturing Systems |
| |
Communications & Embedded Systems |
| |
Intelligent Systems |
| |
Decision Support Technologies |
| |
Robotics & Automation Engineering |
| |
Applied Physics |
| |
Sensor Systems & Nondestructive Evaluation (NDE) Technology |
|
| Automated Video Security |
|
| Computer-automated image analysis or video surveillance including: Perimeter security, Interior security, Under-vehicle security, Safety, and Data Acquisition. |
|
| |
Robotics & Automation Engineering |
|
| Automatic Test Equipment/Systems |
| |
Central Office |
| |
Aerospace Engineering |
| |
Systems & Sensors |
| |
ASD Administration |
| |
Integrated Diagnostics |
| |
Aircraft Systems Integration |
| |
Program Development & Operations |
| |
EIIT Administration |
| |
Communications & Embedded Systems |
| |
Applied Physics |
| |
Sensor Systems & Nondestructive Evaluation (NDE) Technology |
| |
Avionics Systems |
|
| Versatile Avionics Shopt Test (VAST) |
|
| |
Intelligent Systems |
|
| Automatic Transmission Design |
| |
Engine, Emissions & Vehicle Research |
|
| Automatic Transmission Fluids Testing |
| |
Automatic Transmission Fluids Testing |
|
| Automatic Transmission Testing - Assemblies and Components |
|
| Transmission assemblies and components including clutches, pumps, seals, bearings, gears, torque converters, etc. |
|
| |
Drivetrain Design & Development |
|
| Automatic Transmission Testing - Electromechanical/Electrohydraulic clutch systems |
|
| Testing of electromechanical or electrohydraulic clutch systems to make automotive transmissions automatically shift and load the engine. |
|
| |
Powertrain Controls |
| |
Drivetrain Engineering |
| |
Fuel & Oil Inventory |
| |
Specialty & Driveline Fluid Evaluations |
| |
Electromechanical & Optical Systems |
|
| Automation |
| |
Intelligent Vehicle Systems |
| |
Manufacturing Systems |
| |
Robotics & Automation Engineering |
| |
Fluids & Machinery Engineering |
| |
Fluid Machinery Systems |
|
| Automation and Robotics |
|
| Including the following industries and technology areas: Automotive, Food production, Electronics, Aerospace, Defense/military, Packaging and shipping, 3D imaging, Automated surveillance, and Machine vision. Areas of expertise include: Industrial and custom robotics, Automation, controls, and system integration, Custom machine design, Kinematic and dynamic simulations, Process simulations, Vision systems, Machine availability improvement, Surface processing, Process development, Product development, Independent design or system reviews, Human-machine interfaces, and Facility and workcell design. Facilities and tools include: State-of-the-art software for finite element analysis (stress and thermal), Animations based on a 3D CAD model, Dynamic Simulations using 3D solid model geometry, 3-D printing and rapid prototyping, High-speed video, 3D solid modeling software, Machine Shop, High-resolution noncontact 3D measurement system for creating precise 3D models of delicate or critical components, Robotics and automation assembly and testing facilities, and Robotics test bed. |
|
| |
Manufacturing Systems |
| |
Robotics & Automation Engineering |
|
| Automation Engineering |
| |
Process Improvement Engineering |
|
| Automobile Engines |
|
| Design, develop, and test gasoline engines from passenger cars. |
|
| |
Fuels & Energy Development |
| |
Engine, Emissions & Vehicle Research |
| |
Beijing Representative Office |
| |
Marty, S. D. |
| |
Certification Audit & Compliance |
| |
Lube Prof Administrative Staff |
|
| Automotive - Active Safety Systems |
| |
Intelligent Vehicle Systems |
|
| Automotive Coatings |
|
| Low friction and wear resistant coating development, application, testing and consulting for use on automotive powertrain componrnts. Also work in corrosion resistant coating technologies, non-line-of-sight deposition methods, and coatings for glass and polymeric components. |
|
| |
Material Development |
| |
Vice President's Office |
| |
Lube Prof Administrative Staff |
| |
Applied Physics |
| |
Surface Engineering &Materials Chemistry |
|
| Automotive Component EMC Test |
| |
EMCS |
| |
Fluids & Machinery Engineering |
|
| Automotive Component Testing |
| |
Engine Design & Analysis |
| |
Fuel & Fleet |
| |
International |
| |
Electromechanical & Optical Systems |
| |
Fluids & Machinery Engineering |
| |
Structural Dynamics & Product Assurance |
|
| Use of Hardware-In-the-Loop or HIL to test the performance and durability of various vehicle powertrain components as if they were in a vehicle. Including but not limited to electric motors, hydraulic motors, batteries, engines, transmissions, and alternaters. |
|
| |
Gasoline |
|
| Automotive Controls |
| |
Engine, Emissions & Vehicle Research |
| |
Engine & Vehicle R&D |
| |
Powertrain Controls |
| |
Electromechanical & Optical Systems |
|
| Automotive Corrosion |
| |
Materials Engineering |
| |
Environmental Performance of Materials |
|
| Automotive Electronics Testing |
|
| Evaluation of custom electronic instruments or communication equipment. Testing of custom power supplies for automotive applications |
|
| |
EMCS |
| |
Electronics Systems & Robotics |
| |
Fluids & Machinery Engineering |
| |
Structural Dynamics & Product Assurance |
|
| Automotive Electronics--Failure Analysis |
|
| Failure analyses and construction analyses of a wide variety of electronic and electrical components (i.e., automotive, aircraft, space, industrial, military, utility, consumer, etc. |
|
| |
Electronics Systems & Robotics |
| |
Electromechanical & Optical Systems |
|
| Automotive EMC Test--Whole Vehicle |
| |
EMCS |
| |
Systems & Sensors |
| |
Fluids & Machinery Engineering |
|
| Automotive fatigue and vibration analysis |
|
| Root cause analysis of failures and determination of various failure modes. Potential failure modes can be identified and quantified, and resulting failures can be predicted using failure modes and effects analysis (FMEA). Fatigue and vibration testing for a variety of engine and exhaust systems parts and components including: Automotive catalytic converters, Diesel catalyst systems, Diesel particulate filters (DPFs), Flow diverters and mixers, Turbochargers, Reductant delivery systems, Exhaust gas recirculation (EGR) valves and coolers, Cylinder heads, Rocker arms, Crankshafts, Connecting rods, Engine blocks, Intake manifolds, Exhaust manifolds, and Brackets. Vibration testing capabilities include simulation of extreme field environments.
|
|
| |
Emissions R&D |
| |
Design & Development |
|
| Automotive Fire Testing |
|
| Involves liquid fuel and compressedd gases fuel systems. |
|
| |
Fire Resistance |
| |
Fuels, Lubricants & Fluids Applications |
| |
Engine, Emissions & Vehicle Research |
|
| Automotive Security |
|
| Design and testing of cyber security dealing with Controller Area Network (CAN) busses and Electronic Control Units (ECU) as they related to automobiles and heavy machinery. |
|
| |
Embedded & Applications Security |
|
| Automotive Vibration/Acoustic Testing |
| |
Emissions R&D |
| |
Fluids & Machinery Engineering |
| |
Structural Engineering |
| |
Structural Dynamics & Product Assurance |
|
| Autonomous Systems |
| |
Intelligent Vehicle Systems |
|
| VII, IntelliDrive, Smart Highway |
|
| |
Intelligent Vehicle Systems |
| |
Decision Support Technologies |
|
| Autonomous Vehicle--Land |
| |
Intelligent Vehicle Systems |
| |
Engine, Emissions & Vehicle Research |
| |
Advanced Vehicle Technology |
|
| Autonomous Vehicles - Ground |
|
| Autonomous Vehicles - Ground |
|
| |
Intelligent Vehicle Systems |
| |
Aerospace Electronics and Information Technology D |
| |
Robotics & Automation Engineering |
|
| Autonomous Vehicles--Air |
| |
Central Office |
| |
Aerospace Engineering |
|
| Autonomy |
| |
Intelligent Vehicle Systems |
|
| Aviation Fuel Filter/Separators |
|
| Div.08 - API/IP 1581, 1583, and 1590, MIL-PRF-52308J, and SAE ARP 1827A aviation filtration testing, plus additive research; evaluate aviation fuel sensor technology and mechanical devices. |
|
| |
Development and Testing of Aviation Fuel Filters Brochure |
| |
Fuels & Lubricants Technology |
| |
Filtration |
| |
Development and Testing of Aviation Fuel Filters |
| |
Fuel Systems & Contamination Research |
| |
Filtration & Fine Particle Technology |
|
| Aviation Fuel Nozzle Coking Research |
|
| Emphasis is to determine the fouling rate curves for nozzles as a function of fuel temperature and perform endurance tests to evaluate hardware performance |
|
| |
Fuels, Lubricants & Fluids Applications |
|
| Avionic Systems Support |
|
| Including: Integration of the situational awareness data link (SADL) system, Precision engagement (PE), Global air traffic management (GATM), Enhanced global positioning system, Inertial navigation system (EGI), Turbine engine monitoring system, Airborne data recorder (TEMS/ADR), and Head up display (HUD) on the A-10 aircraft. |
|
| |
ASD Administration |
|
| Avionics |
| |
Central Office |
| |
Aerospace Engineering |
| |
Integrated Diagnostics |
|
| Avionics Engine Monitoring System |
| |
ASD Administration |
|
| Avionics--Failure Analysis |
|
| Failure analyses and constuction analyses of a wide variety of electronic and electrical components (automotive, aircraft, space, industrial, military, utility, consumer, and other. |
|
| |
Electronic Warfare Systems Engineering |
| |
Electronics Systems & Robotics |
|
| Axle Development |
| |
Test Stand Development |
| |
Engine, Emissions & Vehicle Research |
|